1. ramin afshan's Avatar
    hi
    i have keyone boronz edition with PRD 63736-008 stuck on bootloader
    in bootloader mode: factory -1 !!! whats this??
    i'm update phone with mobile upgrade tool and with ABT975 auotoloader but stuck in bootloader yet !!
    Attached Thumbnails Problem With Keyone Bronze-screenshot_20191206-152311.jpg  
    12-06-19 06:54 AM
  2. conite's Avatar
    hi
    i have keyone boronz edition with PRD 63736-008 stuck on bootloader
    in bootloader mode: factory -1 !!! whats this??
    i'm update phone with mobile upgrade tool and with ABT975 auotoloader but stuck in bootloader yet !!
    Did both the Tool and the autoloader seem to finish without error?
    12-06-19 08:11 AM
  3. ramin afshan's Avatar
    Did both the Tool and the autoloader seem to finish without error?
    i'm dont see any error
    autoloader was compelete and write full , but phone stuck on blackberry logo
    whats this in bootloader factory -1 !!! whats mean??
    12-06-19 08:14 AM
  4. conite's Avatar
    i'm dont see any error
    autoloader was compelete and write full , but phone stuck on blackberry logo
    whats this in bootloader factory -1 !!! whats mean??
    Try the secondary boatloader. Turn off the device and then turn it back on by holding pwr and UP volume.

    Then run the Tool again.
    12-06-19 08:17 AM
  5. ramin afshan's Avatar
    Try the secondary boatloader. Turn off the device and then turn it back on by holding pwr and UP volume.

    Then run the Tool again.
    ok , thanks , I'll test this way tomorrow
    12-06-19 08:19 AM
  6. ramin afshan's Avatar
    i'm flash with secondary boatloader and problem not solved, can you help me??



    Code:
    Host type: Windows
    
    ==================== Rebooting device into bootloader ...
    NOTE:
    - If script gets stuck at < waiting for device > for more
      than 30 seconds, reboot by holding the power and volume down (or up) button
      until fastboot starts.
      Ensure your udev rules are set up correctly by following the instructions
      https://wikis.rim.net/display/Avengers/USB+Drivers
    * daemon not running; starting now at tcp:5037
    * daemon started successfully
    error: no devices/emulators found
    Please reboot your device into bootloader mode:
      power cycle the device and keep the volume down key pressed
    
