Before everybody flames me lol read what i am writing
Does anybody know how to get rid of the Activation required on an unlocked Telus Storm ?
The ##000000 trick doesnt work on it because the msl code (000000) is different.
Anybody knows the Telus one ?
1. Install your blackberry desktop manager. (Im using version 4.7 and it hasnt given me any problems.) Plug In blackberry.
2. Run desktop manager
3. Minimize DM and run uniCDMA
4. Select "Qualcomm" under the mode drop menu
5. Click setup and change the port to com4
6. Click Read all and it should fill in the boxes on the left with your blackberry information
7. Click HF ->DM
8. Click memory and change the starting address to 0x17c47cce and length to 524288. Click read and save to file.
9. Now open Hexworkshop and open the file you just created.
10. In the right box you will see a 6 digit number. That is your MSL password.
11. Unplug your blackberry and call ##XXXXXX (XXXXXX is the MSL password) Press Send
12. Change the Mobile Directory Number to you 10 digit cell number.
13. Press Menu then close and it will reset your phone and you are good to go.
Hope this helps. Let me know if you have any problems and ill try to help. Im not totally sure if your MSL code will be in the same area as mine so if not let me know and i can find some number adjustments for you.
I did everything you said, but after opening the file with Hex, the right column only had 0s and no 6 digits number..
Then again, as I was clicking DM it kept saying "failed to enter DM Mode!"
Any fix ?
im not sure if it needs to be but try going to CDMA mode and in hex workshop you might have to search through the right side a bit to find the number but it will be 6 digits in the middle of everything. if you cant find it upload me the file and ill have a look for it. might need to specify a different location to search
im not sure if it needs to be but try going to CDMA mode and in hex workshop you might have to search through the right side a bit to find the number but it will be 6 digits in the middle of everything. if you cant find it upload me the file and ill have a look for it. might need to specify a different location to search
Yeah it gives me a .bin file that hex opens but theres no 6numbers whatsoever.
Ill keep looking thanks for the help . If i cant find it ill send you the .bin file.
But yeah as far as going into CDMA mode what do you mean by that ?
Yeah it gives me a .bin file that hex opens but theres no 6numbers whatsoever.
Ill keep looking thanks for the help . If i cant find it ill send you the .bin file.
But yeah as far as going into CDMA mode what do you mean by that ?
try putting the start location as 0x17c455be. by CDMA mode i mean take it off of GSM and then try dumping the file.
did you solve the problem with it connecting to the network?
hey, where did you get your telus unlocked?
do you mind sharing it?
thanks
if they were unlockable i would love to tell you where but I myself can find nobody that can unlock them yet. The ones floating around most likely came that way from factory. Give it some more time. if i find any information ill let you know.
UPDATE: rolandj PMed me the MSL code and it WORKED!!!
So BIG BIG BIG BIG thank you from me for guiding me through everything and coming through when I couldnt figure it out.
You have all my gratitude I owe you.
Okay, someone give me the cliffnotes... but point is, everytime I activate a Telus device, it's *22803, 1 for engrish, 1 to active/2 to update roaming lists.
where are you having these troubles. if you follow the above steps to get your MSL code then use it add the phone number in and it will fix the problem. let me know which step you are having trouble with or if you need to send me the file that uniCDMA dumps and ill find it in there for you.