i have read all over that having the sim card is unneccesary and gets rid of the SIM card rejected error message...however, i dont really know how i can get it out...it seems pretty secure under that metal casing...help please?
Printable View
i have read all over that having the sim card is unneccesary and gets rid of the SIM card rejected error message...however, i dont really know how i can get it out...it seems pretty secure under that metal casing...help please?
You take the battery out and the card slides in the direction of the battery. Try pushing on it with a pencil eraser end it will slide out.
use very light pressure, and a pencil eraser.
Or stick a piece of paper under it, press down and pull. Comes right out
There should be a little tab on the side you pull out. I used needle nose to pull out the sim card from that tab. Don't pull to hard you might tear off the tab which I did once.
You can use an screwdriver and hammer. Use it hard.
Also I provide a SIM Card removal service for $79.99.
Just kidding, the pensil eraser is the best way.
Posted from my CrackBerry at wapforums.crackberry.com
I was always wondering how to get that out...eraser huh, might want to give it a shot just to see.
A pair of tweezers with a gentle pull works well too.
little strip of tape works too.. and if you keep the tape on it.. you can re-use it !!!
I hear that the hammer and screwdriver trick to the camera lens makes it faster also
eraser or sweaty hands
ooh, helpful thread. I didn't have a pencil eraser handy, so I used paper slid under the card...it came right out! :)
Thanks!!
If you have scotch tape, that can work as well.
Nice tips!
I just used my fingernails on both sides of the SIM card, and then pushed. It came right out!
Tooth pick woulda work too.
on a 9650 Bold you need to lift up the corner that's cut off to get it over a small ridge, then it sides right out. I just turned mine over and slide it back as to disengage it from the circuit and store it.