1. SES Mobile Accessories's Avatar
    https://www.indiegogo.com/projects/s...2/x/26466605#/

    Thank you all so much for your support of the TYPE I! We look forward to talking about it with you guys!

    Make sure to follow our social media to spread the word!


    LinkedIn - https://www.linkedin.com/company/ses-mobile-accessories

    Twitter - https://twitter.com/ses_mobile

    Instagram - https://www.instagram.com/sesmobileaccessories/

    Reddit - https://www.reddit.com/user/sesmobileaccessories

    Website - sesmobile.com

    YouTube - https://www.youtube.com/channel/UCGs...3yyfg1rjPAJ5xg
    Last edited by SES Mobile Accessories; 06-04-21 at 08:43 PM.
    06-04-21 01:06 PM
  2. Dunt Dunt Dunt's Avatar
    https://www.indiegogo.com/projects/s...2/x/26466605#/

    Thank you all so much for your support of the TYPE I! We look forward to talking about it with you guys!
    Good Luck with it!

    Might show a few more images of it with a phone and how it attaches.... and it being used (typed on).
    06-04-21 01:16 PM
  3. guizmox's Avatar
    First backer I trully hope you can reach your goal ! any initiative to give us a physical keyboard on a phone is a good one !
    06-04-21 01:20 PM
  4. Dunt Dunt Dunt's Avatar
    Ouch on the shipping....
    06-04-21 01:23 PM
  5. guizmox's Avatar
    @SES, did you asked @Bla1ze for a main page post ?
    06-04-21 01:28 PM
  6. SES Mobile Accessories's Avatar
    @SES, did you asked @blaze for a main page post ?
    I have not, no
    06-04-21 01:30 PM
  7. Dunt Dunt Dunt's Avatar
    @SES, did you asked @Bla1ze for a main page post ?

    It's not a BlackBerry.... but he did give the Titan Pocket a spot.

    @Bla1ze might need more information and pictures....

    - Still not clear about the attachment and if there are any limits.. Few more pictures would help and even a partial list of tested phones. Start with today line of iPhones and Samsung's.

    - Show it in action... typing.

    - Side and rear images with a phone in the "holder".
    Bla1ze likes this.
    06-04-21 01:35 PM
  8. bh7171's Avatar
    I have not, no
    I would suggest getting a pre-production unit in Adam @ Tech Odyssey's hand. He's getting a nice following on YouTube.
    06-04-21 01:53 PM
  9. SES Mobile Accessories's Avatar
    It's not a BlackBerry.... but he did give the Titan Pocket a spot.

    @Bla1ze might need more information and pictures....

    - Still not clear about the attachment and if there are any limits.. Few more pictures would help and even a partial list of tested phones. Start with today line of iPhones and Samsung's.

    - Show it in action... typing.

    - Side and rear images with a phone in the "holder".
    Thanks for your questions:

    The device is pretty much universal. We have tested it on phones as big as a Note 10+ and as small as the iPhone SE, all of which work with the TYPE I.

    We will have the images of it in action and side/back images in time
    moosbb likes this.
    06-04-21 02:01 PM
  10. SES Mobile Accessories's Avatar
    I would suggest getting a pre-production unit in Adam @ Tech Odyssey's hand. He's getting a nice following on YouTube.
    We will be distributing pre production units as soon as they are done
    06-04-21 02:02 PM
  11. zer0ten's Avatar
    It's not a BlackBerry.... but he did give the Titan Pocket a spot.

    @Bla1ze might need more information and pictures....

    - Still not clear about the attachment and if there are any limits.. Few more pictures would help and even a partial list of tested phones. Start with today line of iPhones and Samsung's.

    - Show it in action... typing.

    - Side and rear images with a phone in the "holder".
    Indiegogo page clearly states that a working demo has not yet been produced.
    06-04-21 02:03 PM
  12. SES Mobile Accessories's Avatar
    Good Luck with it!

    Might show a few more images of it with a phone and how it attaches.... and it being used (typed on).
    The TYPE I wraps around the phone. The silicone bumper extends to wrap around the sides of the phone. There will be holes on top and bottom to make sure microphones, SIM cards, charging ports, headphone ports, etc are still accessible.

    SES
    06-04-21 02:27 PM
  13. SES Mobile Accessories's Avatar
    Ouch on the shipping....
    Shipping in the US uses USPS Priority Mail shipping, meaning the product will be there within 1-3 days of the mailing date, thus the higher price.

    SES
    06-04-21 02:29 PM
  14. jackbuck93's Avatar
    The TYPE I wraps around the phone. The silicone bumper extends to wrap around the sides of the phone. There will be holes on top and bottom to make sure microphones, SIM cards, charging ports, headphone ports, etc are still accessible.

    SES
    It's hard to tell from the images you have posted because they are renders, but do the phones have that big black square around them when they are attached?

    I will be supporting this for sure. I'm sure everyone here appreciates you putting in the effort to make this happen. However, it really would help to see the real life photos - assuming you have them? - so we can see what it really looks like.

    Great job!
    06-04-21 02:31 PM
  15. SES Mobile Accessories's Avatar
    It's hard to tell from the images you have posted because they are renders, but do the phones have that big black square around them when they are attached?

    I will be supporting this for sure. I'm sure everyone here appreciates you putting in the effort to make this happen. However, it really would help to see the real life photos - assuming you have them? - so we can see what it really looks like.

