Originally Posted by
C_86 ok... you have a 2wire router? BHAHAHAH i know what the issue is...
does it have a built in firewall? when you log in to the router settings, do you see ANYTHING about a firewall anywhere?
If you do, thats why... i used to use a 2wire as well... and its a b*tch towards BBs... essentially the firewall connects to your BB, and doesnt like the ports, and then closes that port so the BB cannot fully connect... had the exact same issue with my old 2wire... you can try to open the port manual through the firewall but i suggest the below...
you need to get the firewall off... so essentially you need to make sure all your settings are correct, your wifi is on, your password is set and all that... you need to call your carrier and have them put the router/modem in "bridge" mode... this will disable the router and BOOM!
you will need to reboot your devices after its put in bridge mode as they need to refresh there IPs...
let me know if that is the case or not