[[email protected]]

Rephrased: can this build be installed on .714 Base for 9860? Quick reply pls. Thank you.

Sent from my B@stard BlackBerry 9800 using Tapatalk

[BoldAlways]

Rephrased: can this build be installed on .714 Base for 9860? Quick reply pls. Thank you.

Sent from my B@stard BlackBerry 9800 using Tapatalk

Those still running .649 or .714

Open platform alx with notepad.
Add this extra line anywhere the rest of the cods are listed.

net_rim_bb_phone_qchatptt_resources.cod

net_rim_bb_virtual_keyboard_layout480x640

If you do not do this, your phone won't load.

Follow these instructions on first post. It�s possible, yes.

[maxx71]

I use metterberry and it never shows 100 so even when full charged its at 99% then drops to 98% and so forth depending on what i'm doing. 5hrs later i'm at 63% on 3G with almost no use at all, it aint bad just that there is always that nagging feeling that it can do better. Will try plain .746 tonight and then use it as a base if things dont seem to improve then use its .sfi with another OS if its better. Sometimes I lose more than 10 percent just looking at whatsapp and if i just close it and don't exit it properly then my battery drain starts accelerating downwards. twitter and facebook are not as bad.

For me, meterberry always shows the correct %age........when fully charged it gives me 100% notification.
I feel you need an OS with Great power management.......would suggest you to look at 7b1 or 6b2 ( they both have great power management capabilities)

[maxx71]

it is just one hr after installation of BL return on 9860 with base .746 and 714 sfi (Large), BDR is slightly higher but let us wait for to settle it. I used basic 746 for a day, except battery temp, rest everything was fine but BL team has made us so restless and unsatisfied that every ombination, we would like to test.

Funnily, that's true..........with BL all of us have High Expectations and i dare say they meet them 99.99%.

[[email protected]]

Those still running .649 or .714

Open platform alx with notepad.
Add this extra line anywhere the rest of the cods are listed.

net_rim_bb_phone_qchatptt_resources.cod

net_rim_bb_virtual_keyboard_layout480x640

If you do not do this, your phone won't load.

Follow these instructions on first post. It�s possible, yes.

Thank you. And if this is done properly, the hybrid should work well?

Sent from my B@stard BlackBerry 9800 using Tapatalk

[maxx71]

Thank you. And if this is done properly, the hybrid should work well?

Sent from my B@stard BlackBerry 9800 using Tapatalk

Yes

[phatmaan]

Checking in , .746 Large (Rogers) + .714 Large Sfi - BL Returns 1.00
1. Awesome battery life , Moderate usage ( Inbound Email and Constant Whatsapp + Viber)
2. Not a big bluetooth user , besides transferring fotos to my laptop , thats about it
3. Note I am running in EDGE (Vodafone India) , In 2 weeks will be going to Malaysia ( 3G Celcom) , will let everyone know how it turns out.
4. I think os well settled.
5. No issues so far

Im not using any app like meterberry or tinyberry , this based on me looking at the batter bar , Amazingly after entire 12 hours of usage , still have 60% battery life left , which is phenomenal

[Sator]

Thank you. And if this is done properly, the hybrid should work well?

Sent from my B@stard BlackBerry 9800 using Tapatalk

Yes, use base .746 and .714 sfi for your 9860.

Sent from my BlackBerry 9900 using Tapatalk

[ifraser]

This is not the thread for the BL Ultimate Hybrids, This is the Newer BL Returns releases.

We have different developers working on the mixes.

Guys,why is this threat?What is the difference between this post and "BerryLicious Hybrid for most 7.1 devices?
I am still using .658 base with RCB2!
I was willing to try .714 with the RC7A...
Suggestions?Thanks in advance.

Sent from my BlackBerry 9900 using Tapatalk

[bmercer94]

Just stopping by with some reports:
First image is a log of what my battery's been doing, gaining % during idles

Second image is my shocking ADR so far today. it's only 1PM, but hey it's still good.

[ifraser]

We are still awating a new OS release then we can get a new mix developed asap,
BL Return v1.0.0 is going down well but v2 will be rocking as well.

[bimmerdriver]

So what's the verdict on the sfi? I just installed .746 large sfi (Rogers). After almost 24 hours, including idling overnight it's at 1.5% ADR with 20C battery temperature. Not quite what I was getting on .714 small sfi, but okay. I'm interested to hear from someone who started from .746 large sfi and then installed BL v1 over top. What difference did it make? Should I run this for a while and then install BL v2?

[SWAT-ron2k11]

Can Someone help me out please with the installation Process Please. Cause its the first time having to mess with the alx files. So far i ran and installed the BL.exe. Now what do next... wheres the platform alx and what to do with the keyboard cods :s after that i know how to shrink and load up.

Thanks again - Running 9900 BL Ultimate .714 Base

[Phly_kid]

For me, meterberry always shows the correct %age........when fully charged it gives me 100% notification.
I feel you need an OS with Great power management.......would suggest you to look at 7b1 or 6b2 ( they both have great power management capabilities)

Don't remember my experience with 6b2 but i'm running 7b1 at the moment with .714 base + sfi and yesterday it was awesome today not so awesome. I know it may still be settling down so i will give it a few more days. Maybe after a few battery pulls it will be ohk, on the other hand there is the 746 OS and v4 of the AT&T mix that is yet to be explored. so much to do so little time.

[SkaterGuy2k]

I have tried a couple of times now but I am not able to get loader to recognize my phone after I install the returns java. I have installed the other hybrids with no issues in the past. Please advise and I have Torch 9860 using base .746
Thanks in advance

[Legal Eagle]

I have tried a couple of times now but I am not able to get loader to recognize my phone after I install the returns java. I have installed the other hybrids with no issues in the past. Please advise and I have Torch 9860 using base .746
Thanks in advance

vendor.xml file ???

[SkaterGuy2k]

Used BBHtool to delete

[nykcmelo7]

How do you install the OS 6 one?

[audio_engr]

Sorry BL Team, gotta let this one go ...

7B1 works better for me,

in the end, each of our network plays an imp role & its jus' dat Voda India works better with 7B1

[bmercer94]

How do you install the OS 6 one?

Install a base, usually 6.0.0.723, point the installer at C:\Program files\common files\research in motion\loader files\osfolder\java then delete vendor.xml files, shrink it, and load.

more reports:

[adamschuetze]

What is "sfi"?

[bimmerdriver]

What is "sfi"?

The sfi is a piece of code that runs directly on the hardware. It contains the java virtual machine and provides the environment that the java code runs in and talks to the hardware through.

[nykcmelo7]

Install a base, usually 6.0.0.723, point the installer at C:\Program files\common files\research in motion\loader files\osfolder\java then delete vendor.xml files, shrink it, and load.

more reports:
http://i45.tinypic.com/2nq3x28.jpg

http://i46.tinypic.com/5up6xw.jpg

Thank you very much!

[bmercer94]

Thank you very much!

No problem, happy to help

Dear Zoc & BL Team: would you be able to develop an OS5 hybrid? i'll mail you a cookie, or paint you a picture, or write you a letter.

[bimmerdriver]

Dear Zoc & BL Team: would you be able to develop an OS5 hybrid? i'll mail you a cookie, or paint you a picture, or write you a letter.

Are you always this generous?