[CraigAnderson21]

Hello, sorry for distrubing. I was tried to reloading my bb z3 stj100-1 with sic multiwipe, and now it just show red blinks twice and i try using my bb link and it said

(there are no software update for your os)

so i use autoloader from i download in internet, and when i use it, it said

error : failed to read images

error : the OS version is blocked by device.

I was give up, can somebody help me...

P.s sorry for my bad english, i from indonesia.

[Ben xfg]

Hello, sorry for distrubing. I was tried to reloading my bb z3 stj100-1 with sic multiwipe, and now it just show red blinks twice and i try using my bb link and it said

(there are no software update for your os)

so i use autoloader from i download in internet, and when i use it, it said

error : failed to read images

error : the OS version is blocked by device.

I was give up, can somebody help me...

P.s sorry for my bad english, i from indonesia.

Here are all the latest autoloaders, you will need the large zipped file for the Z3.

https://mega.nz/#F!ERomDKaT!YYXwe5p2bUlm_4VW5VfTtw

Open link in the browser of your PC, download the correct file, unzip file after downloading then plug in device and run the file. Your device will be wiped in the process.

Posted via CB10

[conite]

Hello, sorry for distrubing. I was tried to reloading my bb z3 stj100-1 with sic multiwipe, and now it just show red blinks twice and i try using my bb link and it said

(there are no software update for your os)

so i use autoloader from i download in internet, and when i use it, it said

error : failed to read images

error : the OS version is blocked by device.

I was give up, can somebody help me...

P.s sorry for my bad english, i from indonesia.

Here is the specific autoloader you need:

https://mega.nz/#!lUglSaaK!nl7fMn11n...8dHA_qMo9h9FE0

[CraigAnderson21]

But ben xfg, is Z3 support 10.3.3 OS??

[conite]

But ben xfg, is Z3 support 10.3.3 OS??

No. Use my link.

[Ben xfg]

No. Use my link.

Why is it labeled "Z3_10.3.03.3216_STJ 100-1-2" if it isn't for the Z3 STJ 100-1?
I'm probably missing something?

Posted via CB10

[conite]

Why is it labeled "Z3_10.3.03.3216_STJ 100-1-2" if it isn't for the Z3 STJ 100-1?
I'm probably missing something?

Posted via CB10

They were all automatically generated, but I just removed it from the 10.3.3 repository.

[Ben xfg]

They were all automatically generated, but I just removed it from the 10.3.3 repository.

👍

Posted via CB10

[CraigAnderson21]

Thanks so much, conite. I appreciated it!!

I just curious why Z3 isn't support BB 10.3.3?

[conite]

Thanks so much, conite. I appreciated it!!

I just curious why Z3 isn't support BB 10.3.3?

BlackBerry simply chose not to support the chipsets in the Z3 and Z10STL100-1 with this release.

[Jobin m vadath]

i am loaded with 10.3.3,so if i want to reload os,what i have to do?

Posted via CB10

[conite]

i am loaded with 10.3.3,so if i want to reload os,what i have to do?

Posted via CB10

Just do a security wipe.

[Jobin m vadath]

that is same as reloading an os?

Posted via CB10

[conite]

that is same as reloading an os?

Posted via CB10

Yes.

[Jobin m vadath]

Just do a security wipe.

i have done security wiping,back up with link.but after restoring everything fine except default pdf file viewer ,where it had gone no idea.what to do?

Posted via CB10

[conite]

i have done security wiping,back up with link.but after restoring everything fine except default pdf file viewer ,where it had gone no idea.what to do?

Posted via CB10

Download from BlackBerry World.

Btw, never backup and restore with Link. It just puts the problems you wanted to get rid of right back on the device. Always start from scratch.

[Jobin m vadath]

Download from BlackBerry World.

Btw, never backup and restore with Link. It just puts the problems you wanted to get rid of right back on the device. Always start from scratch.

Sorry to ask.scratch means?

Posted via CB10

[conite]

Sorry to ask.scratch means?

Posted via CB10

From zero.

[joeldf]

BlackBerry simply chose not to support the chipsets in the Z3 and Z10STL100-1 with this release.

I thought it was the reduced ram (1.5GB) and internal memory (8GB) that limited the ability to properly load 10.3.3.

The Z3 has a Snapdragon SOC, like all the other BB10s (different variants, of course), except the Z10STL100-1 which used the totally different TI cpu.

[conite]

I thought it was the reduced ram (1.5GB) and internal memory (8GB) that limited the ability to properly load 10.3.3.

The Z3 has a Snapdragon SOC, like all the other BB10s (different variants, of course), except the Z10STL100-1 which used the totally different TI cpu.

The Z3 uses a hybrid OS - the SoC is a qc8230 instead of the qc8960 like all other BB10 devices (except the Passport). Although the Z30 uses the (slightly) faster qc8960T Pro.

And yes, it will technically load, but as you say, the performance results are dreadful. It's definitely not supported though.

[Ignacio Nicolas]

The Z3 uses a hybrid OS - the SoC is a qc8230 instead of the qc8960 like all other BB10 devices (except the Passport). Although the Z30 uses the (slightly) faster qc8960T Pro.

And yes, it will technically load, but as you say, the performance results are dreadful. It's definitely not supported though.

Hey there Conite
i have tried to use the link which you provided , on my BB Z3 , as my BB z3 was dead due to wrong flash few months back
Hereby I am attaching screenshot for same , I have installed your file and it has stuck to this windo from last 1 hr
as of now windows didnt recognize the bb z3 when connected to computer
i have installed link & blend but tp no avail

[conite]

Hey there Conite
i have tried to use the link which you provided , on my BB Z3 , as my BB z3 was dead due to wrong flash few months back
Hereby I am attaching screenshot for same , I have installed your file and it has stuck to this windo from last 1 hr
as of now windows didnt recognize the bb z3 when connected to computer
i have installed link & blend but tp no avail

Power cycle the phone while the autoloader attempts to connect.

[Ignacio Nicolas]

Is it possible to do power cycle when phone is complete brick
And if yes how to do the power cycle
Ihave never tried it before

[Ben xfg]

Is it possible to do power cycle when phone is complete brick
And if yes how to do the power cycle
Ihave never tried it before

Power cycle is just another word for restart or turning it off and on again.

Hold the power button.

[Ignacio Nicolas]

I tried it , but windows says USB device unrecognized, on the autoloader same screen appears as last time
When I press power button for a long time then USB message which I mentioned above appears and there red led on until I stop holding power button
I tried power and volume buttons as well , but nothing happens
When I stop holding these buttons yellow led blinks for 1 second and then red led starts to blink as long as USB cable is connected to it