New App: BuzzOff block unwanted callers & don't allow callers to leave vmail released
-
CallsBlocker Download - Smartphone SoftwareLast edited by AlwaysLostSometimes; 07-25-09 at 09:59 AM.
07-25-09 09:54 AMLike 0 - Smiley88Developer - ToySoft
make sure you set the permissions to all ALLOW and put in the phone number exactly as when blocking.
if you still have problems then goto buzzoff prefs and select to match the last 7 or 10 digits07-25-09 09:55 AMLike 0 - I'm having a few problems with this app. I have a filter set for a number and it's set to pick and hangup. First altho I don't have my current profile to vib on phone calls it vibrates once anyway even tho Vibrate When Blocked is off. It also turns the red led alert on altho I don't have that on either and I can only stop it with the app LEDReset. Also when I get a call you see it on the screen then it says disconnected, it would be nice to have it totally "stealth" and not show anything at all. I would definately buy if those issues were fixed especially the first two. I did reboot after the install. Curve 8330.
forkup
edit: I've set my permissions to allow and disabled compatibility mode, still not working.07-26-09 12:34 PMLike 0 - I've already set the preferences to match the last 10 digits, then 7, then 4. What does that mean enter the phone number exactly as it is? Exactly as it is what? I added the number from my call log. I've entered the blocked number starting with a 1, without the 1, with dashes, without dashes. I've tried my gf's cell phone and today I tried my office number. Neither were blocked. What am I doing wrong? Please advise.07-27-09 09:35 AMLike 0
- Smiley88Developer - ToySofthere is the latest beta
ota www.toysoft.ca/beta/BuzzOff.jad
1 reset permissions to all ALLOW in the Options app after install
2 fixed the problem when you have block 1800 numbers checked in the prefs
3 added send debug msg. If you are having problem try blocking a call and then run BuzzOff and then select 'send debug msg' from the menu. this will email the current debug report to us07-28-09 01:38 AMLike 0 - Smiley88Developer - ToySoftif anyone still having problem please get v1.0.3 here
ota www.toysoft.ca/beta/BuzzOff.jad
this new beta fixes a couple of problems.
make sure you reset the permissions to all ALLOW in the Options app for BuzzOff and if you have a storm make sure to disable compatibility mode.07-28-09 10:02 AMLike 0 - I have just tried this version and it appears to work EXCEPT that blocked calls are being routed to my voicemail.
All permissioons are set to Allow.
I have tried both Pickup & Hangup and Block Call. Neither work.
How do I stop it from going to VM?
if anyone still having problem please get v1.0.3 here
ota www.toysoft.ca/beta/BuzzOff.jad
this new beta fixes a couple of problems.
make sure you reset the permissions to all ALLOW in the Options app for BuzzOff and if you have a storm make sure to disable compatibility mode.07-29-09 10:32 AMLike 0 - Smiley88Developer - ToySoftHere is the latest beta 1.0.4
Changes
--------
- added new checkbox 'Carrier use +1' some carriers only use 10 digits and do not use the +1 for long distance. this checkbox should only be used to block 1800s
- BuzzOff can block calls when the BB has keyboard or password locked. This has been tested on the Storm with v121 and on the curve 8900
if you have any problems pls let me know.
OTA www.toysoft.ca/beta/BuzzOff.jad
reset permissions to all ALLOW in the Options app after install.07-30-09 06:10 PMLike 0 - I installed this version but still have he same issue reported earlier in this thread.
All blocked calls go to VM. It's blocking every caller fine, but I can't stop them from leaving voicemail with Pickup @ Hanup. Any idea why? I have an 8900 but I'm running 5.0.0.100.
Here is the latest beta 1.0.4
Changes
--------
- added new checkbox 'Carrier use +1' some carriers only use 10 digits and do not use the +1 for long distance. this checkbox should only be used to block 1800s
- BuzzOff can block calls when the BB has keyboard or password locked. This has been tested on the Storm with v121 and on the curve 8900
if you have any problems pls let me know.
OTA www.toysoft.ca/beta/BuzzOff.jad
reset permissions to all ALLOW in the Options app after install.07-31-09 04:30 PMLike 0 - Smiley88Developer - ToySofthere is v1.0.8 beta
changes
--------
- added import and export filters to the sd card.
select from the menu. this is useful for backup and when you upgrade OS
- fixed the LED light. when a call is blocked the LED is turned off
- changed the text in the prefs for the NoCallerID to "Unknown and Private". some people was wondering how to block unknown and private
ota www.toysoft.ca/beta/BuzzOff.jad
reset permissions to all ALLOW after install.
pls let me know if you have any problems.08-10-09 01:16 PMLike 0 - here is v1.0.8 beta
changes
--------
- added import and export filters to the sd card.
select from the menu. this is useful for backup and when you upgrade OS
- fixed the LED light. when a call is blocked the LED is turned off
- changed the text in the prefs for the NoCallerID to "Unknown and Private". some people was wondering how to block unknown and private
ota www.toysoft.ca/beta/BuzzOff.jad
reset permissions to all ALLOW after install.
pls let me know if you have any problems.08-10-09 01:23 PMLike 0 - When my phone is in standby mode I get a partial ring before BuzzOff kicks in. I assume that is normal?
Oh another cool thing is if you have youmail you can block that number straight to voicemail than use the ditch VM response to make it look like your phone number is disconnected.Last edited by Velocitytrap; 08-12-09 at 09:54 AM.
08-12-09 08:26 AMLike 0
- Forum
- BlackBerry OS Phone Forums
- BlackBerry OS Apps
New App: BuzzOff block unwanted callers & don't allow callers to leave vmail released
LINK TO POST COPIED TO CLIPBOARD