Sign up now for Disney+
02-17-19 12:24 PM
40 12
tools
  1. geraldryan's Avatar
    Collected my Black keyone 64GB from CPW this evening. As I mentioned earlier it was £349 and needless to say it's cracker of a phone. Now all I need to know what do you guys consider is the best screen protector to use and I want to buy a good flip case for this before I put it near any pockets. Blackberry have one costing about £44 anybody seen this slightly cheaper??
    07-09-18 04:10 PM
  2. FF22's Avatar
    Collected my Black keyone 64GB from CPW this evening. As I mentioned earlier it was £349 and needless to say it's cracker of a phone. Now all I need to know what do you guys consider is the best screen protector to use and I want to buy a good flip case for this before I put it near any pockets. Blackberry have one costing about £44 anybody seen this slightly cheaper??
    I've got the Stilgut Flip case with clip. Not sure if they still offer it.
    07-09-18 07:07 PM
  3. prplhze2000's Avatar
    black
    07-12-18 11:08 PM
  4. Lionel Passport's Avatar
    I have finally pulled the trigger and get the BlackBerry Keyone Black Edition. It is a great phone. No regrets buying it.
    02-05-19 11:43 AM
  5. Lionel Passport's Avatar
    I have mine in a Stilgut flip case but still keep it in a microfiber eye glass "sock". This helps keep the lens clean and lint free.
    I am looking for a good case with which to protect my phone. Can you send me the picture of the sock you are using? I am looking to buy one.
    02-05-19 11:47 AM
  6. RLeeSimon's Avatar
    If it's from Amazon, you'll need to buy it and then do the MMI test to find out the build date (I'm 99% sure they only have newer units without the issue).

    If it's from a private seller, ask him/her to do the test and tell you the date etc..


    You can find the assembly date for the unit in the MMI test / Traceability menu

    1. Dial *#2886#
    2. Press the MANU red button
    3. Touch the "Traceability" menu
    4. Hit PASS

    You should get something like this, where the bottom line is a date of assembly:

    20170529
    YYYYMMDD

    5. Hit PASS again
    6. Scroll to the bottom and hit Exit
    My replaced screen pop KEYᵒⁿᵉ has ******** in place of assembly date... if no date is there *s only you might assume it's a refurb...
    Last edited by RLeeSimon; 02-05-19 at 02:18 PM.
    02-05-19 11:54 AM
  7. FF22's Avatar
    I am looking for a good case with which to protect my phone. Can you send me the picture of the sock you are using? I am looking to buy one.
    It is just a micro-fiber eyeglass bag. Found at any optical store probably.
    02-05-19 12:55 PM
  8. Lionel Passport's Avatar
    OK. I will look for one.
    02-05-19 01:14 PM
  9. Lionel Passport's Avatar
    BTW how can I tell whether my phone is a refurb? Does build date help here?
    02-05-19 01:17 PM
  10. Praganad's Avatar
    If it's from Amazon, you'll need to buy it and then do the MMI test to find out the build date (I'm 99% sure they only have newer units without the issue).

    If it's from a private seller, ask him/her to do the test and tell you the date etc..


    You can find the assembly date for the unit in the MMI test / Traceability menu

    1. Dial *#2886#
    2. Press the MANU red button
    3. Touch the "Traceability" menu
    4. Hit PASS

    You should get something like this, where the bottom line is a date of assembly:

    20170529
    YYYYMMDD

    5. Hit PASS again
    6. Scroll to the bottom and hit Exit
    I just tried this but I didn't get a date at the bottom, just xxxxxxx. Perhaps I did something wrong but in any case just to throw it out there, my keyone was bought from amazon, it is the silver edition and honestly I've dropped it a few times already with and without a case and I've had no issues with the screen, performance, or cosmetics. Awesome and still a "worthy" device.
    02-05-19 03:58 PM
  11. wfm69685's Avatar
    My replaced screen pop KEYᵒⁿᵉ has ******** in place of assembly date... if no date is there *s only you might assume it's a refurb...
    I got a replacement Keyone black after the first unit had an error. The Build Date says *********, so i think i may have a refurbished model.
    02-05-19 04:04 PM
  12. gpompeus's Avatar
    got a silver on the first day.... the screen popped out after a month... replaced it.

    then got a Black KeyOne a year later and been happy since then... the screen is glued to death!! Lol
    02-05-19 08:26 PM
  13. Lionel Passport's Avatar
    I also got a Keyone black edition. It is working great. My only gripe is that the Wi-Fi connection does not work. whenever I am trying to connect, it says "wrong password" even though the password is correct.
    02-06-19 01:39 AM
  14. Lionel Passport's Avatar
    I also got a Keyone black edition. It is working great. My only gripe is that the Wi-Fi connection does not work. whenever I am trying to connect, it says "wrong password" even though the password is correct.
    With Oreo Upgrade, this issue has been solved: the Wi-Fi connection is great now.
    02-15-19 02:49 PM
  15. Lionel Passport's Avatar
    Why is the Fingerprint scanner taking so long to recognize my fingerprints after the upgrade to Oreo? And vibrate too much?
    02-17-19 12:24 PM
40 12

Similar Threads

  1. Silver Edition Dual Sim
    By Moon_Man in forum BlackBerry KEY2
    Replies: 12
    Last Post: 08-19-18, 03:12 PM
  2. Does the KEY2 support rSAP?
    By Polly Vermeet in forum BlackBerry KEY2
    Replies: 3
    Last Post: 07-18-18, 02:48 AM
  3. How do I get Google Play Services on my Passport?
    By F V in forum BlackBerry Passport
    Replies: 2
    Last Post: 07-07-18, 04:43 PM
  4. I'm having a hard time deciding between both newer BlackBerry devices
    By bmhillegass87 in forum BlackBerry Mobile Support
    Replies: 5
    Last Post: 07-06-18, 01:16 PM
  5. Anyone using a Euorpean Model 001 in the US on ATT?
    By clerk in forum BlackBerry KEY2
    Replies: 6
    Last Post: 07-05-18, 07:10 PM
LINK TO POST COPIED TO CLIPBOARD