    Great job!
    The "big black square" is made of silicone and will not have as sharp of corners and will be a lot thinner than it looks now and will surround the smartphone when attached.

    I made a prototype earlier as a demo to show manufacturers but it was very poorly put together (keyboard didn't work, held together with tape, etc). I'll see if I can make a cleaner version that I can show

    SES
    06-04-21 02:39 PM
  16. Laserdrome2's Avatar
    Hey SES, those two screws on the back: Will they hurt when having the phone with the attached slider in the pocket?

    While I have already backed, I agree with the others that a working demo certainly will create more confidence and clarity
    06-04-21 03:24 PM
  17. whatnow00's Avatar
    Thanks for your questions:

    The device is pretty much universal. We have tested it on phones as big as a Note 10+ and as small as the iPhone SE, all of which work with the TYPE I.

    We will have the images of it in action and side/back images in time
    How does it adapt to differently-sized phones?
    06-04-21 03:35 PM
  18. app_Developer's Avatar
    The "big black square" is made of silicone and will not have as sharp of corners and will be a lot thinner than it looks now and will surround the smartphone when attached.

    I made a prototype earlier as a demo to show manufacturers but it was very poorly put together (keyboard didn't work, held together with tape, etc). I'll see if I can make a cleaner version that I can show

    SES
    That would be helpful. Is the back camera(s) on the phone generally still usable? How much does the whole unit weigh and how much of that weight is in the bottom (Just to get a sense for how it will feel in hand)

    Thanks! and congrats on getting this started.
    06-04-21 03:38 PM
  19. john_v's Avatar
    We will be distributing pre production units as soon as they are done
    Hey you're in Lake Zurich (according to your indigogo profile)? I'm in Wauconda, I'll come help you test! Let me know!
    06-04-21 03:58 PM
  20. Ben xfg's Avatar
    I'm surprised... four backers so far including me.
    06-04-21 06:00 PM
  21. SES Mobile Accessories's Avatar
    Hey SES, those two screws on the back: Will they hurt when having the phone with the attached slider in the pocket?

    While I have already backed, I agree with the others that a working demo certainly will create more confidence and clarity
    The screws (From my experience in testing), have not hurt when it's been in my pocket when the screws are facing toward me but I also found it to feel more confortable to have the screws/keyboard facing out with the screen against my legs.

    We will be working to get a demo in due time.

    SES
    06-04-21 07:05 PM
  22. SES Mobile Accessories's Avatar
    That would be helpful. Is the back camera(s) on the phone generally still usable? How much does the whole unit weigh and how much of that weight is in the bottom (Just to get a sense for how it will feel in hand)

    Thanks! and congrats on getting this started.
    Thanks for your questions!

    - It depends on the phone and where the cameras are located. I have found that phones with center cameras (S10, Note 10, etc) have no problems, and have yet to test a phone that has issues with the TYPE I (partially due to there being tons of phones to test out and new phone designs coming out every few months). The slider can be adjusted using the screws to make sure the slider is not in the way of the camera.
    - The whole unit is around 4.5 ounces
    - Half of that weight is in the keyboard, the slider and silicone are disbursed pretty evenly around the phone and it doesn't feel that unbalanced from the phones I have used in testing.

    Let me know if you have any more questions

    SES
    app_Developer likes this.
    06-04-21 07:18 PM
  23. SES Mobile Accessories's Avatar
    Hey you're in Lake Zurich (according to your indigogo profile)? I'm in Wauconda, I'll come help you test! Let me know!
    I'll make sure to let you know
    06-04-21 07:18 PM
  24. SES Mobile Accessories's Avatar
    Make sure to follow us on our social media and spread the word so we can make this happen!

    LinkedIn - https://www.linkedin.com/company/ses-mobile-accessories

    Twitter - https://twitter.com/ses_mobile

    Instagram - https://www.instagram.com/sesmobileaccessories/

    Reddit - https://www.reddit.com/user/sesmobileaccessories

    Website - sesmobile.com

    YouTube - https://www.youtube.com/channel/UCGs...3yyfg1rjPAJ5xg
    Last edited by SES Mobile Accessories; 06-04-21 at 08:40 PM.
    06-04-21 07:35 PM
  25. Chuck Finley69's Avatar
    Hey @the_boon , are you in on this yet?
    06-04-21 07:35 PM
82 123 ...

Similar Threads

  1. SES Mobile Accessories TYPE I PKB Attachment funding starts June 4th!
    By SES Mobile Accessories in forum General BlackBerry News, Discussion & Rumors
    Replies: 33
    Last Post: 06-04-21, 03:25 PM
  2. Blackberry Link configure to sync with Outlook 2016
    By smwall43 in forum BlackBerry Classic
    Replies: 2
    Last Post: 05-24-21, 12:52 PM
  3. WTS: BlackBerry KEY2 Black Edition With Accessories
    By Bob80220 in forum The Marketplace - Buy, Sell & Trade
    Replies: 4
    Last Post: 05-16-21, 07:15 PM
  4. contacts/calender faded in blackberry link and cannot be clicked
    By SUDIN SANGODCAR in forum BlackBerry Passport
    Replies: 2
    Last Post: 05-12-21, 05:01 PM
  5. Blackberry link
    By rogue666 in forum BlackBerry 10 OS
    Replies: 1
    Last Post: 04-29-21, 08:24 AM
LINK TO POST COPIED TO CLIPBOARD