    Wait for 1 minute ...
    No need to load bbpcproxy/pcauthtool, device has no password
    Version:        3.4.1
    Loading OS version:     ABT975
    boot.img.beta.sig
    boot.img.carrier.sig
    boot.img.production.sig
    boot.img.sig
    recovery.img.beta.sig
    recovery.img.carrier.sig
    recovery.img.production.sig
    recovery.img.sig
    found production signature file
    this is China device, use devcfg_cn.mbn
    erasing 'boot'...
    OKAY [  0.094s]
    finished. total time: 0.094s
    .\host\windows-x86\bin\fastboot.exe flash tz .\target\product\bbry_qc8953\qcbc\tz.mbn
    target reported max download size of 536870912 bytes
    sending 'tz' (1499 KB)...
    OKAY [  0.078s]
    writing 'tz'...
    OKAY [  0.110s]
    finished. total time: 0.188s
    .\host\windows-x86\bin\fastboot.exe flash devcfg .\target\product\bbry_qc8953\qcbc\devcfg_cn.mbn
    target reported max download size of 536870912 bytes
    sending 'devcfg' (40 KB)...
    OKAY [  0.062s]
    writing 'devcfg'...
    OKAY [  0.078s]
    finished. total time: 0.141s
    .\host\windows-x86\bin\fastboot.exe flash rpm .\target\product\bbry_qc8953\qcbc\rpm.mbn
    target reported max download size of 536870912 bytes
    sending 'rpm' (170 KB)...
    OKAY [  0.047s]
    writing 'rpm'...
    OKAY [  0.094s]
    finished. total time: 0.140s
    .\host\windows-x86\bin\fastboot.exe flash sbl1 .\target\product\bbry_qc8953\sbl1_signed.mbn
    target reported max download size of 536870912 bytes
    sending 'sbl1' (365 KB)...
    OKAY [  0.047s]
    writing 'sbl1'...
    OKAY [  0.094s]
    finished. total time: 0.156s
    .\host\windows-x86\bin\fastboot.exe flash aboot .\target\product\bbry_qc8953\emmc_appsboot.mbn
    target reported max download size of 536870912 bytes
    sending 'aboot' (1742 KB)...
    OKAY [  0.078s]
    writing 'aboot'...
    OKAY [  0.109s]
    finished. total time: 0.188s
    rebooting into bootloader...
    OKAY [  0.016s]
    finished. total time: 0.016s
    Waiting for 10 seconds for the device to reboot
    If bbpcproxy/pcauthtool is used, it will allow for the connection to be re-established
    .\host\windows-x86\bin\fastboot.exe flash recoverysig .\target\product\bbry_qc8953\sig\recovery.img.production.sig
    target reported max download size of 534773760 bytes
    sending 'recoverysig' (0 KB)...
    OKAY [  0.047s]
    writing 'recoverysig'...
    OKAY [  0.094s]
    finished. total time: 0.141s
    .\host\windows-x86\bin\fastboot.exe flash bootsig .\target\product\bbry_qc8953\sig\boot.img.production.sig
    target reported max download size of 534773760 bytes
    sending 'bootsig' (0 KB)...
    OKAY [  0.062s]
    writing 'bootsig'...
    OKAY [  0.078s]
    finished. total time: 0.141s
    .\host\windows-x86\bin\fastboot.exe flash cache .\target\product\bbry_qc8953\cache.img
    target reported max download size of 534773760 bytes
    erasing 'cache'...
    OKAY [  0.078s]
    sending 'cache' (18800 KB)...
    OKAY [  0.500s]
    writing 'cache'...
    OKAY [  0.172s]
    finished. total time: 0.750s
    .\host\windows-x86\bin\fastboot.exe flash userdata .\target\product\bbry_qc8953\userdata.img
    target reported max download size of 534773760 bytes
