- Well, I upgraded to a priv now... and the vector works just fine with it.
Posted via the CrackBerry App for Android03-06-16 01:27 AMLike 0 - BlackBerry Passport SE, latest OS (installed according to the webpage):
General notifications: work
Calls: can be seen when someone calls. However can't pick them up nor cancel them using the watch.
Sms: work, message and number / name can be seen
Email: work partially, I can see the name of the sender and the email description, but not the email itself
BBM: does not work
No other hub services work.
The bluetooth connection stability seems worse than previous version of the app (no clue if it's the vector or the bridge app though).
Posted via CB1003-06-16 07:10 AMLike 0 - BlackBerry Passport SE, latest OS (installed according to the webpage):
General notifications: work
Calls: can be seen when someone calls. However can't pick them up nor cancel them using the watch.
Sms: work, message and number / name can be seen
Email: work partially, I can see the name of the sender and the email description, but not the email itself
BBM: does not work
No other hub services work.
The bluetooth connection stability seems worse than previous version of the app (no clue if it's the vector or the bridge app though).
Posted via CB10
Email: That's how Vector wanted it, I could have send the whole message but I was asked to only include sender and subject of the email.
BBM: Have you added BBM contacts in Bridge Settings page? You won't get any BBM message until you add BBM contacts in Settings page.
Other Hub accounts: You also need to enable them in Bridge Settings page.
Bluetooth connection: Bridge doesn't have anything to do with bluetooth, the concept of Bridge is it provides a way for Android apps to know what's happening in BlackBerry side of the phone, an Android doesn't have access to that part. So, when an email or SMS comes in, Bridge sends it to Vector app. Same goes with Calendar, BBM or other Hub warning, all those aren't available to Android apps so they are sent with Bridge to the Android app.
Posted via CB1003-06-16 08:12 AMLike 0 - In Bridge, make sure you click on "I Own A Vector" button on main screen.
Email: That's how Vector wanted it, I could have send the whole message but I was asked to only include sender and subject of the email.
BBM: Have you added BBM contacts in Bridge Settings page? You won't get any BBM message until you add BBM contacts in Settings page.
Other Hub accounts: You also need to enable them in Bridge Settings page.
Bluetooth connection: Bridge doesn't have anything to do with bluetooth, the concept of Bridge is it provides a way for Android apps to know what's happening in BlackBerry side of the phone, an Android doesn't have access to that part. So, when an email or SMS comes in, Bridge sends it to Vector app. Same goes with Calendar, BBM or other Hub warning, all those aren't available to Android apps so they are sent with Bridge to the Android app.
Posted via CB10
In contrary to the android functionality the calls cannot be accepted / rejected.
I have enabled all other accounts I use in the bridge app. Still when receiving message from Facebook they are not forwarded.
Can't say much about whatsapp, first when someone writes me back...
Thanks Rodger, keep it up
Edit: whatsapp works
Posted via CB10Last edited by Narhim; 03-06-16 at 04:09 PM.
03-06-16 10:02 AMLike 0 -
- Is the email really long?
- Was there an attachment to the email?
- Was it an email sent to a group of people?
- Was the screen opened or closed?
- On mobile data or wifi?
- How many bluetooth devices connected at the same time?
If you could find a way to reproduce, that would be awesome.
Posted via CB1003-07-16 12:29 PMLike 0 - Can you try to find a pattern when this happens, something like :
- Is the email really long?
- Was there an attachment to the email?
- Was it an email sent to a group of people?
- Was the screen opened or closed?
- On mobile data or wifi?
- How many bluetooth devices connected at the same time?
If you could find a way to reproduce, that would be awesome.
Posted via CB10
I am on mobile network all time.
Only the watch is connected.
Messages / mails sent onlyy to me.
Posted via CB1003-07-16 04:20 PMLike 0 -
I noticed that uninstalling any Android app would make my Pebble disconnect, that's an Android Runtime bug but as it automatically reconnects a few seconds later, it's not a big issue to me. I don't own a Vector myself so it's hard to test, but if you have any other info, please share it here and I'll make everything I can to try to fix whatever I can fix.
Posted via CB1003-07-16 07:32 PMLike 0 - Are you using WhatsApp BB10 version or Android version?
I noticed that uninstalling any Android app would make my Pebble disconnect, that's an Android Runtime bug but as it automatically reconnects a few seconds later, it's not a big issue to me. I don't own a Vector myself so it's hard to test, but if you have any other info, please share it here and I'll make everything I can to try to fix whatever I can fix.
Posted via CB10
Do you live in Switzerland?
