[bovid]

Yes...Once the operation completes. you'll just get a blinking red LED and a black screen. Just launch loader and you will be fine.


How noob'ish of me to not mention that, thanks for the heads up, @bovid

lol no problem, its all good gave me an opportunity to learn. i just installed 14b with 907 sfi on my 9790, anxious to see the results

[hammiedos]

lol no problem, its all good gave me an opportunity to learn. i just installed 14b with 907 sfi on my 9790, anxious to see the results

Can anyone send me a link for OS 907 for 9790?

[bovid]

Can anyone send me a link for OS 907 for 9790?

compliments of maxx71
https://swdownloads.blackberry.com/D...4C84A4150BF60F

[seagull]

Okay, sorry for the question (I've installed several of these BerryLicio.us Ultimate hybrids) but something isn't clicking for me today. I'm going to install .912 and I've got a 9900. Do I use the...

RC14B for .86x & .9xx SFI (except .862 SFI)

or

RC14B for non .86x & .9xx SFI

Thanks in advance. Having .9xx in both I guess I'm just not sure which to use. I appears to me that I could use either, I'm not following the non and & yes vs. no very well.

[bovid]

heres a stupid question, do soft resets from programs like meterbe or aos led, act like battery pulls?

[clie610]

Okay, sorry for the question (I've installed several of these BerryLicio.us Ultimate hybrids) but something isn't clicking for me today. I'm going to install .912 and I've got a 9900. Do I use the...

RC14B for .86x & .9xx SFI (except .862 SFI)

or

RC14B for non .86x & .9xx SFI

Thanks in advance. Having .9xx in both I guess I'm just not sure which to use. I appears to me that I could use either, I'm not following the non and & yes vs. no very well.

If you have 9900, you should use the RC14B for .86x & .9xx SFI (except .862 SFI)

heres a stupid question, do soft resets from programs like meterbe or aos led, act like battery pulls?

It is not the same. Sator mentioned something before about this but I forgot

[deezy87]

When I do a battery pull (only when I swap batteries) I'll let my Bold sit for like 5 minutes, or so before inserting the fresh battery. I like it like that, you get to control the amount of time the battery stays out before you begin the boot up. That's just me though.

[seagull]

[QUOTE=clie610;8277791]If you have 9900, you should use the RC14B for .86x & .9xx SFI (except .862 SFI)

THANKS!!!

[howards]

I'm using RC14B .861 Digicell base and the .912 sfi without any problems on AT&T. In fact, this has been the best signal lock and strength I can remember.

Any reason you chose to use 861 as your base and not 912 since you used the 912 sfi?

[john1972]

Thank you sir.

[Sator]

Hi Juga Bro,

waduh master turun tangan...
berarti saya salah membaca instruksi,
berarti hanya memasukkan file-file .cod didalam folder java rc14b ke dalam folder java aslinya begitu master ?
baiklah, akan saya coba master, saya tadi coba wipe pakai triple wipe malah led handheldnya berkedip kedip...
tapi sudah bisa menyala lagi sekarang.
terima kasih atas banyak info dan sarannya.

Ya, cuman di copy paste saja, Java aslinya jgn di delete. Triple memang kerjanya bgtu, led nyala berati cods dan SFI nya di wipe jg, nanti app.loader detect lwt ARM bkn lwt JVM, gak apa2 sih bro, aman kok, cuman sy pake sekali2 aja, biasa wipe dulu pake bbhtools trus triple wipe, rutin sy pake bbhtools u/ wipe device sy.

Sent from my BlackBerry 9900 using Tapatalk

[WindOfRage]

No battery saving mode in os .912 for bold 9900 installed with rc14???????

[deezy87]

I got battery saving mode, and I've also made an OTA for the latest BBDA as well, if yours isn't working.

Sent from my BlackBerry� Bold� 9900 smart phone - Powered by BerryLicio.us Ultimate 7.1 hybrid series on RC14B 9900/7.1.0.912 (B2508) - Using my thumbs

[WindOfRage]

hmm weird, i'm going to reinstall and see if it will help.

Thanks for your quick answer

[deezy87]

Yeah, wipe the phone, and just double check your procedure.

Hope everything works out for you!

Sent from my BlackBerry� Bold� 9900 smart phone - Powered by BerryLicio.us Ultimate 7.1 hybrid series on RC14B 9900/7.1.0.912 (B2508) - Using my thumbs

[WindOfRage]

I will do. Can you tell me what the cods are for the battery saving mode? mabye i first i can look for them before I install the os.

[deezy87]

Have no what the .cod's are used for thr battery saving mode. Sorry!

Sent from my BlackBerry� Bold� 9900 smart phone - Powered by BerryLicio.us Ultimate 7.1 hybrid series on RC14B 9900/7.1.0.912 (B2508) - Using my thumbs

[WindOfRage]

Well... just tried and this time it's there so thanks for the help you gave me.

[deezy87]

@WindOfRage glad I was able to help! Perhaps a bad load, thank goodness it got resolved.

Also don't forget the battery pulls at 6 hours apart, roughly 3-5 minutes per battery pull. Do this for the first 2 or 3 days and you'll notice things moving MUCH better than before.

Enjoy this build RC14B, Sator injected horse steroids into that beast! LMFAO [inside joke]

[Phly_kid]

Hi Sator, I have a few queries. I have noticed that with this latest build all is well however I have major memory leaks. I would notice 2.3mb but then that will gradually increase to highs of 83mb +. Which is strange coz the plain 861 OS by itself has almost no memory leaks. I have no issues with having memory leaks, it has never been a concern of mine however my main problem is this memory does not get released. Only when I force myself to do a battery pull. I'm running 861 base +714sfi + rc14b.
my second issue is the TCIP option in advanced settings is not present/missing. i hadn't noticed until i decided to try running apps with an apn to see if i can get whatsapp running without BIS only to find that the option is missing.

[cobracam]

A few days ago I installed the RC14B on a 861, 912 and SFI, but I believe that the radio does not have the same power SFI 746. I initially installed on the same RC14B the SFI 746 that had a power of field. Has anyone tried the two versions?
Think I'll all'SFI 746.

[josh74]

Can I use 7.1.0.912 for the 9360 on my 9370?

[Sator]

Can I use 7.1.0.912 for the 9360 on my 9370?

No, you can't use OS for 9360 since it's for GSM device and yours is a CDMA

Sent from my Z10 using Tapatalk 2

[Sator]

Hi Sator, I have a few queries. I have noticed that with this latest build all is well however I have major memory leaks. I would notice 2.3mb but then that will gradually increase to highs of 83mb +. Which is strange coz the plain 861 OS by itself has almost no memory leaks. I have no issues with having memory leaks, it has never been a concern of mine however my main problem is this memory does not get released. Only when I force myself to do a battery pull. I'm running 861 base +714sfi + rc14b.
my second issue is the TCIP option in advanced settings is not present/missing. i hadn't noticed until i decided to try running apps with an apn to see if i can get whatsapp running without BIS only to find that the option is missing.

I'm going to post RC14B2 for non. 86x & .9xx SFI (exept.862 SFi), more .912 cods added to fix TCP settings and memory leak. I've tested with .714 SFI and it's OK.

Sent from my Z10 using Tapatalk 2

[cobracam]

when?

I'm going to post RC14B2 for non. 86x & .9xx SFI (exept.862 SFi), more .912 cods added to fix TCP settings and memory leak. I've tested with .714 SFI and it's OK.

Sent from my Z10 using Tapatalk 2