A Real Fix for Broken GPS - Guide v1.0
- ok everything is going perfect up until PartIII A "15. Open Hex Workshop and load the BIN file." is Hex Workshop a program?05-17-09 04:28 PMLike 0
- 05-17-09 04:29 PMLike 0
- towards the end of the "write to phone" process it always gives me the same error "Serious error write aborted".
WTF is this?05-17-09 05:59 PMLike 0 -
- I tried it 5 times with same results and went outside on a clear day and tried to access my gps on google maps and on Beyond 411. No luck on either.
Can anyone tell me what I might be doing wrong?05-17-09 08:58 PMLike 0 - 05-17-09 09:09 PMLike 0
-
- Hey;
Thanks for the info. I couldn't get mine to work and even with this i couldn't get the spc#. Wouldn't save the bin file. i noticed others had the same problem so I did the call to telus and they gave me the # (with the warning if I messed up things it would void warranty).
I used the SPC# they gave me and followed the rest of your guide. All went in good from there and I tried it on my balcony. Got 9 sats in about 5-8 secs. It's great.
Thanks again.
BTW....I'm running
Telus
Curve (red) 8330
v4.5.0.138
Theme: MyjavelinAlpha
BBMaps
BBApp World
poynt (great now with gps working)
Flycast
and More
05-18-09 02:11 PMLike 0 - Hello Heartless Hero, please help me to understand what is wrong. I have read and re-read your instructions to get my GPS working on my new Curve 8330. I have the Navigation service on my phone so it is probably locked to the GPSLogger program. I installed the software and when I try to access I get the message that GPS not supported. So I tried to set up your program to fix my GPS but I guess I just don't know enough to get it all working. My carrier is Verizon and I don't know if I am supposed to run all the stuff that is referred to in the instructions. I downloaded the UniCdma and it works ok. I did the port changing and that worked ok. But when I tried to figure out the QPST 2.7 I downloaded it but it wouldn't run by double clicking on it. What exactly am I supposed to do with it? I know all you people are much more techie than me but I really want to learn how to do this stuff. The warning that came with the QPST really scared me. It said that I would end up screwing up my phone. Don't want to do that. HELP!!!!!!!!!!!!!!! Thanks,
Ray05-18-09 08:31 PMLike 0 - I have tried and tried to get my SPL with unicdma with no luck, it will not read the address that's imputed I've tried several addresses but no luck. I'm on uscc with an 8330 running 4.5.138. All I get is a 0k output file. Anyone have any ideas?
Posted from my CrackBerry at wapforums.crackberry.com05-19-09 09:36 AMLike 0 - I have tried and tried to get my SPL with unicdma with no luck, it will not read the address that's imputed I've tried several addresses but no luck. I'm on uscc with an 8330 running 4.5.138. All I get is a 0k output file. Anyone have any ideas?
Posted from my CrackBerry at wapforums.crackberry.com05-19-09 10:14 AMLike 0 -
Props to HouseApe,
I downgraded .138 and I was able to get my spc, however I'm on USCC, and the guide doesn't have any "settings" for USCC. Anyone out there on USCC, done the guide, if so, with what settings (ALLTEL, Sprint) I tried it with the spring settings and no change. I used the Sprint settings, considering, the .131 OS is a sprint OS.05-19-09 07:41 PMLike 0 - I can't even get the ports to come up in device manager. All I show is:
Bluetooth Communications Port (COM11)
Bluetooth Communications Port (COM5)
ECP Printer Port (LPT1)05-19-09 11:38 PMLike 0 - The only free app that will work on VZW BB Maps and thats it (unless you have the storm then Google maps too)05-19-09 11:41 PMLike 0
-
- I am using:
Curve 8330 from Alltel
Desktop Manager ver. 4.7
Handheld Software ver. 4.5.0.138
QPST 2.7 Build 215
I have read the entire thread and tried the directions over and over an over... I have changed COM ports all over the place... rebooted computer... pulled battery on phone... no luck. QPST Configuration will see the 2 ports when I click on "Add New Port" but it will not let me add them. I get an "Error Enabling Port - There was an error enabling COM(insert number of com port) The port may not be working properly or may be busy." When I look at my ports in Device Manager, all I see is LPT1 and the 2 virtual COM ports for my phone.
I cannot get UniCDMA or BitPim to see my phone either. Desktop manager connects to my phone and I can access my phone's memory card in Mass Storage mode.
Any help would be greatly appreciated.
Thanks,
Jeff05-20-09 02:25 AMLike 0 - any idea the trick on metroPCS without bis / bes using on wap to access internet and mms, etc, without service books for maps?05-20-09 08:24 AMLike 0
- I am using:
Curve 8330 from Alltel
Desktop Manager ver. 4.7
Handheld Software ver. 4.5.0.138
QPST 2.7 Build 215
I have read the entire thread and tried the directions over and over an over... I have changed COM ports all over the place... rebooted computer... pulled battery on phone... no luck. QPST Configuration will see the 2 ports when I click on "Add New Port" but it will not let me add them. I get an "Error Enabling Port - There was an error enabling COM(insert number of com port) The port may not be working properly or may be busy." When I look at my ports in Device Manager, all I see is LPT1 and the 2 virtual COM ports for my phone.
I cannot get UniCDMA or BitPim to see my phone either. Desktop manager connects to my phone and I can access my phone's memory card in Mass Storage mode.
Any help would be greatly appreciated.
Thanks,
Jeff
Posted from my CrackBerry at wapforums.crackberry.com05-20-09 09:42 AMLike 0 -
-
Once again props to HouseApe!
I was able to find 9 sats with BBmaps. Google maps is still hit and miss which sucks, I haven't upgraded back to .138 yet (would that make a difference with Googlemaps??) I have seen on a couple of threads on a couple of boards that Gmaps just doesnt like to work with the internal GPS on the curve. 1)Is that just the way the build of Gmaps is. 2) Have the people that have complained on the other boards not done the 'GPS fix'. 3) Is there something I did wrong?05-20-09 12:18 PMLike 0
- Forum
- Popular at CrackBerry
- General BlackBerry News, Discussion & Rumors
A Real Fix for Broken GPS - Guide v1.0
« Download Contacts from BlackBerry Protect without a Phone
|
Ditching Blackberry for Android or iPhone? Say Why? »
LINK TO POST COPIED TO CLIPBOARD