my temperature on Bold 9900 is a shocking 78F, isn't that a bit too high? even though the phone doesn't feel warm
It was just on my side table the whole night, ADR 4%
my temperature on Bold 9900 is a shocking 78F, isn't that a bit too high? even though the phone doesn't feel warmIt was just on my side table the whole night, ADR 4%
That's nothing to worry about. I've seen temps close to 100 on my 9930. Normally it's at or slightly above room temperature. You can check the CPU history in Options -> Device -> Application Management. If nothing else, reset/battery pull to end anything that would be making your device work harder. Also, be sure to turn on Application Resource Monitor which will shut down anything that's draining your resources (and heating up the device).
That's nothing to worry about. I've seen temps close to 100 on my 9930. Normally it's at or slightly above room temperature. You can check the CPU history in Options -> Device -> Application Management. If nothing else, reset/battery pull to end anything that would be making your device work harder. Also, be sure to turn on Application Resource Monitor which will shut down anything that's draining your resources (and heating up the device).
The CPU history shows nothing worth increasing battery temperature is going on. Also the Application Resource Monitor is on, I did do the battery-pull but it's a high 89F now
using mix 794 base with RC10+794.sfi right now. give me good temp better than full base 794. memory leak still exist but not as hardcore as 794. good job BL team
The CPU history shows nothing worth increasing battery temperature is going on. Also the Application Resource Monitor is on, I did do the battery-pull but it's a high 89F now
I work in degrees C rather than F and have previosly remarked that the .794 .sfi is running around 6 degrees higher than .714 .sfi.
However, the device does not actually physically feel any hotter than it used to do so I feel that the .794 .sfi is actually giving a false temparature reading
Im still finding the 746 base with .714 sfi working as expected, with RC10. And im sure the hybrids will reach there optimal performance, perhaps close to that now. So its about finding a combination that suits!
To the fellow .746 base users: which bundle seems to work the best for BL? I'm using the 2102 bundle from Telecom and it seems to work fine. Is there a better one?
Day 2 - Long story short, best mix so far , Better than blr 2 and blr 3 , Its true it gets hot now and then but its erratic , and hardly noticeable , thankz guyz
My "reference" signal testing place for a poorish 3G signal just happens to be my favourite bar, so having installed the .794 .sfi with RC10 I decided to pay a visit last night, purely in the interests of science you understand. god, the sacrifices I make for you guys !!!
Pleased to report that .794 actually gave me better signal than my previous beloved .714 .sfi. Oh yes, the beer wasn't half bad either !!!
So although .794 shows a higher indicated temparature than .714 did the signal does seem to be better.
Will do some more testing tonight (beer and signal) just to make sure !!!
rc10 with 794 on my att bb 9900 is amazing...fast smooth....battery loss is minimal....quick question, when i look at version it show... 7 1 0 807...am i ok?
rc10 with 794 on my att bb 9900 is amazing...fast smooth....battery loss is minimal....quick question, when i look at version it show... 7 1 0 807...am i ok?
Hey guys I noticed something weird with some of my apps/app world. It showed some apps as installed when they weren't. And With some apps (Solitaire/Cut It!) when I install one, it uninstalls the other automaticall without asking...never had that issue before. Anyone have the slightest clue? I have over 200mb free so this isn't about with insufficient memory.
Hey guys I noticed something weird with some of my apps/app world. It showed some apps as installed when they weren't. And With some apps (Solitaire/Cut It!) when I install one, it uninstalls the other automaticall without asking...never had that issue before. Anyone have the slightest clue? I have over 200mb free so this isn't about with insufficient memory.
Open up appworld>myworld> press alt +type rst, it will reset your appworld memory.