Screen Ripple tweak that worked!!
Not sure if this was touched on, but I am extremely surprised and very happy.
Having had the storm, I adjusted the Torx screw on it for corner/edge clicking. Well, my tour had a fair amount of ripple in the corners when pushing the trackball and end buttons. I looked at my coworkers today and saw that his had some, but not as much as mine so I decided to try something. First off, I noticed that with the battery cover off I could put a little pressure in certain spots on back and stop the ripple effect from button pushing. I removed the 4 torx screws on back and found that one of them (upper right) was a little stripped or generally tough to get out. When I pulled all 4 out, I made sure to move this one to the bottom and a better one to the top. Much to my surprise, I have all but eliminated the ripple from pushing any of my buttons. I mean I really really have to look to see anything. I also notice my trackball does click more firmly. I have never had an issue with the trackball, but I did notice this.
Now, I am not saying that everyone has a stripped torx screw or that you should even touch any of them, but for those that have the ripple, you may want to swap them around and see what happens.
I had first tried tightening and loosing them, but it did not fix everything.