    erasing 'userdata'...
    OKAY [  0.422s]
    sending 'userdata' (137718 KB)...
    OKAY [  3.375s]
    writing 'userdata'...
    OKAY [  0.766s]
    finished. total time: 4.578s
    .\host\windows-x86\bin\fastboot.exe flash dsp .\target\product\bbry_qc8953\adspso.bin
    target reported max download size of 534773760 bytes
    sending 'dsp' (16384 KB)...
    OKAY [  0.438s]
    writing 'dsp'...
    OKAY [  0.141s]
    finished. total time: 0.594s
    .\host\windows-x86\bin\fastboot.exe flash recovery .\target\product\bbry_qc8953\recovery.img
    target reported max download size of 534773760 bytes
    sending 'recovery' (31732 KB)...
    OKAY [  0.813s]
    writing 'recovery'...
    OKAY [  0.219s]
    finished. total time: 1.031s
    .\host\windows-x86\bin\fastboot.exe flash system .\target\product\bbry_qc8953\system.img
    target reported max download size of 534773760 bytes
    erasing 'system'...
    OKAY [  0.766s]
    sending sparse 'system' 1/8 (515930 KB)...
    OKAY [ 11.954s]
    writing 'system' 1/8...
    OKAY [  2.766s]
    sending sparse 'system' 2/8 (522179 KB)...
    OKAY [ 12.173s]
    writing 'system' 2/8...
    OKAY [  2.954s]
    sending sparse 'system' 3/8 (519386 KB)...
    OKAY [ 12.563s]
    writing 'system' 3/8...
    OKAY [  3.938s]
    sending sparse 'system' 4/8 (506356 KB)...
    OKAY [ 11.719s]
    writing 'system' 4/8...
    OKAY [  3.484s]
    sending sparse 'system' 5/8 (516178 KB)...
    OKAY [ 11.954s]
    writing 'system' 5/8...
    OKAY [  2.594s]
    sending sparse 'system' 6/8 (515054 KB)...
    OKAY [ 12.423s]
    writing 'system' 6/8...
    OKAY [  3.157s]
    sending sparse 'system' 7/8 (458290 KB)...
    OKAY [ 10.813s]
    writing 'system' 7/8...
    OKAY [  2.860s]
    sending sparse 'system' 8/8 (73632 KB)...
    OKAY [  1.703s]
    writing 'system' 8/8...
    OKAY [  0.422s]
    finished. total time: 231.831s
    .\host\windows-x86\bin\fastboot.exe flash boot .\target\product\bbry_qc8953\boot.img
    target reported max download size of 534773760 bytes
    sending 'boot' (31732 KB)...
    OKAY [  0.750s]
    writing 'boot'...
    OKAY [  0.234s]
    finished. total time: 0.984s
    .\host\windows-x86\bin\fastboot.exe flash oempersist .\target\product\bbry_qc8953\oempersist.img
    target reported max download size of 534773760 bytes
    erasing 'oempersist'...
    OKAY [  0.094s]
    sending 'oempersist' (4952 KB)...
    OKAY [  0.157s]
    writing 'oempersist'...
    OKAY [  0.094s]
    finished. total time: 0.344s
    .\host\windows-x86\bin\fastboot.exe flash modem .\target\product\bbry_qc8953\NON-HLOS-dschina.bin
    target reported max download size of 534773760 bytes
    sending 'modem' (98304 KB)...
    OKAY [  2.422s]
    writing 'modem'...
    OKAY [  0.531s]
    finished. total time: 2.954s
    .\host\windows-x86\bin\fastboot.exe flash oem .\target\product\bbry_qc8953\oem_common.img
    target reported max download size of 534773760 bytes
    erasing 'oem'...
    OKAY [  0.156s]
    sending 'oem' (412860 KB)...
    OKAY [ 10.001s]
    writing 'oem'...
    12-07-19 03:53 AM
  7. conite's Avatar
    i'm flash with secondary boatloader and problem not solved, can you help me??



