[bmercer94]

I am having the same results around here...same ADR and I won't talk about the MDR... I don't know it make any difference but I didn't wipe my phone this time... Got lazy and just updated over the base OS... I'll give it one more day to see if it settles... If not I'll try a clean install...

Do you guys usually wipe your Berries before reloading? Just curious... :P

Sent from my BlackBerry 9105 Powered by B@stard: Aorist Hybrid

Personally i don't as Loader.exe wipes anyway.

[buttwaris]

I am having the same results around here...same ADR and I won't talk about the MDR... I don't know it make any difference but I didn't wipe my phone this time... Got lazy and just updated over the base OS... I'll give it one more day to see if it settles... If not I'll try a clean install...

Do you guys usually wipe your Berries before reloading? Just curious... :P

Sent from my BlackBerry 9105 Powered by B@stard: Aorist Hybrid

yes normally i do wipe my device everytime i reload a new os through BBSAK. wipe is receommended. you must start this wiping process also

[bmercer94]

yes normally i do wipe my device everytime i reload a new os through BBSAK. wipe is receommended. you must start this wiping process also

i used to always wipe first before installing, one day i didn't, and never had any ill effects, so i just stopped. Now i only wipe if i get apperror 200/602

Sent from my BlackBerry 9700 Powered by B@stard Aorist using Tapatalk

[buttwaris]

i used to always wipe first before installing, one day i didn't, and never had any ill effects, so i just stopped. Now i only wipe if i get apperror 200/602

Sent from my BlackBerry 9700 Powered by B@stard Aorist using Tapatalk

You should as it matters a lot. And every developer insists on a device wipe before reloading a os. It wipes everthing and reinstalls everything without any flaw.

[deathbearry]

so...i should wipe everything to get the better effect, eh? okay, i will try. back to basic

[buttwaris]

so...i should wipe everything to get the better effect, eh? okay, i will try. back to basic

yes recommended

[GilVaz]

You should as it matters a lot. And every developer insists on a device wipe before reloading a os. It wipes everthing and reinstalls everything without any flaw.

Personaly I usually wipe my phone... I've noticed the differences... I can tell you that almost everytime I just updated my phone I didn't notice a thing... And sometimes I got higher ADR and MDR...
Since I started doing it, now I can see something really changing..
Ok that the loader will wipe it and then restore. And maybe the backup and restore that I do with DM will get me at the same place... but I think a clean install makes the difference too.. Just got lazy this time and It was late..



Sent from my BlackBerry 9105 Powered by B@stard: Aorist Hybrid

[bmercer94]

You should as it matters a lot. And every developer insists on a device wipe before reloading a os. It wipes everthing and reinstalls everything without any flaw.

"every developer" is quite a generalization. wu-wei doesn't.

Sent from my BlackBerry 9700 Powered by B@stard Aorist

[GilVaz]

"every developer" is quite a generalization. wu-wei doesn't.

Eheh... In Wu we trust!!

But I have to say that personally I've noticed deferences... I can't compare with anyone else my result as no one has a device like mine.. I must be in the 0.1% of people with a 9105.... And 0.001% that uses this device and "hybridizes" it


Sent from my BlackBerry 9105 Powered by B@stard: Aorist Hybrid

[deathbearry]

different people, different methods

[lordnorms]

I am having the same results around here...same ADR and I won't talk about the MDR... I don't know it make any difference but I didn't wipe my phone this time... Got lazy and just updated over the base OS... I'll give it one more day to see if it settles... If not I'll try a clean install...

Do you guys usually wipe your Berries before reloading? Just curious... :P

Sent from my BlackBerry 9105 Powered by B@stard: Aorist Hybrid

[bmercer94]

reloaded to fix an error I was having. an error no one else was having. here's the results from my reload.


I apologize for the onslaught of photos that are about to come. The 9780 user is quite enthusiastic and requested i post them.

[GilVaz]

yes normally i do wipe my device everytime i reload a new os through BBSAK. wipe is receommended. you must start this wiping process also

I ALWAYS wipe my device before reloading a new hybrid.... this time just like i said....got lazy and just updated my device

I was just asking to see what you guys usually do....

