1. cornhuskur's Avatar
    When I had the Z30, I downloaded an OS leak to my computer, extracted the file and uploaded it to my BB, no problem.

    Well, I'm attempting to do the same with my q10. Here's the problem, I downloaded the leak to my computer, extracted it, but when I go to open the file, my computer is telling me if I want to make changes to my computer and the black box prompt is not showing up? I know this is a vague explainition, but what could I be doing wrong? I've downloaded 10.2.1.2228. Please help, it's driving me nuts!!!!!

    BTW...I've followed the instructions and also had no issues with my Z30.
    04-07-14 08:30 PM
  2. anon721037's Avatar
    I would re download the leak you want again and retry, delete the one that is not working.
    04-07-14 08:34 PM
  3. RegN's Avatar
    Your phone was plugged in? I make sure link is turned off for auto start when phone is connected as well

    Reg Q10SQN100-1/10.2.1.2141
    04-07-14 08:40 PM
  4. cornhuskur's Avatar
    Thanks for the help. Deleted and downloading again
    04-07-14 09:28 PM
  5. anon721037's Avatar
    Let us know how it goes.

    Posted on my Z30 on Z30STA100-5/10.2.1.2947
    04-07-14 09:46 PM
  6. cornhuskur's Avatar
    Still same issue. I have a real dumb question to ask: do I need To have my phone registered with Blackberry Link in order for me to proceed? I do have BB Link loaded onto my PC, but the phone is not registered with it.

    Thanks again.
    04-07-14 11:32 PM
  7. anon721037's Avatar
    I'm not sure, but go ahead and associate it just make sure link is closed when doing stuff.

    Posted on my Z30 on Z30STA100-5/10.2.1.2947
    04-08-14 10:02 AM
  8. Jr1202's Avatar
    Sounds like a personal problem like w/ your computer IF YOU'RE ON A XP THERE'S ALWAYS GOING TO BE A PROMPT LIKE YOU SAID & IF THERE ISN'T THAT IS BECAUSE THE SECURITY IS NOT ENABLED BUT THAT DOESN'T MEAN IT WON'T LAUNCH/RUN THEN TELL YOU TO PLUG UP THE DEVICE

    Be more specific as to what isn't working

    2228 was released to T-MOBILE in the U. S. where I am a week & a half ago but saw no changes from the leak I had before which was old like 10.2.1.2157 or something & it being the first official software release I've had since I purchased it in October I eagerly just loaded the release of 2758 2674 WHICH I REPEAT IS AN OFFICIAL SOFTWARE w/ Sachesi using Country & Carrier codes & still see no changes So I'd wait out on a FULL 10.3 AUTOLOADER but I got 2228 OTA & like I said wasn't much of a change

    2228 is outdated in my opinion SO HERE ARE THE AUTOLOADER LINKS

    For 2947

    Z10 https://mega.co.nz/#!QQlzgRLA!NUlYqX...xae-hBab-u4T5M

    Z30 https://mega.co.nz/#!NYs1hJYL!JNbUIE...Z-BwHGOnEvUvP8

    Q10 https://mega.co.nz/#!JEEUBTCT!BAVbPC...Z4cdpG4Cw7ptTY

    For Sachesi bar os 2947 https://mega.co.nz/#!tQVQTRhJ!P-k5Y0...Xt29ZcWQDLESSg Don't recommend because I like the Autoloader method better BUT BECAUSE MY MAIN COMPUTER IS A MAC ON MAVERICKS SACHESI IS WHAT I HAVE BEEN TRYING TO BARE W/ FOR THE PAST FEW DAYS EVEN THOUGH I'VE DONE PLENTY OF INSTALLINGS OF LEAKS SIMPLY W/ MY XP FOR MY Q10

    OVERALL IF YOU'RE XP ISN'T SHOWING YOU ANY LOVE GET HOLD OF A MAC, download qt & 1.1.2 Sachesi from Sachesi: Firmware Extractor, Searcher and Installer » Qtness Development ONLY IF YOU KNOW HOW TO USE & just load bar files of whatever leak you want from there but you have to search forums for those because even though there are 10.3 bars WHICH IS THE LATEST LEAK most don't work so I'm not gonna post the link for those
    04-08-14 11:17 PM
  9. cornhuskur's Avatar
    Please don't throw rotten food at me for telling y'all this, but I was using the wrong 7 zip. Installed the correct one and now up and running with 1925. Will change OS to a more recent one in the near future. Thanks again for all your help.
    04-09-14 09:27 PM
  10. anon721037's Avatar
    Please don't throw rotten food at me for telling y'all this, but I was using the wrong 7 zip. Installed the correct one and now up and running with 1925. Will change OS to a more recent one in the near future. Thanks again for all your help.
    Hey right on , glad you figured it out,
    04-09-14 10:06 PM
LINK TO POST COPIED TO CLIPBOARD