1. NikOnBB's Avatar
    Hello,

    I decided to open a new thread because things would get to messy, discussing them in the two seperate ABD174 & ABD796 threads.

    It's all about getting oreo two work on my KeyOne.

    At first, information about my device etc:
    KeyOne BE BBB100-2 PRD 63117-036 (I am using the device in Germany)
    I used the autoloaders on my 2011 MacBook Pro, which runs the latest macOS.

    Here's the story:

    Yesterday, I decided to run the ABD174 autoloader. Since ABD174 has been released to BBB100-2 PRD-63117-02, things seemed like ABD174 will be the ,,european" version of Oreo.
    I did not want to wipe my device and conite helped me to remove the lines from the flashall.sh file, which would normally wipe my device (see ABD174 thread).
    The installation went fine and without any wipe. The problem was, that I had no signal after installing oreo.

    Today, I decided to wipe my device and give it a clean install of ABD174. I reloaded the autoloader to make sure not to use a corrupt autoloader since I removed some lines from it yesterday. After running the autoloader, I am now stuck in a bootloop (android slogan in silver, fading). Looking at the last few lines in terminal, it says, that oem.img can't be loaded (see attached picture).

    Lastly, I tried to install ABD796, but the terminal says, that it does not detect any BB device, even though my device is connected in fastboot.

    Does anyone know, how to get my BB back to life?
    Thanks in advance!
    Attached Thumbnails Various problems with ADB174 & ABD796 autoloaders-bildschirmfoto-2018-08-18-um-13.36.08.png  
    08-18-18 07:00 AM
  2. conite's Avatar
    Replace the following in the sh file:

    oem_common.img instead of oem.img

    NON-HLOS-global.bin instead of NON-HLOS.bin

    This is why the radio didn't work.
    NikOnBB and bibbula like this.
    08-18-18 07:44 AM
  3. danp2000's Avatar
    Replace the following in the sh file:

    oem_common.img instead of oem.img

    NON-HLOS-global.bin instead of NON-HLOS.bin

    This is why the radio didn't work.
    Conite to the rescue.
    08-18-18 07:56 AM
  4. NikOnBB's Avatar
    Replace the following in the sh file:

    oem_common.img instead of oem.img

    NON-HLOS-global.bin instead of NON-HLOS.bin

    This is why the radio didn't work.
    Great! It's all working again.
    bibbula likes this.
    08-18-18 08:54 AM
  5. FuzzyManas's Avatar
    what about bat file? used it and had same problems – no signal.
    I have PRD-63117-011 BBB100-2
    08-18-18 08:57 AM
  6. conite's Avatar
    what about bat file? used it and had same problems – no signal.
    I have PRD-63117-011 BBB100-2
    That I don't understand. The windows batch files are 100% properly coded.

    Try downloading the autoloader again and running it again.
    08-18-18 09:10 AM
  7. FuzzyManas's Avatar
    That I don't understand. The windows batch files are 100% properly coded.

    Try downloading the autoloader again and running it again.
    And just to be sure can I replace those lines also? Or I should use NON-HLOS-emea variant?
    08-18-18 09:15 AM
  8. conite's Avatar
    And just to be sure can I replace those lines also? Or I should use NON-HLOS-emea variant?
    You don't need to touch the bat files. It's automatic.
    08-18-18 09:17 AM
  9. cristian_criste's Avatar
    @NickOnBB
    Your signal problem has been solved too?
    08-18-18 09:23 AM
  10. FuzzyManas's Avatar
    You don't need to touch the bat files. It's automatic.
    Thank you. It now works. Just re-extracted files and ran it again. Works. Miracle.
    08-18-18 09:34 AM
  11. NikOnBB's Avatar
    @NickOnBB
    Your signal problem has been solved too?
    Yes, i am happy.
    08-18-18 10:41 AM
  12. gjh1978's Avatar
    Yes, i am happy.
    What did you do to resolve signal issue? That's the issue I was having with mine BBB100-3 (PRD63118-001)
    08-18-18 12:05 PM
  13. NikOnBB's Avatar
    What did you do to resolve signal issue? That's the issue I was having with mine BBB100-3 (PRD63118-001)
    See conite's first respond in this thread.
    08-18-18 12:26 PM
  14. gjh1978's Avatar
    Got it.
    Did you also have "no service" before modifications were made?
    08-18-18 01:11 PM
  15. conite's Avatar
    Got it.
    Did you also have "no service" before modifications were made?
    For a different reason. His first attempt used a bad batch file.
    08-18-18 01:18 PM
  16. gjh1978's Avatar
    For a different reason. His first attempt used a bad batch file.
    Why wouldn't it stand to reason mine was a similar situation?
    08-18-18 01:20 PM
  17. conite's Avatar
    Why wouldn't it stand to reason mine was a similar situation?
    You didn't use the improperly coded Mac installer.
    08-18-18 01:21 PM
  18. gjh1978's Avatar
    You didn't use the improperly coded Mac installer.
    But, what if...
    08-18-18 02:40 PM

Similar Threads

  1. Where is BlackBerry Motion Autoloaders?
    By farajzadeh in forum BlackBerry Motion
    Replies: 14
    Last Post: 09-16-18, 08:47 AM
  2. Vibrate and rings with ring option off
    By Dave 131313 in forum BlackBerry KEYone
    Replies: 1
    Last Post: 08-20-18, 02:06 PM
  3. Best Browser with a Dark Theme and/or Night Mode
    By The_Dark_Knight_Forever in forum BlackBerry Android OS
    Replies: 10
    Last Post: 08-19-18, 11:42 PM
  4. Issue with Android Auto
    By karumudi7 in forum BlackBerry KEYone
    Replies: 6
    Last Post: 08-18-18, 03:25 PM
  5. BlackBerry rolls out their latest app updates with plenty of improvements!
    By CrackBerry News in forum CrackBerry.com News Discussion
    Replies: 0
    Last Post: 08-17-18, 03:10 PM
LINK TO POST COPIED TO CLIPBOARD