It will have the same SOC, ram, screen (4.03", 1024x600), camera, and dimension. Most likely it is a RIMM respin of the same phone with minor design changes and to study the overall design, board & conn layout, thermal, manufacturability as prototype.
Well, my friend is more involved in the platform and device design so I don't think he has too much inside knowledge on the eventual UI and overall OS stuff. And he is not working for RIMM.
it appears that it is a phone made by snapdragon with specs that companys can buy to test there OS look like it is most commonly used for android devices. which makes sense for OEM's testing their custom build android OS's. Also would work in RIM's case with QNX booted on it. very interesting.....very interesting indeed. cant wait till the news from BBworld starts
The link works.
RIM would leak this anyway as I can guarantee some developers WILL tear down these alpha devices as soon as they get them.
Those specs seem pretty high end to me. I thought RIM would issue a device that is closer to the would-be-low end BB10 devices. If RIM still insists on releasing dumbed down devices on a new OS.
I can see base qualcomm hardware used as alpha device but will not be even 10% close to real thingy..sure the screen size and ration willl be closer to end device but that is just display..
The aspect ratio is interesting though. It uses the same resolution as the playbook. Which isn't really conventional. Its like 15:9 instead of the usual 16:9 so many android phones. hmmmmm. 1024 X 600 in 4" gives it about 294 ppi.
im sorry those specs wont cut it anymore in Q4 2012. 4 inch and that resolution would be just okay if BB 10 launced right now. The first BB10 all touch needs to be between 4.3 to 4.5 inches. The resoul.tiion neess to be 1280x720.
Now the BB10 bold form factor should be between 3.3 to 3.5 inches. The 1024X600 resoultion will do here just fine.
The delay in BB10 to Q4 2012, needs to bring a much neeeded upgrade in hardware specs. RIMM needs to close the hardware spec gap at that time for good. Hardware specs and design do move product. It needs to be a very big satement. T
im sorry those specs wont cut it anymore in Q4 2012. 4 inch and that resolution would be just okay if BB 10 launced right now. The first BB10 all touch needs to be between 4.3 to 4.5 inches. The resoul.tiion neess to be 1280x720.
Now the BB10 bold form factor should be between 3.3 to 3.5 inches. The 1024X600 resoultion will do here just fine.
The delay in BB10 to Q4 2012, needs to bring a much neeeded upgrade in hardware specs. RIMM needs to close the hardware spec gap at that time for good. Hardware specs and design do move product. It needs to be a very big satement. T
These specs aren't bad. Also, realize this is a dev phone. My bet is that the final product will differ quite a bit. They don't want to reveal the final hardware design now, especially since they are giving these dev phones away for free, and that can't be cheap.
Hopefully the screen resolution gets bumped up on the real model. I want at least 720p screen please. My Galaxy Nexus screen is gorgeous and there is no going back to a lower resolution.