1. TI_Master's Avatar
    Found an autoloader for the Motion for January 2019, all disclaimers apply (i.e. use at own risk and be sure you know what you're doing Crackberry, me, and everyone else aren't responsible if this turns your phone into a lovely paperweight. This did work great for my NA model though. Not sure if it works on models other than -2.

    https://mega.nz/#!bSB3iIRB!VvnCIWAsL...jl86ruFBofnabc
    01-25-19 11:21 AM
  2. DLewis13's Avatar
    Found an autoloader for the Motion for January 2019, all disclaimers apply (i.e. use at own risk and be sure you know what you're doing Crackberry, me, and everyone else aren't responsible if this turns your phone into a lovely paperweight. This did work great for my NA model though. Not sure if it works on models other than -2.

    https://mega.nz/#!bSB3iIRB!VvnCIWAsL...jl86ruFBofnabc
    What is your PRD? I have Motion BBD100-2 PRD-63739-009 which is NA model along with Motion BBD100-2 PRD-63739-010
    Thanks.
    01-25-19 12:01 PM
  3. TI_Master's Avatar
    What is your PRD? I have Motion BBD100-2 PRD-63739-009 which is NA model along with Motion BBD100-2 PRD-63739-010
    Thanks.
    I have a PRD-63739-009 and a PRD-63739-017 that I tested this with. tclota suggests it is on servers for the -17 right now, the -9 and -10 ones usually have to get PTCRB certification for a build before it hits servers. The -17 is LATAM markets so can get it sooner. But all three should be fine with it. No idea about other variants yet. There is a chance (but no guarantees until tclota shows what build is meant for them) it might work for BBD100-1 but doubt it will be happy on BBD100-6 since those are getting a different January build.
    Last edited by TI_Master; 01-25-19 at 12:31 PM.
    01-25-19 12:07 PM
  4. ashish_BB's Avatar
    I have a PRD-63739-009 and a PRD-63739-017 that I tested this with. tclota suggests it is on servers for the -17 right now, the -9 and -10 ones usually have to get PTCRB certification for a build before it hits servers. The -17 is LATAM markets so can get it sooner. But all three should be fine with it. No idea about other variants yet. There is a chance (but no guarantees until tclota shows what build is meant for them) it might work for BBD100-1 but doubt it will be happy on BBD100-6 since those are getting a different January build.
    Yes this is different. BBD 100-6 got 110.5 MB. This one is 2.38 GB.
    Attached Thumbnails January update ABP302-251997.jpg  
    01-25-19 01:09 PM
  5. dguy313's Avatar
    I have a PRD-63739-009 and a PRD-63739-017 that I tested this with. tclota suggests it is on servers for the -17 right now, the -9 and -10 ones usually have to get PTCRB certification for a build before it hits servers. The -17 is LATAM markets so can get it sooner. But all three should be fine with it. No idea about other variants yet. There is a chance (but no guarantees until tclota shows what build is meant for them) it might work for BBD100-1 but doubt it will be happy on BBD100-6 since those are getting a different January build.
    what's the procedure for updating without losing info? My wife's phone is a Motion BBD100-2 PRD-63739-009. I initially installed an autoloader using the flashall.bat and it stated that all information would be wiped. it was a new phone with no info on it so it didn't matter. now i want to install the autoloader but not lose info. do i use the update.bat within the package install of flashall.bat?
    01-25-19 06:22 PM
  6. thekidshop's Avatar
    I'm still on Oct patch WTF is going on , and this is an unlocked motion
    01-25-19 07:54 PM
  7. Elky64's Avatar
    I'm still on Oct patch WTF is going on , and this is an unlocked motion
    I'd like to know what is going on too! Our BBD100-2 (PRD-63739-009) was doing very good for the first 7-8 months when launched with monthly patches arriving within the month they were issued, now it's turning into a "by guess and by golly" affair as to when the next one will arrive. PTCRB certification has existed since day one and can't believe the carrier (in my case) has changed their tune deciding "we're now going to be difficult". So IMHO the problem is plain and simply resonating from the source (BBM0/TCL).
    01-25-19 11:18 PM
  8. conite's Avatar
    I'm still on Oct patch WTF is going on , and this is an unlocked motion
    All Motions are unlocked - as are all KEY²s and KEY² LEs.
    01-25-19 11:21 PM
  9. TI_Master's Avatar
    what's the procedure for updating without losing info? My wife's phone is a Motion BBD100-2 PRD-63739-009. I initially installed an autoloader using the flashall.bat and it stated that all information would be wiped. it was a new phone with no info on it so it didn't matter. now i want to install the autoloader but not lose info. do i use the update.bat within the package install of flashall.bat?
    Yes, update doesn't wipe. But there is always a risk using an autoloader
    01-26-19 12:53 AM

Similar Threads

  1. keyone wont boot up after update
    By Jason Heng in forum BlackBerry KEYone
    Replies: 15
    Last Post: 02-13-19, 02:24 AM
  2. Update - BBF100-4 - ABO927
    By Frank Lucas1 in forum BlackBerry KEY2
    Replies: 15
    Last Post: 02-12-19, 12:59 AM
  3. Replies: 89
    Last Post: 02-10-19, 08:00 AM
  4. How can I "downgrade" ABO927 update
    By revenga3189 in forum BlackBerry KEY2
    Replies: 3
    Last Post: 01-26-19, 06:54 PM
  5. January 2019 security patch for Verizon KEYone
    By Nate650 in forum BlackBerry KEYone
    Replies: 9
    Last Post: 01-25-19, 12:54 PM
LINK TO POST COPIED TO CLIPBOARD