11-06-15 10:39 AM
49 12
tools
  1. Jasper-Ng's Avatar
    A picture of the front of the hard case?
    10-31-15 09:57 AM
  2. anon(3630135)'s Avatar
    Yes please. I am specifically interested on the details where the cases snap to the phone. In my experience any movement at all (no matter how micro) causes wear on the phone when you remove the case after a while. The pouch is for sure has no risk of wear on the phone. The hard shell makes me a little nervous. The flip case I am very curious most of all if it is a full snap on through the length or it is tabbed to snap at specific locations?

    Thanks for your photos OP!
    10-31-15 10:06 AM
  3. jonwb's Avatar
    I would prefer to get one of the hard cases (and a screen protector), but in the pics on Shop Blackberry, the hard case looks like it makes the phone significantly bigger... In the pics from this thread it doesn't look too bad though. Also, on the shop blackberry site it looks like the hard case has it's own buttons (see below), but in the pics on page 1 of this thread it does not look like it does.
    Got my first batch of PRIV original accessories-capture.jpg
    10-31-15 10:23 AM
  4. weezul's Avatar
    can you send me a black leather pouch to the UK? pleeeease
    10-31-15 10:47 AM
  5. anon4226395's Avatar
    Yes please. I am specifically interested on the details where the cases snap to the phone. In my experience any movement at all (no matter how micro) causes wear on the phone when you remove the case after a while. The pouch is for sure has no risk of wear on the phone. The hard shell makes me a little nervous. The flip case I am very curious most of all if it is a full snap on through the length or it is tabbed to snap at specific locations?

    Thanks for your photos OP!
    Top, and both sides (with cutouts for the side controls) Happy to reply with a pic (abc401 at rogers.com)
    10-31-15 12:06 PM
  6. Renwick's Avatar
    This is from the front. It simply snaps in (both part).
    Got my first batch of PRIV original accessories-img_20151030_155017.jpg
    Elite1 likes this.
    10-31-15 01:11 PM
  7. Jasper-Ng's Avatar
    Thanks for the photo!

    How does it look without the front portion? Thinking of using the hard slide case without the top slider part, just the back
    10-31-15 01:39 PM
  8. anon(3630135)'s Avatar
    Can you tell us what the inside of the pocket lining is like? Is it padded on both sides or simply microfibre on leather inside? Thanks
    10-31-15 02:12 PM
  9. tomatogunk's Avatar
    Got my case delivered in the mail yesterday. Here are some side-by-side comparison photos of the case and passport.

    Got my first batch of PRIV original accessories-dscf5418.jpgGot my first batch of PRIV original accessories-dscf5419.jpgGot my first batch of PRIV original accessories-dscf5420.jpgGot my first batch of PRIV original accessories-dscf5421.jpgGot my first batch of PRIV original accessories-dscf5422.jpgGot my first batch of PRIV original accessories-dscf5423.jpgGot my first batch of PRIV original accessories-dscf5424.jpgGot my first batch of PRIV original accessories-dscf5425.jpgGot my first batch of PRIV original accessories-dscf5426.jpgGot my first batch of PRIV original accessories-dscf5427.jpgGot my first batch of PRIV original accessories-dscf5428.jpg
    10-31-15 02:21 PM
  10. Renwick's Avatar
    Can you tell us what the inside of the pocket lining is like? Is it padded on both sides or simply microfibre on leather inside? Thanks
    Microfibre.
    anon(3630135) likes this.
    10-31-15 03:18 PM
  11. jonwb's Avatar
    Got my case delivered in the mail yesterday. Here are some side-by-side comparison photos of the case and passport.
    Thanks for the pics! Dang, it looks like that hard case makes the phone quite a bit wider. It surely is tricky doing a hard case (or a case of any sort really) on a slider.
    10-31-15 03:22 PM
  12. nward2010's Avatar
    [QUOTE=tomatogunk;12032575]Got my case delivered in the mail yesterday. Here are some side-by-side comparison photos of the case and passport.

    ___________

    I see your bullets came off your Passport case like mine did. Are they same kind on the Priv hard shell as the Passport shell (cheap sticker pieces) ?

