Playbook and USB connection issues - SOLVED
So my Playbook will not show up as either a Network drive, or in Desktop manager. I have 6.0.2.42 of Desktop manager and have reinstalled many times...if anyone has any suggestions, please let me know.....tried multiple USB cables......it makes the USB noise when plugged in, but doesn't seem to show up.....
So here is the fix.....................apparantly some computers have issues with network adapters.....
If you are receiving the Unknown Device in Blackberry Desktop Software, and are unable to get your Blackberry Playbook to show up, here are some troubleshooting steps to fix the issue.
Step 1 � Ensure that your system is running the most current Blackberry Desktop Software. To ensure that you have the most current version, download and install it from this address.
BlackBerry - Desktop Software - Canada
By downloading and installing the most current Desktop Software you are ensuring that the correct drivers are actually already installed on your system.
Step 2 � Reboot your computer. (This step may not be required, but just to be safe)
Step 3 � Launch the Blackberry Desktop Software. Plug the USB cable that came with your Playbook into a USB port on your PC. Ensure that the volume is turned on. Ensure that your Blackberry Playbook is charged and powered on. Connect your Playbook to the computer using the micro USB end of the cable you connected to your computer earlier. Listen to hear the USB connected sound on your computer, and ensure that your playbook shows �Connected to Computer� on its display.
Step 4 � Right-click on My Computer, and click on Properties. Click on the Hardware tab. Then click on Device Manager. Expand the Network Adapters list by clicking on the +. Ensure that you have a Network adapter called Research In Motion Network Device in the list. You can now close Device Manager.
Step 5 � Click on the Start menu and open the Control Panel. Double Click on Network Connections. Under the LAN or High-Speed Internet section, you should see a Local Area Connection beside the Research In Motion Network Device, right-click on this Local Area Connection and click on Properties. Click on the General Tab and put check marks beside Client for Microsoft Networks, File and Printer Sharing for Microsoft Networks and Internet Protocol (TCP/IP). Click on OK and close Network Connections. Blackberry Desktop Software should now recognize the Blackberry Playbook and you should receive a pop up showing that Blackberry Device Manager is initializing storage volume access. You can now use Desktop Software to synchronize your Playbook and media, and open the Playbook as a Mass Storage device under a Mapped Network Drive.