    Code:
    Host type: Windows
    
    ==================== Rebooting device into bootloader ...
    NOTE:
    - If script gets stuck at < waiting for device > for more
      than 30 seconds, reboot by holding the power and volume down (or up) button
      until fastboot starts.
      Ensure your udev rules are set up correctly by following the instructions
      https://wikis.rim.net/display/Avengers/USB+Drivers
    * daemon not running; starting now at tcp:5037
    * daemon started successfully
    error: no devices/emulators found
    Please reboot your device into bootloader mode:
      power cycle the device and keep the volume down key pressed
    
    Wait for 1 minute ...
    No need to load bbpcproxy/pcauthtool, device has no password
    Version:        3.4.1
    Loading OS version:     ABT975
    boot.img.beta.sig
    boot.img.carrier.sig
    boot.img.production.sig
    boot.img.sig
    recovery.img.beta.sig
    recovery.img.carrier.sig
    recovery.img.production.sig
    recovery.img.sig
    found production signature file
    this is China device, use devcfg_cn.mbn
    erasing 'boot'...
    OKAY [  0.094s]
    finished. total time: 0.094s
    .\host\windows-x86\bin\fastboot.exe flash tz .\target\product\bbry_qc8953\qcbc\tz.mbn
    target reported max download size of 536870912 bytes
    sending 'tz' (1499 KB)...
    OKAY [  0.078s]
    writing 'tz'...
    OKAY [  0.110s]
    finished. total time: 0.188s
    .\host\windows-x86\bin\fastboot.exe flash devcfg .\target\product\bbry_qc8953\qcbc\devcfg_cn.mbn
    target reported max download size of 536870912 bytes
    sending 'devcfg' (40 KB)...
    OKAY [  0.062s]
    writing 'devcfg'...
    OKAY [  0.078s]
    finished. total time: 0.141s
    .\host\windows-x86\bin\fastboot.exe flash rpm .\target\product\bbry_qc8953\qcbc\rpm.mbn
    target reported max download size of 536870912 bytes
    sending 'rpm' (170 KB)...
    OKAY [  0.047s]
    writing 'rpm'...
    OKAY [  0.094s]
    finished. total time: 0.140s
    .\host\windows-x86\bin\fastboot.exe flash sbl1 .\target\product\bbry_qc8953\sbl1_signed.mbn
    target reported max download size of 536870912 bytes
    sending 'sbl1' (365 KB)...
    OKAY [  0.047s]
    writing 'sbl1'...
    OKAY [  0.094s]
    finished. total time: 0.156s
    .\host\windows-x86\bin\fastboot.exe flash aboot .\target\product\bbry_qc8953\emmc_appsboot.mbn
    target reported max download size of 536870912 bytes
    sending 'aboot' (1742 KB)...
    OKAY [  0.078s]
    writing 'aboot'...
    OKAY [  0.109s]
    finished. total time: 0.188s
    rebooting into bootloader...
    OKAY [  0.016s]
    finished. total time: 0.016s
    Waiting for 10 seconds for the device to reboot
    If bbpcproxy/pcauthtool is used, it will allow for the connection to be re-established
    .\host\windows-x86\bin\fastboot.exe flash recoverysig .\target\product\bbry_qc8953\sig\recovery.img.production.sig
    target reported max download size of 534773760 bytes
    sending 'recoverysig' (0 KB)...
    OKAY [  0.047s]
    writing 'recoverysig'...
    OKAY [  0.094s]
    finished. total time: 0.141s
    .\host\windows-x86\bin\fastboot.exe flash bootsig .\target\product\bbry_qc8953\sig\boot.img.production.sig
    target reported max download size of 534773760 bytes
    sending 'bootsig' (0 KB)...
    OKAY [  0.062s]
    writing 'bootsig'...
    OKAY [  0.078s]
    finished. total time: 0.141s
    .\host\windows-x86\bin\fastboot.exe flash cache .\target\product\bbry_qc8953\cache.img
    target reported max download size of 534773760 bytes
    erasing 'cache'...
    OKAY [  0.078s]
    sending 'cache' (18800 KB)...
    OKAY [  0.500s]
    writing 'cache'...
    OKAY [  0.172s]
    finished. total time: 0.750s
    .\host\windows-x86\bin\fastboot.exe flash userdata .\target\product\bbry_qc8953\userdata.img
    target reported max download size of 534773760 bytes
    erasing 'userdata'...
    OKAY [  0.422s]
    sending 'userdata' (137718 KB)...
    OKAY [  3.375s]
    writing 'userdata'...
    OKAY [  0.766s]
    finished. total time: 4.578s
    .\host\windows-x86\bin\fastboot.exe flash dsp .\target\product\bbry_qc8953\adspso.bin
