I thought I read somewhere that size wise exact same as first Tour. I wonder if the cases for Tour will fit this new device or if new cases are needed.
Posted from my CrackBerry at wapforums.crackberry.com
Well I did a little research and have found that the Tour and the new Bold arent exactly the same in dimensions. What this means for cases is unknown, there may be a tiny bit of a problem getting the Tour case to fit the new Bold, we will have to see.
The new Bold is slightly taller but isnt as thick (depth) as the Tour. The width is the same. Im not sure how much of a difference .03 inch would make on the height, only time will tell.
Well I did a little research and have found that the Tour and the new Bold arent exactly the same in dimensions. What this means for cases is unknown, there may be a tiny bit of a problem getting the Tour case to fit the new Bold, we will have to see.
The new Bold is slightly taller but isnt as thick (depth) as the Tour. The width is the same. Im not sure how much of a difference .03 inch would make on the height, only time will tell.
Actually if you look at the metric dimensions on the RIM site they are the same size for both phones:
Well I did a little research and have found that the Tour and the new Bold arent exactly the same in dimensions. What this means for cases is unknown, there may be a tiny bit of a problem getting the Tour case to fit the new Bold, we will have to see.
The new Bold is slightly taller but isnt as thick (depth) as the Tour. The width is the same. Im not sure how much of a difference .03 inch would make on the height, only time will tell.
i think the bold 9700 case should fit the bold 9650 because in the RIM blackberry accessory store, the accessories listed for the bold 9650 are bold 9700 cases because the cases are pictured covering bold 9700
I'm not sure if it will fit. If it is a silicone case it might, but the dimensions seem to be a little off. Only time will tell, though. In the meantime I took a screencap of a comparison I did on the BB website.
i think the bold 9700 case should fit the bold 9650 because in the RIM blackberry accessory store, the accessories listed for the bold 9650 are bold 9700 cases because the cases are pictured covering bold 9700
I used to have the 9700. I do not think the buttons and ports are the same for the 9700 and 9630 and thus even if similar size the cases will not be interchangeable.
i think the bold 9700 case should fit the bold 9650 because in the RIM blackberry accessory store, the accessories listed for the bold 9650 are bold 9700 cases because the cases are pictured covering bold 9700
No, those cases will be different sizes and have different port opening locations..
Posted from my CrackBerry at wapforums.crackberry.com
Isn't the Bold 9650 the exact same size/dimesnions as the Tour 9630? I have a Bold 9700 and Tour 9630 and they are very different in size (and weight).
Isn't the Bold 9650 the exact same size/dimesnions as the Tour 9630? I have a Bold 9700 and Tour 9630 and they are very different in size (and weight).
I just went through and gave the dimensions and web links to back it up. They are on the first page.
To be fair, Moonlessnight's screen cap has different heights compared to Verizon's and RIM's website links I provided. I guess we will just have to take a wait and see approach.
I just went through and gave the dimensions and web links to back it up. They are on the first page.
Yes and I provided the correct metric dimensions right after it which are located in at least two places on the RIM website including in your link. Rim only provides the US dimensions for us dumbos from the USA that can't understand the metric system.
112mm = 4.41 inches, NOT 4.43 inches
Not your fault, RIM's conversion is stated incorrectly for this phone.
Here is the link from their actual press release for the 9650 and the dimensions are only given in metric which is the standard for RIM since they are a Canadian based company:
I went to coveroo.com and got a couple backs / covers for my Tour. Does anyone know if those battery covers (or whatever they are called) will fit the new Bold 9650? I would love to update to the new "Tour" when it arrives, but I don't want to lose out on my investment. Any and all information would be appreciated!
Last edited by TOTCM; 04-30-10 at 08:07 AM.
Reason: added information