Z10 black to white lcd compatibility

I took my LCD apart and it says 001/111 now on etradesupply.com I can order the front housing and digitizer but it doesn't say whether it's the 111/001 type lcd. Does it matter what LCD I order as long as the Z10 is the LTE version.

See pic below
Attachment 277737

Pin:2B957637

Attachment 277738

Pin:2B957637

anybody

Pin:2B957637

Somebody

Pin:2B957637

Do they have a chat option or a place to ask or call for support questions?

Originally Posted by F2

Do they have a chat option or a place to ask or call for support questions?

I'm talking to them now......they are in Hong Kong but I don't think they understand my questions I seems like the representative is merely guessing

Pin:2B957637

One of the Ambassadors replaced his screen. You might be able to find the thread. It might have some clues.

The thread

http://forums.crackberry.com/blackbe...myself-896629/

I *think* this is what you need, unless the white frame middle plate has been damaged.
Attachment 277858

Depending of your location, you may also consider some aftermarker repair shop, some reported in the linked thread it was (over all, if you add tools like dedicated screw drivers) just a small amount more expensive ...

Originally Posted by Superfly_FR

I *think* this is what you need, unless the white frame middle plate has been damaged.
Attachment 277858

Depending of your location, you may also consider some aftermarker repair shop, some reported in the linked thread it was (over all, if you add tools like dedicated screw drivers) just a small amount more expensive ...

I'm in cleveland Ohio there and phone repair shop but they would charge 100 in labor to replace the screen. I've replaced the lcd or housing every bold with the exception of the 9650 and 9790. I already have taken the the 100-3 Z10 4G apart the screen is 001/111.
I have emailed the supplier they haven't got back to me with a specific response yet though. I whit screen and digitizer and bezel /middle plate that I want does not have the specific screen type listed on the description. I wanted to assume since I was basically doing a board swap and white variant only comes in 3G and 4G that it would be safe to assume it's compatible.


Pin:2B957637

Attachment 277875

Originally Posted by Superfly_FR

I *think* this is what you need, unless the white frame middle plate has been damaged.
Attachment 277858

Depending of your location, you may also consider some aftermarker repair shop, some reported in the linked thread it was (over all, if you add tools like dedicated screw drivers) just a small amount more expensive ...

I'm using the black version and that is the version that I have already the dilemma is switching to the white version one on the top of the page that comes with the bezel screen middle plate so all I would be doing is a board swap really

Pin:2B957637

I would go for the one that matches what you have now in terms of color and 3g/4g/etc models.

OK I just did this for mine. It was $35 shipped off eBay. Do it. Sooooo easy!!!! Like matter of 3mins or so. http://m.ebay.com/itm/261386173143?txnId=1429612999016

Posted via CB10

What version LCD came with it

Pin:2B957637