Posted via CB1003-08-16 09:41 AMLike 0 - I have the BlackBerry version of whatsapp. My feeling tells me that something is making a mess when a mail or message gets forwarded to the watch resp. to the runtime feeding it to the watch (not sure how it works exactly). No clue if it's the runtime or the communication between bridge and vector and certainly have no clue where Bluetooth comes into the equation (android vector app uses the BlackBerry bluetooth to communicate with the watch. May the bridge to bridge droid interface cause it?)..
Do you live in Switzerland?
Posted via CB10
1) Device receive an email, which is sent to the Hub.
2) Bridge is automatically warned about the new email.
3) Bridge sends it to Bridge Droid through local network (similar to how internet works).
4) Bridge Droid uses an Intent to send it to Vector app. Intents are the official Android communication.
5) Vector uses bluetooth to send it to the watch.
Bridge and Bridge Droid doesn't interfere with bluetooth at all, it never tries to connect to bluetooth or tries to intercept bluetooth communication. In fact, I often have 3 bluetooth devices connected at the same time and don't have any bluetooth issue : Pebble, headset and BlackBerry Music Gateway.
Please continue to give me as much info as you have (when you have new info), as even if the issue seems to be related to bluetooth, it might also be related to Android Runtime.
I'm in Canada, but my real job is truck driver by night. I also have two young kids, which are awake during the day obviously. So my wake-up time might be completely messed up and hard to follow.
Posted via CB1003-08-16 10:25 AMLike 0 - An email goes a long road before appearing on your watch, let me try to explain in simple terms :
1) Device receive an email, which is sent to the Hub.
2) Bridge is automatically warned about the new email.
3) Bridge sends it to Bridge Droid through local network (similar to how internet works).
4) Bridge Droid uses an Intent to send it to Vector app. Intents are the official Android communication.
5) Vector uses bluetooth to send it to the watch.
Bridge and Bridge Droid doesn't interfere with bluetooth at all, it never tries to connect to bluetooth or tries to intercept bluetooth communication. In fact, I often have 3 bluetooth devices connected at the same time and don't have any bluetooth issue : Pebble, headset and BlackBerry Music Gateway.
Please continue to give me as much info as you have (when you have new info), as even if the issue seems to be related to bluetooth, it might also be related to Android Runtime.
I'm in Canada, but my real job is truck driver by night. I also have two young kids, which are awake during the day obviously. So my wake-up time might be completely messed up and hard to follow.
Posted via CB10
I would try another runtime, the passport is running very well with the new one... let's see after the update to 10.3.3
Posted via CB1003-09-16 06:26 AMLike 0 - Might be connected to this:
When I receive a message and look at the watch, it works aside the rare occasions when the signal gets lost for a millisecond and then kicks in again, happens mainly when several messages arrive in short time.
Edit: When I press the middle button to show a message it always happens as well (loosing bluetooth contact). Might be the vector app causing trouble?
Posted via CB10Last edited by Narhim; 03-10-16 at 07:23 AM.
03-10-16 05:35 AMLike 0 - Might be connected to this:
When I receive a message and look at the watch, it works aside the rare occasions when the signal gets lost for a millisecond and then kicks in again, happens mainly when several messages arrive in short time.
Edit: When I press the middle button to show a message it always happens as well (loosing bluetooth contact). Might be the vector app causing trouble?
Posted via CB10
http://appworld.blackberry.com/webst...ntent/39879918
Posted via CB1003-10-16 07:41 AMLike 0 - Interesting, I'll keep that in mind. Have you installed the Android Runtime update released a week or two ago? Might be worth a try if you haven't.
http://appworld.blackberry.com/webst...ntent/39879918
Posted via CB10
Posted via CB1003-10-16 08:19 AMLike 0 -
Did I read you correctly? You're considering giving up and getting a Priv? I've been following this thread closely hoping someone would finally get all the bugs worked out and then I was going to go ahead and buy a Passport to work with my Vector. I'll be patient, hopefully it will all get sorted out.03-10-16 10:19 AMLike 0 - Narhim,
Did I read you correctly? You're considering giving up and getting a Priv? I've been following this thread closely hoping someone would finally get all the bugs worked out and then I was going to go ahead and buy a Passport to work with my Vector. I'll be patient, hopefully it will all get sorted out.
I have three major issues with priv at the moment:
No granular permissions
Poor hub integration
Poor battery - most important thing for me (my passport SE allows me 24h of heavy use: music the whole day, calls, mails, bluetooth to my vector, BBM, whatsapp, scientific libraries, apps, data mining etc.)
Posted via CB1003-10-16 10:30 AMLike 0 - I've heard from others that the Vector will only receive calls with the Priv and won't receive any notifications through the hub. Vector support confirmed this for me.03-10-16 10:34 AMLike 0
-
nevertheless you can use vector app with the android account on priv, e.g. Gmail, email, facebook, whatsapp, BBM without using the hub, the same way people use normal android phones..?
