[chang69]

Hi all, I measured the KEYone charging voltage and amps using my Anker USB charger.

[BadGoliath42]

Wow, that's some juice there! Could your KEYone keep charging at this rate for long, and does it become hot? Would be interesting to see the battery temperature after some time charging at this current.

Posted via CB10 with my PassportSQW100-1/10.3.3.2205.

[BB-JAM215]

Hi all, I measured the KEYone charging voltage and amps using my Anker USB charger.

The standard KEYone fast charger is rated at 2.0 Amps max. Must be getting warm at 2.5 amps, or was that just the initial current?

[chang69]

The standard KEYone fast charger is rated at 2.0 Amps max. Must be getting warm at 2.5 amps, or was that just the initial current?

No it stayed actually quite cold. The amp gradually degraded to 2A and then lower.

[Since2007]

I was just sent a 24W/4.8A car charger. Would it this damage my KeyOne?

[JPD404]

The original KEYone's charger delivers 9 volts and the device picks between 1 and 2.3 amps, I believe, depending on the battery level.

The reason why in that charge regime it's showing nearly 2.5 amps is because the source is only delivering 6 volts, which is very strange.

[anon(8679041)]

Received today Blitzwolf QC charger type-c 3.0 and a 2.0 cable, also blitzwolf.
The charger itself gets pretty hot while charging, the phone gets a bit hotter, especially on the back, where the logo is.

Does anyone share my experience?

p.s. I charge the phone while it is turned off completely.