-
-
-
Posted from my CrackBerry at wapforums.crackberry.comdimm0k likes this.10-17-11 09:12 AMLike 1 -
Howevern another solution is to use CascadedShortcuts function in ShortcutMe:
Let's assume you have a shortcut in SCM with shortcut keys TWF (toggle Wifi) and a shortcut for profile setting with shortcut keys PRO.
Now create a 3rd shortcut like this:
AppName: CascadedShortcuts
Parameters: TWF;PRO;
Shortcut Keys: TWP
Now set NFCLauncher to launch ShortcutMe with parameter TWP (the cascaded shortcut).
Tapping a nfc tag will now run those 2 shortcuts you wanted to run.10-17-11 09:44 AMLike 2 - Juggalo20 is on the right path to find a solution for this using macros.
Howevern another solution is to use CascadedShortcuts function in ShortcutMe:
Let's assume you have a shortcut in SCM with shortcut keys TWF (toggle Wifi) and a shortcut for profile setting with shortcut keys PRO.
Now create a 3rd shortcut like this:
AppName: CascadedShortcuts
Parameters: TWF;PRO;
Shortcut Keys: TWP
Now set NFCLauncher to launch ShortcutMe with parameter TWP (the cascaded shortcut).
Tapping a nfc tag will now run those 2 shortcuts you wanted to run.10-17-11 10:02 AMLike 0 - Thanks Vijik. Originally this was the way I was going to do it, however this would have created another shortcut in SCM whereas the suggestion Juggalo20 offered is done all within NFCLauncher. Do you know if I need the latest beta of NFCLauncher and SCM for Juggalo20's suggestion to work? I have access to the SCM betas, but not NFCLauncher.
I downgraded my SCM to 5.9.2.0 and it's still all good on my end :/ can't for the life of me figure out why not for you.10-17-11 10:09 AMLike 0 - Ok, so I uncovered a two things here... Still trying to get Juggalo20's suggestion to work I removed the NFC tag to start from scratch and this time when I tapped my device to the sticker I get a message "No macro found in 6". Any clue what this means?
Also with version 1.2.0.1 when you first go into NFCLauncher you see above the "Edit Selected Card" a "Launches" section that tells you the details of the tag. For me it's "ShortcutMe_Touch,TW" telling me that it's going to launch the TW shortcut from SCM. If I go to view any other tag the details don't show properly and the same goes for the first tag if I move back to it. Instead it shows up as "ShortcutMe_Touch" leaving out the ",TW".10-17-11 11:29 AMLike 0 - Ok, so I uncovered a two things here... Still trying to get Juggalo20's suggestion to work I removed the NFC tag to start from scratch and this time when I tapped my device to the sticker I get a message "No macro found in 6". Any clue what this means?
Also with version 1.2.0.1 when you first go into NFCLauncher you see above the "Edit Selected Card" a "Launches" section that tells you the details of the tag. For me it's "ShortcutMe_Touch,TW" telling me that it's going to launch the TW shortcut from SCM. If I go to view any other tag the details don't show properly and the same goes for the first tag if I move back to it. Instead it shows up as "ShortcutMe_Touch" leaving out the ",TW".
Posted from my CrackBerry at wapforums.crackberry.comdimm0k likes this.10-17-11 12:13 PMLike 1 - Ok, so here's another interesting tidbit... I have a shortcut in SCM as follows:
App Name: Options
Shortcut Keys: AAM
Macros:
NavMoveDown4;
ENTERKey;
NavMoveDown10;
ENTERKey;
Basically launches the 'Application Management' in Options. If I then do the following in NFCLauncher:
Launch: ShortcutMe_Touch
Parameter: ^NUL
PostMacros: ImportMacroAAM
and then tap the sticker, it looks like it never launches Options and it misses the "NavMoveDown4;" because whatever the cursor is on gets activated with the EnterKey; and then the NavMoveDown10; followed by ENTERKey;. I then get a message saying "Error recognizing macro: M"10-17-11 01:00 PMLike 0 - Ok, so here's another interesting tidbit... I have a shortcut in SCM as follows:
App Name: Options
Shortcut Keys: AAM
Macros:
NavMoveDown4;
ENTERKey;
NavMoveDown10;
ENTERKey;
Basically launches the 'Application Management' in Options. If I then do the following in NFCLauncher:
Launch: ShortcutMe_Touch
Parameter: ^NUL
PostMacros: ImportMacroAAM
and then tap the sticker, it looks like it never launches Options and it misses the "NavMoveDown4;" because whatever the cursor is on gets activated with the EnterKey; and then the NavMoveDown10; followed by ENTERKey;. I then get a message saying "Error recognizing macro: M"
App Name: Options
Shortcut Keys: AAM
Macros:
While0 !IsAppForeground Options;
Do0;
Delay1;
EndWhile0;
NavMoveDown4;
ENTERKey;
Delay20;
NavMoveDown10;
ENTERKey;Last edited by Juggalo20; 10-17-11 at 07:57 PM.
