1. mnew25's Avatar
    i have read all over that having the sim card is unneccesary and gets rid of the SIM card rejected error message...however, i dont really know how i can get it out...it seems pretty secure under that metal casing...help please?
    01-26-09 12:11 PM
  2. waremaster's Avatar
    You take the battery out and the card slides in the direction of the battery. Try pushing on it with a pencil eraser end it will slide out.
    01-26-09 12:13 PM
  3. paulmike3's Avatar
    use very light pressure, and a pencil eraser.
    01-26-09 12:13 PM
  4. mnasholm's Avatar
    Or stick a piece of paper under it, press down and pull. Comes right out
    01-26-09 12:14 PM
  5. mclarryjr's Avatar
    There should be a little tab on the side you pull out. I used needle nose to pull out the sim card from that tab. Don't pull to hard you might tear off the tab which I did once.
    01-26-09 12:27 PM
  6. xattica's Avatar
    You can use an screwdriver and hammer. Use it hard.
    Also I provide a SIM Card removal service for $79.99.
    Just kidding, the pensil eraser is the best way.

    Posted from my CrackBerry at wapforums.crackberry.com
    01-26-09 12:32 PM
  7. BBartist's Avatar
    I was always wondering how to get that out...eraser huh, might want to give it a shot just to see.
    01-26-09 12:34 PM
  8. coevers's Avatar
    A pair of tweezers with a gentle pull works well too.
    01-26-09 05:27 PM
  9. xxfire's Avatar
    little strip of tape works too.. and if you keep the tape on it.. you can re-use it !!!
    01-26-09 05:31 PM
  10. BBSchase373's Avatar
    You can use an screwdriver and hammer. Use it hard.
    Also I provide a SIM Card removal service for $79.99.
    Just kidding, the pensil eraser is the best way.

    Posted from my CrackBerry at wapforums.crackberry.com
    I hear that the hammer and screwdriver trick to the camera lens makes it faster also
    01-26-09 06:16 PM
  11. y2bandit's Avatar
    eraser or sweaty hands
    01-26-09 06:51 PM
  12. karalinagirl's Avatar
    ooh, helpful thread. I didn't have a pencil eraser handy, so I used paper slid under the card...it came right out!
    Thanks!!
    01-26-09 06:58 PM
  13. y2bandit's Avatar
    If you have scotch tape, that can work as well.
    01-26-09 07:06 PM
  14. VeeJaySee's Avatar
    Nice tips!

    I just used my fingernails on both sides of the SIM card, and then pushed. It came right out!
    02-13-10 02:09 PM
  15. ekim2010's Avatar
    Tooth pick woulda work too.
    02-13-10 03:06 PM
  16. catusjack's Avatar
    on a 9650 Bold you need to lift up the corner that's cut off to get it over a small ridge, then it sides right out. I just turned mine over and slide it back as to disengage it from the circuit and store it.
    06-30-10 10:40 AM
LINK TO POST COPIED TO CLIPBOARD