08-10-17 01:43 PM
45 12
tools
  1. MikeWrightBB's Avatar
    This is awesome. Will that BB logo cutout fit with that of the phone ?

    Sent from my  BlackBerry Passport™
    Unfortunately for it to be the right orientation from the front of the stand it's backwards for the one on the phone :/

    Posted via CB10
    03-27-17 10:47 AM
  2. chang69's Avatar
    Very cool. Super job.
    03-27-17 12:52 PM
  3. Dragnet Sound's Avatar
    Neat concept to reality. How great your imagination can do eh.
    I have a few ideas myself buthandmade with wood.
    03-27-17 02:38 PM
  4. JWWDUKE's Avatar
    That looks pretty sweet? Are you going to sell them?

    Posted via CB10
    03-27-17 02:44 PM
  5. ummie4's Avatar
    Don't think he can sell it as it has a trademarked logo on it that doesn't belong to him. Take the logo off and your good to go
    03-27-17 06:14 PM
  6. iamci's Avatar
    One other recommendations would be to make the stand bit larger so taking phone in and out wouldn't be too hard.

    Posted via CB10
    Also if you decide to use a phone case, so it can fit properly. Nice job though. I'd buy.
    03-27-17 08:19 PM
  7. BigBadWulf's Avatar
    Don't think he can sell it as it has a trademarked logo on it that doesn't belong to him. Take the logo off and your good to go
    True, but he could as for consent.
    03-27-17 09:02 PM
  8. tonythecanuck's Avatar
    Awesome! Brilliant!

    I wish I could have a charging stand for my Dtek60 with its off-centre USB port!
    03-27-17 10:04 PM
  9. IvanTheTolerable's Avatar
    No link still :c

    BB10 will outlast Android! Just you wait! Stage 1: denial
    03-27-17 11:03 PM
  10. Plazmic Flame's Avatar
    Where do I send the monies?!
    03-27-17 11:59 PM
  11. Mattster723's Avatar
    Great job! Now just to get you that contract with BB or TCL!
    BigBadWulf likes this.
    03-28-17 09:41 AM
  12. MikeWrightBB's Avatar
    No link still :c

    BB10 will outlast Android! Just you wait! Stage 1: denial
    Here is the link: https://www.thingiverse.com/thing:2207467.

    Thingiverse was making me wait 24 hours before publishing.
    BigBadWulf likes this.
    03-28-17 10:50 AM
  13. MikeWrightBB's Avatar
    That looks pretty sweet? Are you going to sell them?

    Posted via CB10
    Potentially, I would have to remove the logo to sell, and I'd like to have a device to ensure it fits properly first.
    jakie55 likes this.
    03-28-17 10:50 AM
  14. littlebuff's Avatar
    OP, you could beat BlackBerry Mobile on the release date :-)
    I'm sold.

    Posted from my  Passport
    03-28-17 11:07 AM
  15. ummie4's Avatar
    Since there is interest in fan made stuff here I think I'll put my KEYone wallet as WTT: in the marketplace
    BigBadWulf likes this.
    03-28-17 12:46 PM
  16. S1lv1o's Avatar
    Nice! Make it a USB 3 / usb-c hub and they could actually sell the thing, never got one for my Passport SE.
    03-28-17 02:12 PM
  17. Chris_R's Avatar
    Nice, my only suggestion would be to angle it slightly more back maybe? Either way, let me know if you plan on selling it because you'd have a customer here. Make sure it's usb-c though, lol.

    Posted without the aid of AutoCorrect with my physical keyboard via CB10
    I love that one too, wow. Agreeing with slagman5's comment about the angle (and USB-C). Not that it falls out :-)



    Posted via CB10
    03-28-17 03:46 PM
  18. IvanTheTolerable's Avatar
    How does it fit? The thingverse says something about a v2?
    the brother likes this.
    07-13-17 06:58 PM
  19. donnation's Avatar
    That is awesome! Any chance you'll be uploading the design? I'd love to print one myself, would be happy to pay for it.
    jamesharmeling likes this.
    07-14-17 06:52 AM
  20. gsm_dealer08's Avatar
    I had this project 3D printed from this guy I found on eBay. It cost £20 including the shipping. The finish is not as good as the one you got but it is OK. I didn't like the gloss finish so I gave it a matte black finish with a spray can. Fitting the USB cable was not fun.. I do not have acces to that brand you designed the cradle for so I had to take the hobby knife to the poor unsuspecting OEM one. It did fit eventually and now it works great. The connector does not stick all the way out so it does not 'click',making it much easier to disconnect the phone. Thank you MikeWrightBB for designing it! Great work!
    (Sorry about the inverted photos. I they were inverted after upload,for some strange reason)
    Attached Thumbnails KEYone charging stand!-img_20170810_1759083.jpg   KEYone charging stand!-img_20170810_1759218.jpg   KEYone charging stand!-dsc_0026.jpg   KEYone charging stand!-dsc_0024.jpg   KEYone charging stand!-dsc_0027.jpg  

    KEYone charging stand!-dsc_0025.jpg  
    Nels and jamesharmeling like this.
    08-10-17 01:43 PM
45 12

Similar Threads

  1. Dubai KEYone Waiting Room
    By Snappy Phoenix in forum BlackBerry KEYone
    Replies: 137
    Last Post: 07-16-17, 06:40 PM
  2. KEYone Shield Wallpaper
    By Pootermobile in forum BlackBerry KEYone
    Replies: 26
    Last Post: 04-23-17, 05:04 PM
  3. Leaving Passport for KEYone
    By Edijs Benoit in forum BlackBerry Passport
    Replies: 173
    Last Post: 04-01-17, 08:58 PM
  4. Will Passport Memopad notes data transfer to the KeyOne?
    By picardjb in forum Ask a Question
    Replies: 5
    Last Post: 03-26-17, 05:12 PM
  5. Download this free BlackBerry KEYone shield wallpaper!
    By CrackBerry News in forum CrackBerry.com News Discussion & Contests
    Replies: 0
    Last Post: 03-25-17, 06:20 PM
LINK TO POST COPIED TO CLIPBOARD