    RED  Q5 SQR100-2/10.3.2.2789 on Bell Mobility Network
    10-31-15 03:26 PM
  13. John Vieira's Avatar
    [QUOTE=nward2010;12032741]
    Got my case delivered in the mail yesterday. Here are some side-by-side comparison photos of the case and passport.

    ___________

    I see your bullets came off your Passport case like mine did. Are they same kind on the Priv hard shell as the Passport shell (cheap sticker pieces) ?

    RED  Q5 SQR100-2/10.3.2.2789 on Bell Mobility Network
    I also got my case yesterday. The hard shell does not have any bullets, it's simply an open space to show through the back of the Priv.

    I have a Huawei ascend g7, and it basically fits whithin a millimeter in the case, therefore the same size as the Priv.
    10-31-15 03:51 PM
  14. nward2010's Avatar
    I see bullets on the Priv hard shell pics above. Only cut out is for the camera. What kind of shell did you buy?

    RED  Q5 SQR100-2/10.3.2.2789 on Bell Mobility Network
    10-31-15 03:57 PM
  15. BriniaSona's Avatar
    What do you guys mean by bullets?
    10-31-15 04:04 PM
  16. hugh_jorgan's Avatar
    I received my leather swivel holster and sync pod with cable from the crackberry canada site. Great prices for newly released stuff, and their customer support is excellent. I've been buying from them for a couple of years now, and free shipping has always arrived really fast, usually the next day. No I don't work for them. Just impressed with them, so wanted to give a shout out.


    Posted via CB10
    10-31-15 04:09 PM
  17. nward2010's Avatar
    What do you guys mean by bullets?
    The 7 little silver pieces that make up the  logo on the back of the case.

    RED  Q5 SQR100-2/10.3.2.2789 on Bell Mobility Network
    10-31-15 04:10 PM
  18. BriniaSona's Avatar
    The 7 little silver pieces that make up the  logo on the back of the case.

    RED  Q5 SQR100-2/10.3.2.2789 on Bell Mobility Network
    Oh okay.

    Do you get an email when something ships from shopCB?
    10-31-15 04:12 PM
  19. anon(679606)'s Avatar
    Looks-like the case above covers up the edges... so much for the edge app & notification support...

    Posted via CB10
    10-31-15 04:13 PM
  20. jonwb's Avatar
    Looks-like the case above covers up the edges... so much for the edge app & notification support...

    Posted via CB10
    wow... you are a joy...

    If you look at the super secret picture below (from shop.blackberry.com), you can see that the edges are fully accessible.

    Got my first batch of PRIV original accessories-capture.jpg
    10-31-15 05:45 PM
  21. anon(679606)'s Avatar
    That is good to know... it is an honor to bring joy... sometimes
    10-31-15 05:47 PM
  22. nward2010's Avatar
    Oh okay.

    Do you get an email when something ships from shopCB?
    No. But you can call them. Customer Support is fantastic at shopCB.

    RED  Q5 SQR100-2/10.3.2.2789 on Bell Mobility Network
    10-31-15 06:00 PM
  23. BriniaSona's Avatar
    Ill have a to find a good place to drill a hole for a wii lanyard. Been doing that wince the Z10.
    10-31-15 06:35 PM
  24. mavsguy842's Avatar
    Do the leather pouches allow access to the headphone jack? I can tell there's a cutout for the micro USB port.

    Posted via CB10
    11-06-15 10:39 AM
49 12

Similar Threads

  1. Replies: 8
    Last Post: 11-10-15, 03:21 PM
  2. I want to trade in my passport to getting the PRIV, is it make sense?
    By CrackBerry Question in forum BlackBerry Priv
    Replies: 4
    Last Post: 10-30-15, 04:32 PM
  3. BB Link for Priv? Syncing?
    By APalindrome in forum BlackBerry Priv
    Replies: 2
    Last Post: 10-30-15, 02:46 PM
  4. Syncing the Priv?
    By CrackBerry Question in forum BlackBerry Priv
    Replies: 1
    Last Post: 10-30-15, 02:16 PM
  5. Contact Groups on Priv
    By Needkeys in forum BlackBerry Priv
    Replies: 1
    Last Post: 10-30-15, 01:25 PM
LINK TO POST COPIED TO CLIPBOARD