Just bought the Otterbox today and notice the slider doesn't close all the way in turn causes wiggle in the slider when closed. Anyone else jave this problem? Any fixes? Works fine when I take the top plate off (no wiggle).
Posted from my CrackBerry at wapforums.crackberry.com
I have this issue with my Otterbox. The problem is the tab at the bottom of the face plate that causes the screen portion to "lift" a little bit when its closed. You could try it yourself by lifting the screen up a bit without the cover to get the same results.
The only way to fix this is to perhaps file down or break off the tab at the bottom. Of course, this will make the face plate a lot more loose, so you will have to compensate with some glue or double-sided tape. I haven't done this myself, so obviously it's to your own discretion.
The best fix I found was to use a Seidio Innocase instead of the Otterbox. I tried and was excited to use the OB. But a couple major design problems with the top and bottom pieces.
Posted from my CrackBerry at wapforums.crackberry.com