[GilVaz]

reloaded to fix an error I was having. an error no one else was having. here's the results from my reload.


I apologize for the onslaught of photos that are about to come. The 9780 user is quite enthusiastic and requested i post them.

Damn that's really good results....let me just take a screen of mine to share.... but i never get even close to that ADR....
Unless i run it only in 2G and then yes i get something like 2.5%/hour..

[GilVaz]

After something like 17h of use... Most of the time with poor coverage and that is something I think is getting me higher ADR results...



Sent from my BlackBerry 9105 Powered by B@stard: Aorist Hybrid

[bmercer94]

After something like 17h of use... Most of the time with poor coverage and that is something I think is getting me higher ADR results...

http://img.tapatalk.com/d/12/12/24/se4yguve.jpg

Sent from my BlackBerry 9105 Powered by B@stard: Aorist Hybrid

My carrier doesn't have a 2G network, so any and all of my screens are 3G only. and low connection strength definitely contributes to ADR.

[deathbearry]

my Tiny Meter reading still show some weird reading. ADR is -8% while nevermind-it-but-i-still-tell the MDR is -25%. min is -1.1%%. ignore that for a while because i get something that quite shocking. after 16 hours gone the battery is power is at 58%. with 3G turned on, tweeting heavily and make some 1-2 min calls. is my 3G reception here influenced the reading of thr Tiny Meter?

[GilVaz]

Now I can see something going on around here... Better results after wiping with bbsak and reloading...

Anyone has noticed any difference wiping with bbsak or bb hybrid tools?

I think my bb hybrid tools is not working properly... I was trying to connect to my device to save my cod's but I keep losing it... Very unstable... :s

Here are some results... After 18h and 3 battery pulls... Emailing, browsing, calls, bbm, Facebook, Ubertwitter and obviously Tapatalk.....




Sent from my BlackBerry 9105 using Tapatalk

[bmercer94]

Now I can see something going on around here... Better results after wiping with bbsak and reloading...

Anyone has noticed any difference wiping with bbsak or bb hybrid tools?

I think my bb hybrid tools is not working properly... I was trying to connect to my device to save my cod's but I keep losing it... Very unstable... :s

Here are some results... After 18h and 3 battery pulls... Emailing, browsing, calls, bbm, and obviously Tapatalk.....

http://img.tapatalk.com/d/12/12/25/yje8yha2.jpg


Sent from my BlackBerry 9105 using Tapatalk

I orefer BBHT for system reads, but pretty much everything else I do is done through BBSAK

[GilVaz]

I orefer BBHT for system reads, but pretty much everything else I do is done through BBSAK

But something is going on with my BBHT.... :S
Not reading my device correctly and it keeps losing the connection with my device....

Sent from my BlackBerry 9105 powered by B@stard: Aorist Hybrid

[bmercer94]

But something is going on with my BBHT.... :S
Not reading my device correctly and it keeps losing the connection with my device....

Sent from my BlackBerry 9105 powered by B@stard: Aorist Hybrid

mine's the same. disconnecting, etc. but a system read only takes a moment.

Sent from my BlackBerry 9700 Powered by B@stard Aorist

[n8tiveg]

thanks wu looking good on my 9800

[GilVaz]

mine's the same. disconnecting, etc. but a system read only takes a moment.

Sent from my BlackBerry 9700 Powered by B@stard Aorist

Exactly, and if I don't connect and read the system files right away it won't read anything.. Weird....
This time I wiped and installed via bbsak and it seems to me that the wipe that it did was different... At least and it was something that I only remembered this time, I got the wipe error.. A thing that I don't recall getting with bbht... :s


Sent from my BlackBerry 9105 powered by B@stard: Aorist Hybrid

[GilVaz]

Oh, and once again, thanks Wu for another awesome build!

It wasn't your fault if was not getting the best results of your hybrid... I should have wiped my phone because my device seems to like it... Eheh...

By the way, Merry x-mas!! And to you too Ben!!

Sent from my BlackBerry 9105 powered by B@stard: Aorist Hybrid

[l0rd1]

oh wow really fast release, thanx Devs