1. jhorne00's Avatar
    Has anyone found a good dashboard holder for the Priv. I have tried a few but the side arms sit right at the volume down button which then lowers the volume to zero.

    Posted via the CrackBerry App for Android
    04-14-16 11:47 PM
  2. Thud Hardsmack's Avatar
    You can try looking at a few of these, there's at least five that won't touch the volume buttons. Not sure what kind of base you'd prefer so here's the lot of them.
    04-15-16 01:52 AM
  3. jabbs1's Avatar
    I've used the Brodit (Pro Clip) for years and for multiple different phones. They are customized to fit each vehicle and phone. The product is very durable and holds the phone nice and snug, and nothing to adjust, the phone just slides in and out. There's even a version that comes integrated with a charger.

    They are a tad more expensive but definitely worth it because they are top of the line. List*BlackBerry*Priv*|*Brodit
    The retail site for the US is Car Phone Holders and Dashboard Phone Mounts*-*ProClip USA
    tigrute and jhorne00 like this.
    04-15-16 09:09 AM
  4. tigrute's Avatar
    My Proclip mount has been working great for the Priv. Once you get a good pedestal and dash mount, you can change out the phone mount easily, so the overall expense isn't terrible.
    jhorne00 likes this.
    04-15-16 10:08 AM
  5. Ecm's Avatar
    I picked up this one when I got my Passport, as width didn't matter.
    http://www.amazon.com/iBOLT-Connect-...UvbUpU12387236

    It works great with my Priv as well. Cased or naked. And it obviously doesnt touch any buttons.
    04-15-16 10:37 AM
  6. jhorne00's Avatar
    Thanks for the replies everyone. I will check out the suggested holders and make a choice.

    Posted via the CrackBerry App for Android
    04-15-16 10:41 AM
  7. Xadion's Avatar
    There are some on amazon and eBay that look good that are also Qi chargers!

    Posted via the CrackBerry App for Android
    04-15-16 10:47 AM
  8. shabbs's Avatar
    04-15-16 10:56 AM
  9. jonty12's Avatar
    There are some on amazon and eBay that look good that are also Qi chargers!

    Posted via the CrackBerry App for Android
    I couldn't see any that didn't seem to have "middle" supports. They all look like they'd hit PRIV volume buttons.
    jhorne00 likes this.
    04-15-16 11:04 AM
  10. jhorne00's Avatar
    I just ordered a ProClip and mount. I am excited to finally have a guality mount after trying a few plastic cheapos. Thanks for the post.

    Posted via the CrackBerry App for Android
    04-15-16 11:36 PM
  11. jhorne00's Avatar
    I've used the Brodit (Pro Clip) for years and for multiple different phones. They are customized to fit each vehicle and phone. The product is very durable and holds the phone nice and snug, and nothing to adjust, the phone just slides in and out. There's even a version that comes integrated with a charger.

    They are a tad more expensive but definitely worth it because they are top of the line. List*BlackBerry*Priv*|*Brodit
    The retail site for the US is Car Phone Holders and Dashboard Phone Mounts*-*ProClip USA
    Just ordered. Thanks for the links.

    Posted via the CrackBerry App for Android
    04-15-16 11:37 PM
  12. jhorne00's Avatar
    My Proclip mount has been working great for the Priv. Once you get a good pedestal and dash mount, you can change out the phone mount easily, so the overall expense isn't terrible.
    Thanks for posting. Ordered one tonight.

    Posted via the CrackBerry App for Android
    04-15-16 11:39 PM
  13. xACiD's Avatar
    i use a kenu airframe+. it's a pretty minimal which i like. so far holds pretty well.

    http://www.amazon.com/Kenu-Airframe-...UvbUpU12390729
    04-16-16 02:19 PM
  14. IndianTiwari's Avatar
    I picked up this one when I got my Passport, as width didn't matter.
    http://www.amazon.com/iBOLT-Connect-...UvbUpU12390738

    It works great with my Priv as well. Cased or naked. And it obviously doesnt touch any buttons.
    Thanks . I will order it soonest as this is the most most suitable for both my Passport SE and the Priv.

    Blackberry Priv on Etisalat 4G Network
    04-16-16 02:31 PM
  15. zyad's Avatar
    Thanks . I will order it soonest as this is the most most suitable for both my Passport SE and the Priv.

    Blackberry Priv on Etisalat 4G Network
    Before you do, consider this one:
    https://www.amazon.ca/gp/aw/d/B015E5...UvbUpU12391000

    I'm using it for both my Passport SE and Priv and it works great, has good release mechanism and comes with 3 different mounting options and was very affordable.
    Not sure how much it woukd cost from Amazon where you are.

    Posted via the CrackBerry App for Android
    04-16-16 06:37 PM
  16. mycj7's Avatar
    I like that Brodit fixed mount one with the charging port. Any idea if it works with either of the BlackBerry cases?

    Posted via the CrackBerry App for Android
    04-20-16 08:09 PM
  17. jabbs1's Avatar
    I like that Brodit fixed mount one with the charging port. Any idea if it works with either of the BlackBerry cases?

    Posted via the CrackBerry App for Android
    That's the only downside to proclip/brodit mounts, they are designed specifically for each phone to fit snug in them so no cases will work. Because of this I use the smart flip case for my priv since it's the easiest to remove, so I just snap it off when I'm driving and pop it into the dash mount.
    04-21-16 10:34 AM
  18. mycj7's Avatar
    That's too bad. Thanks for the reply.

    Posted via the CrackBerry App for Android
    04-21-16 10:26 PM
  19. Jesterbomb's Avatar
    I use the brodit/proclip products as well, I have a holder for each of my blackberry's and I move the holder for whatever phone I am using into whatever car I choose to drive. I have each cradle attached to their locking "move" clip, so that's easy.

    I *just* ordered a PRIV a few days ago, but i'm going to wait until it gets here and I choose a case. Proclip has "universal" models that adjust for width, but have the same slotted holders as the other clips they have, but with several thicknesses to accommodate phones.

    So, once I choose a case for my PRIV, i'll just measure how thick and wide it is, then call up Proclip and get a universal that will accommodate the combination.

    Voila, problem solved. I did the same thing for my Q10 back in the day.

    Posted via CB10
    FF22 likes this.
    04-22-16 12:49 AM
  20. jgcotton's Avatar
    Radmo mount works for all phones and fits easily fits into CD slot with CD still able to play...
    Radmo: The Perfect Mobile Phone Mount For Your Car

    http://www.amazon.com/Radmo-Classic-...UvbUpU12398802
    04-22-16 12:57 AM

Similar Threads

  1. Why are my calls not being saved in the call log?
    By CrackBerry Question in forum BlackBerry Classic
    Replies: 2
    Last Post: 04-18-16, 11:29 PM
  2. BlackBerry 9900 flashes led light 3 times and repeats the process all over again?
    By CrackBerry Question in forum BlackBerry Bold Series
    Replies: 2
    Last Post: 04-15-16, 01:17 PM
  3. Where are the TT in new Twitter versin ?
    By elhot69 in forum General BlackBerry News, Discussion & Rumors
    Replies: 0
    Last Post: 04-14-16, 11:04 PM
  4. Twitter for BlackBerry 10 updated to add new features
    By CrackBerry News in forum CrackBerry.com News Discussion & Contests
    Replies: 0
    Last Post: 04-14-16, 11:00 PM
LINK TO POST COPIED TO CLIPBOARD