1. mndb369's Avatar
    Can I get recommendations on a car mount for the SE with the official Leather flip case still attached to the Passport? I had the Black Passport and used the iOttie XL and official leather flip (tan and black) and it just squeezed in. It is too tight now.

    Suggestions?

    Posted via CB10
    09-05-15 11:20 AM
  2. kthhrrsn's Avatar
    Try ProClips. They have the absolute sturdiest and best fitting cases I've seen. I had an original Passport and had a ProClip. Fit great. When I lost it and grabbed the AT&T variant, I had to reorder the holder since the AT&T version is bigger. It fits perfectly. I believe you can chose one that will fit a device with a case. They'll probably have the SE version or the AT&T version may work well.

    Posted via CB10
    09-05-15 11:45 AM
  3. TheoRadu's Avatar
    Try the iOttie magnetic mount.

    Posted via CB10
    09-05-15 03:36 PM
  4. tecal4's Avatar
    http://www.amazon.com/Bracketron-IPM-197-BL-PowerDock-Auxiliary-Power/dp/B002JM2BOK/ref=sr_1_3?s=wireless&ie=UTF8&qid=1441492395&sr=1-3&keywords=braketron


    Passport SE Car Mount?-20150811_225545.jpg
    Passport SE Car Mount?-20150811_225603.jpg
    Passport SE Car Mount?-20150811_225624.jpg
    Passport SE Car Mount?-20150811_225702.jpg

    Posted via CB10
    Last edited by tecal4; 09-05-15 at 05:36 PM.
    Chuco Rifa likes this.
    09-05-15 04:44 PM
  5. Chuco Rifa's Avatar
    Thanks! About to order that, now.
    09-05-15 07:37 PM
  6. mhw100's Avatar
    Proclip is fantastic for the OG I had but I don't think the a&t version holder will fit the SE. I think the grooves that the device slides in would be different.
    09-05-15 08:00 PM
  7. KcanK's Avatar
    Moon mood Universal CD Slot Smartphone Car Mount Holder.

    My car is a 2009 BMW 3 series.

    I had to modify it a little because the cd slot is not one uniform width. This involved removing the rubber on the two outer 'prongs'. Now it slots in nicely and integrates into the dash well.

    Posted via CB10
    10-24-15 09:49 AM
  8. SmileDahling's Avatar
    Proclip is fantastic for the OG I had but I don't think the a&t version holder will fit the SE. I think the grooves that the device slides in would be different.
    Can confirm this.

    Had an OG Passport with a Proclip. Now I have an SE and while I can jam it in there and it'll fit I don't like the idea of doing that on a regular basis.

    Posted via CB10
    11-04-15 12:20 AM
  9. illlya's Avatar
    Hi,
    Thank you for contacting us and for your interest in ProClip products.
    Currently there are no plans to make a holder for the Silver Passport. However, this may change depending on customer demand going forward.
    However we have found that our basic holder for the AT&T version has a marginal fit.
    That is item 511716 seen here:
    http://www.proclipusa.com/store/prod...el-511716.aspx
    *
    The silver edition fits in this holder, albeit slightly loose.
    We recommend using a small felt pad inserted into the holder grooves to firm up the fit.
    *
    This is the only holder that works at all with Passport Silver.
    *
    Please let me know if you have any questions.
    *
    Best Regards,
    *
    Gregg Pokey
    Customer Sales and Support
    *


    BlackBerry Passport Sliver Edition
    BBGeordie likes this.
    11-04-15 05:05 AM
  10. kjjb0204's Avatar
    Hi,
    Thank you for contacting us and for your interest in ProClip products.
    Currently there are no plans to make a holder for the Silver Passport. However, this may change depending on customer demand going forward.
    However we have found that our basic holder for the AT&T version has a marginal fit.
    That is item 511716 seen here:
    http://www.proclipusa.com/store/prod...el-511716.aspx
    *
    The silver edition fits in this holder, albeit slightly loose.
    We recommend using a small felt pad inserted into the holder grooves to firm up the fit.
    *
    This is the only holder that works at all with Passport Silver.
    *
    Please let me know if you have any questions.
    *
    Best Regards,
    *
    Gregg Pokey
    Customer Sales and Support
    *


    BlackBerry Passport Sliver Edition
    Did you get it? How does it fit? Been using proclip for 10 years and this is the first device for which there is no specific holder.

    Posted via the CrackBerry App for Android on my Silver Passport!
    11-04-15 08:38 AM
  11. illlya's Avatar
    I might get the Priv.

    BlackBerry Passport Sliver Edition
    11-04-15 10:55 AM

Similar Threads

  1. Shaky parts on Passport SE
    By Jayasheelan in forum Ask a Question
    Replies: 1
    Last Post: 11-05-15, 05:46 PM
  2. **MINT** BlackBerry Passport Unlocked Black
    By lace van gun in forum Buy, Sell, Trade - Sold / Archived
    Replies: 2
    Last Post: 11-05-15, 09:09 AM
  3. Why are my ringtones muted on incoming calls on my Passport?
    By CrackBerry Question in forum BlackBerry Passport
    Replies: 1
    Last Post: 11-04-15, 09:49 AM
  4. Replies: 1
    Last Post: 11-03-15, 11:21 PM
  5. Can't get my EE Passport unlocked
    By tabulus in forum BlackBerry Passport
    Replies: 7
    Last Post: 11-03-15, 05:37 PM
LINK TO POST COPIED TO CLIPBOARD