Sorry for the off-topic
Posted via CB10Last edited by Narhim; 03-10-16 at 10:57 AM.
03-10-16 10:40 AMLike 0 - The hub on priv is just another app after all...
nevertheless you can use vector app with the android account on priv, e.g. Gmail, email, facebook, whatsapp, BBM without using the hub, the same way people use normal android phones..?
Sorry for the off-topic
Posted via CB1003-10-16 10:46 AMLike 0 - You may be able to bypass the hub, but that kind of defeats the whole purpose of having a Blackberry. Might as well jump ship and get an S7 like everyone else. Now that the Priv is on the largest American carrier and there will be a lot more of them, maybe Vector will do something about this.
Posted via CB1003-10-16 11:04 AMLike 0 - Have bought a Vector Luna today. Very fancy watch indeed. Using it with a BB Z30 phone.
Downloaded the apk file for VectorWatch app - version 1.1.5 or something;
Installed Bridge app from Amazon Appstore.
Until I installed the Bridge Droid I had no issues connecting the VectorWatch app with the watch. After installing Bridge, it seems the notifications work fine.
The problem is that the connection is lost every 15-20 minutes and I get a notification on the phone that the app has unfortunately stopped. I have to restart it, works fine for another period and crashes again. I will monitor this but it happened many times in 5 hours of use.
Anyway, thanks Roger and Vector for trying to help BB 10 OS users !03-10-16 11:47 AMLike 0 - Have bought a Vector Luna today. Very fancy watch indeed. Using it with a BB Z30 phone.
Downloaded the apk file for VectorWatch app - version 1.1.5 or something;
Installed Bridge app from Amazon Appstore.
Until I installed the Bridge Droid I had no issues connecting the VectorWatch app with the watch. After installing Bridge, it seems the notifications work fine.
The problem is that the connection is lost every 15-20 minutes and I get a notification on the phone that the app has unfortunately stopped. I have to restart it, works fine for another period and crashes again. I will monitor this but it happened many times in 5 hours of use.
Anyway, thanks Roger and Vector for trying to help BB 10 OS users !
By the way, may it be that the signal gets disconnected when a message or a mail is being pushed to the watch? Because that seems to be the thing with me.
Do you experience issues with connectivity when pressing the middle button on the vector watch to remove notification?
Edit: ok I was analysing the behaviour today. The connection to watch gets lost upon message (any kind that is being forwarded to the watch) arrival in the hub. It seems to be kind of random, sometimes it happens, sometimes it does not. After that either the connection is recreated again or lost until starting the app again. Then it remains until the next message comes, and the roulette begins anew. Pressing the middle button to visualise the message on the watch seems a roulette as well for me.
Hope it helps
Posted via CB10Last edited by Narhim; 03-10-16 at 01:18 PM.
03-10-16 12:43 PMLike 0 - Can you do one test :
- Go in Hub and find Bridge Droid notification
- Click Test Pebble button
This will send a test notification to your Vector. Does that makes the bluetooth connection disconnect ? What if you try it a few times?
Posted via CB1003-10-16 06:58 PMLike 0 - Tried it and indeed it causes a short disconnection from the watch but it reconnects again.
This is not a big issue, the bigger issue is that that the VectorWatch app is crashing. This causes permanent disconnection and it needs starting the Vector Watch again. So, my guess is that the problem resides with the VectorWatch app.
For instance, last night I left the phone to charge in Bedside mode and this morning they were still connected, the VectorWatch app did not crash.03-10-16 11:46 PMLike 0
- Forum
- BlackBerry 10 Phones & OS
- BlackBerry Passport
Blacberry Passport and vector watch
Similar Threads
-
Support for Leap in Torch Flashlight app
By radwon in forum BlackBerry LeapReplies: 13Last Post: 11-16-15, 10:03 AM -
BlackBerry Passport Red + Charging Dock
By Buddha Piece in forum Buy, Sell, Trade - Sold / ArchivedReplies: 13Last Post: 10-27-15, 08:43 AM -
Just an observation and some thoughts
By BBd00d in forum Armchair CEOReplies: 7Last Post: 10-22-15, 06:53 PM -
When is the Priv going to launch? And how much is it gonna cost? Are there any preorders available?
By Blackberry-Prince in forum BlackBerry PrivReplies: 13Last Post: 10-21-15, 02:54 PM -
how to show world clock as wallpaper on passport
By CrackBerry Question in forum Ask a QuestionReplies: 0Last Post: 10-19-15, 09:34 AM
LINK TO POST COPIED TO CLIPBOARD