    target reported max download size of 534773760 bytes
    sending 'dsp' (16384 KB)...
    OKAY [  0.438s]
    writing 'dsp'...
    OKAY [  0.141s]
    finished. total time: 0.594s
    .\host\windows-x86\bin\fastboot.exe flash recovery .\target\product\bbry_qc8953\recovery.img
    target reported max download size of 534773760 bytes
    sending 'recovery' (31732 KB)...
    OKAY [  0.813s]
    writing 'recovery'...
    OKAY [  0.219s]
    finished. total time: 1.031s
    .\host\windows-x86\bin\fastboot.exe flash system .\target\product\bbry_qc8953\system.img
    target reported max download size of 534773760 bytes
    erasing 'system'...
    OKAY [  0.766s]
    sending sparse 'system' 1/8 (515930 KB)...
    OKAY [ 11.954s]
    writing 'system' 1/8...
    OKAY [  2.766s]
    sending sparse 'system' 2/8 (522179 KB)...
    OKAY [ 12.173s]
    writing 'system' 2/8...
    OKAY [  2.954s]
    sending sparse 'system' 3/8 (519386 KB)...
    OKAY [ 12.563s]
    writing 'system' 3/8...
    OKAY [  3.938s]
    sending sparse 'system' 4/8 (506356 KB)...
    OKAY [ 11.719s]
    writing 'system' 4/8...
    OKAY [  3.484s]
    sending sparse 'system' 5/8 (516178 KB)...
    OKAY [ 11.954s]
    writing 'system' 5/8...
    OKAY [  2.594s]
    sending sparse 'system' 6/8 (515054 KB)...
    OKAY [ 12.423s]
    writing 'system' 6/8...
    OKAY [  3.157s]
    sending sparse 'system' 7/8 (458290 KB)...
    OKAY [ 10.813s]
    writing 'system' 7/8...
    OKAY [  2.860s]
    sending sparse 'system' 8/8 (73632 KB)...
    OKAY [  1.703s]
    writing 'system' 8/8...
    OKAY [  0.422s]
    finished. total time: 231.831s
    .\host\windows-x86\bin\fastboot.exe flash boot .\target\product\bbry_qc8953\boot.img
    target reported max download size of 534773760 bytes
    sending 'boot' (31732 KB)...
    OKAY [  0.750s]
    writing 'boot'...
    OKAY [  0.234s]
    finished. total time: 0.984s
    .\host\windows-x86\bin\fastboot.exe flash oempersist .\target\product\bbry_qc8953\oempersist.img
    target reported max download size of 534773760 bytes
    erasing 'oempersist'...
    OKAY [  0.094s]
    sending 'oempersist' (4952 KB)...
    OKAY [  0.157s]
    writing 'oempersist'...
    OKAY [  0.094s]
    finished. total time: 0.344s
    .\host\windows-x86\bin\fastboot.exe flash modem .\target\product\bbry_qc8953\NON-HLOS-dschina.bin
    target reported max download size of 534773760 bytes
    sending 'modem' (98304 KB)...
    OKAY [  2.422s]
    writing 'modem'...
    OKAY [  0.531s]
    finished. total time: 2.954s
    .\host\windows-x86\bin\fastboot.exe flash oem .\target\product\bbry_qc8953\oem_common.img
    target reported max download size of 534773760 bytes
    erasing 'oem'...
    OKAY [  0.156s]
    sending 'oem' (412860 KB)...
    OKAY [ 10.001s]
    writing 'oem'...
    The procedure seemed to go well, so I'm at loss.
    12-07-19 09:25 AM
  8. Chuck Finley69's Avatar
    When you’ve broken the hardware, broken the software and broken the man, conite, I’m not sure what’s left. All we have in Florida is Captain Morgan and Narcan left, so let me know conite......
    12-07-19 11:38 AM
  9. conite's Avatar
    When you’ve broken the hardware, broken the software and broken the man, conite, I’m not sure what’s left. All we have in Florida is Captain Morgan and Narcan left, so let me know conite......
    Too late.
    12-07-19 11:52 AM

Similar Threads

  1. What is happening with the mobile network on my Passport??
    By Dejan Vitomirov in forum Ask a Question
    Replies: 28
    Last Post: 12-20-19, 09:54 AM
  2. Email setup problem
    By Corvette1984 in forum BlackBerry Mobile Support
    Replies: 12
    Last Post: 12-08-19, 09:43 PM
  3. Help with Hub Setting
    By curves2000 in forum BlackBerry 10 OS
    Replies: 2
    Last Post: 12-06-19, 03:07 PM
  4. Evernote may have problems.
    By nevilleadaniels in forum BlackBerry KEY2
    Replies: 1
    Last Post: 12-05-19, 03:44 PM
  5. Protect your new tech with a warranty from Upsie
    By CrackBerry News in forum CrackBerry.com News Discussion
    Replies: 0
    Last Post: 12-04-19, 07:12 PM
LINK TO POST COPIED TO CLIPBOARD