dimm0k likes this.10-17-11 07:55 PMLike 1 - It's best practice tp use some delays in conjunction with a while loop when launching things. Makes sure the macro does not click anything until the app is open. and adding a few small delays after NavClicks is usually good also, like....
App Name: Options
Shortcut Keys: AAM
Macros:
While0 !IsAppForeground Options;
Do0;
Delay1;
EndWhile0;
NavMoveDown4;
ENTERKey;
Delay20;
NavMoveDown10;
ENTERKey;
Your RPV's "App Name" is defined as a macro in SCM, while mine was defined with Profile_Selector. Is it correct that when referring to yours, it's referred to as a macro and mine as a shortcut?
Also you inserted a Delay20 after the NavClick in my AAM "macro?". Is 20 just enough of a delay to not cause a noticeable delay while still being enough to handle cases like this or is it a very generous one?10-17-11 11:21 PMLike 0 - Don't have the specific tag on me to test, but the Delays and the While loop does make sense! I'll check this out as soon as I get into work tomorrow. I also looked over your posts earlier and noticed that your example of the RPV shortcut was actually a macro, while mine was simply using Profile_Selector as the "App Name". Most likely the cause of why my Pre/Post in NFCLauncher were not working properly with "ImportMacro...". I guess I was getting things a little confused with SCM and NFCLauncher.
Your RPV's "App Name" is defined as a macro in SCM, while mine was defined with Profile_Selector. Is it correct that when referring to yours, it's referred to as a macro and mine as a shortcut?
Also you inserted a Delay20 after the NavClick in my AAM "macro?". Is 20 just enough of a delay to not cause a noticeable delay while still being enough to handle cases like this or is it a very generous one?
Posted from my CrackBerry at wapforums.crackberry.com10-17-11 11:27 PMLike 0 -
-
Launch Radio_Toggle;
No need to be! I think I was just confused in the terms used for shortcuts and macros thinking they were interchangeable rather than being mutually exclusive.10-18-11 01:24 PMLike 0 - Nope, that while loop I posted is really just for launching apps. Like Options, Messages, net_rim_bb_clock, etc.
Functions like Radio_Toggle, BlueTooth_Toggle, Radio_Toggle2, BedsideMode_Toggle all take care of themselves
Posted from my CrackBerry at wapforums.crackberry.com10-18-11 01:37 PMLike 0 - Nope, that while loop I posted is really just for launching apps. Like Options, Messages, net_rim_bb_clock, etc.
Functions like Radio_Toggle, BlueTooth_Toggle, Radio_Toggle2, BedsideMode_Toggle all take care of themselves
Posted from my CrackBerry at wapforums.crackberry.com
Posted from my CrackBerry at wapforums.crackberry.com10-18-11 03:30 PMLike 0 - I bought 10 mifare cards, amazing setup using nfc launcher and shortcut me. Already got one
For bedside mode, wireless on/off as I walk in. And bluetooth on/off in the car.
I need to get some sticky tags though since I have the full size cards.
Posted from my CrackBerry at wapforums.crackberry.comTomCanuck likes this.10-19-11 02:44 AMLike 1 - I bought 10 mifare cards, amazing setup using nfc launcher and shortcut me. Already got one
For bedside mode, wireless on/off as I walk in. And bluetooth on/off in the car.
I need to get some sticky tags though since I have the full size cards.
Posted from my CrackBerry at wapforums.crackberry.com
If you don't mind me asking, where'd you get your tags from? Buynfctags.com found this thread and have sinced changed their shipping method to Canada so I can't order from there anymore.10-19-11 02:52 AMLike 0 - Nice ;D 10's enough for you? :P I got 30 and still came up short, too many ShortcutMe macros haha.
If you don't mind me asking, where'd you get your tags from? Buynfctags.com found this thread and have sinced changed their shipping method to Canada so I can't order from there anymore.10-20-11 11:10 AMLike 0
- Forum
- BlackBerry OS Phone Forums
- BlackBerry OS Apps
What can NFC do? RIM, NFCLauncher
LINK TO POST COPIED TO CLIPBOARD