[GeorgeF_Greece]

Hi there, any suggestions for the "ideal" case for the original Passport?

IMO, such a case should:

a) Be of flip type in order to protect the whole phone (and the screen)
b) Be as light and THIN as possible
c) Have a hole for the notification led
d) Be durable enough

The problem is that I haven't manage to find such a case. Thanks a lot in advance for your contribution.

I currently use the original hard shell, but it does not protect the screen and the phone keeps to frequently unlock when I place the phone in my pocket.

[The_Passporter]

I like this case cause when in the clip holster it is fully protected. If you like the liter look you can go without the holster. If you want to have it sit on an angle facing you as an alarm clock or watch a movie you can slide the phone in the holster reversed with the clip propped with the kickstand. I can find these cases for around $4 US and I order 2 or 3 at a time since the clip part isn't that Strong. I admit I can​ be a bit rough on it.

[sonmort]

I fitted a black rubberised/plastic back cover (bumper is the word I think people call them) and then using my own very sticky wide double sided tape, attached BlackBerry's black leather flip (book style) cover.

With the added bulk of the bumper, I had to carefully align the flip case so that it would close flat. Although the window for the rear camera is slightly off-center, it's wide enough to afford this adjustment so the camera lens is not obstructed in anyway.

I have Stilgut's tempered glass screen cover fitted too.

The combination is still going strong after four years.

Posted via CB10

[anon(5597702)]

TPU gel case

Posted via CB10

[brookie229]

The combination is still going strong after four years.

Passport has not been around for four years, just sayin'.

[Mojarch]

Passport has not been around for four years, just sayin'.

Early model and maybe test device should be almost 4 year old!

Posted via CB10

[brookie229]

Early model and maybe test device should be almost 4 year old!

Posted via CB10

The Passport was released in October 2014, so it is coming up on 3 years. Maybe it just seems like four lol.

Posted via CB10

[nevertoofar]

The original BlackBerry hard case is the best, just my opinion of couse.

Posted via CB10

[Izzudin Hamasah]

I'm use Ringke Fusion its very protective

Posted via CB10

[anon(10252394)]

stilgut ...see on website but buy less $$ on amazon

[Drenegade]

No case is my favorite option. Maybe also helped by the fact that there's almost zero case options for the AT&T Passport.

Posted via CB10

[GeorgeF_Greece]

Stilgut is quite bulky (IMO of course)

[anon(10189247)]

Stilgut is the best leather flipcase.

Posted via CB10

[tegar ramadhanu kariadinata]

full soft case nice and safe for your pp

[emanuel0ss0]

I use just a clear case. Been using it for almost two years. Not one problem.

 Posted via my Red Passport SQW100-1/10.3.3.2163  pin:2C09CE92

[tegar ramadhanu kariadinata]

I use just a clear case. Been using it for almost two years. Not one problem.

 Posted via my Red Passport SQW100-1/10.3.3.2163  pin:2C09CE92

good... i hope i can get it now for clear full case


 Passport SE - SQW-100-4 / 10.3.3.2163