07-16-19 06:34 PM
64 123
tools
  1. conite's Avatar
    Correct me if I'm wrong though, once you use an autoloader, the updates from provider will no longer work?
    Only if you install an OS that your device variant doesn't get at some point.

    Worst case - install the next one with an autoloader too.
    07-06-19 03:19 PM
  2. RLeeSimon's Avatar
    I haven't torn it apart yet, but this is a true June OS build with the June patch level.
    Does it force "update" to "inbox" alias "crippled Hub" ??
    07-06-19 05:58 PM
  3. conite's Avatar
    Does it force "update" to "inbox" alias "crippled Hub" ??
    Autoloaders always contain the latest app versions as of build time.
    07-06-19 06:06 PM
  4. pilot-leo's Avatar
    I’m guessing this is the same build Rogers is going to push to their customers?
    07-06-19 10:21 PM
  5. Polaris2222's Avatar
    Conite - is there a set of detailed, step by step, instructions somewhere to follow? Why I ask is that boot to fastboot means little to me, remove password (which one), etc. As you can tell I am not the techiest person on the planet Terra.
    07-07-19 09:02 PM
  6. conite's Avatar
    Conite - is there a set of detailed, step by step, instructions somewhere to follow? Why I ask is that boot to fastboot means little to me, remove password (which one), etc. As you can tell I am not the techiest person on the planet Terra.
    Download autoloader to your PC and unzip it.

    Turn off your device password, and then shut the phone off.

    Once off, hold the power button and the down volume buttons at the same time, and within a few seconds you will see a service menu - this is fastboot mode.

    Plug in the device to your computer.

    Run the autoloader - either wipe or no-wipe .bat file.
    Gene Fells, chertik0ff and TX3 like this.
    07-07-19 09:41 PM
  7. Polaris2222's Avatar
    Thanks, Conite. Let me also add my thanks for all of the commentary and work you do for the folks here.
    07-07-19 10:43 PM
  8. chertik0ff's Avatar
    I just updated my Indian version limited edition KEYone to the latest security patch. The process was easier than an automatic update. This specific KEYone was stuck on January patch and will likely not get any other updates. So i would echo Palaris2222 - thank you Conite for all the work you do for this community!
    07-07-19 11:09 PM
  9. jackcarr's Avatar
    Thanks for the directions, Conite.
    07-08-19 09:58 AM
  10. Jignesh Shah1's Avatar
    Download autoloader to your PC and unzip it.

    Turn off your device password, and then shut the phone off.

    Once off, hold the power button and the down volume buttons at the same time, and within a few seconds you will see a service menu - this is fastboot mode.

    Plug in the device to your computer.

    Run the autoloader - either wipe or no-wipe .bat file.
    Which one is more recommended? Wipe or no-wipe?
    07-08-19 12:55 PM
  11. conite's Avatar
    Which one is more recommended? Wipe or no-wipe?
    I've actually never had a problem with either. Regardless, I'd start with the no-wipe option.
    07-08-19 01:20 PM
  12. Jignesh Shah1's Avatar
    updated..used an autoloader for first time..
    done successfully

    thanks conite
    07-08-19 02:05 PM
  13. Jignesh Shah1's Avatar
    what are the changes? any major changes since January update?
    07-08-19 02:06 PM
  14. conite's Avatar
    what are the changes? any major changes since January update?
    There haven't been any feature updates in well over a year. Basically security patches, and small bug fixes.
    07-08-19 02:49 PM
  15. Polaris2222's Avatar
    Download autoloader to your PC and unzip it.

    Turn off your device password, and then shut the phone off.

    Once off, hold the power button and the down volume buttons at the same time, and within a few seconds you will see a service menu - this is fastboot mode.

    Plug in the device to your computer.

    Run the autoloader - either wipe or no-wipe .bat file.
    One last dumb question, Conite. When you say turnoff the device password do you mean the autowipe after 10 tries? Settings>security and location>screen lock>automatically wipe>off?
    07-08-19 07:13 PM
  16. conite's Avatar
    One last dumb question, Conite. When you say turnoff the device password do you mean the autowipe after 10 tries? Settings>security and location>screen lock>automatically wipe>off?
    No. I mean select "none" for password.
    07-08-19 07:15 PM
  17. Polaris2222's Avatar
    Thanks again.
    07-08-19 07:31 PM
  18. Maureen2019's Avatar
    So, there is no way to use the autoloader if I own a Mac, right?
    Damn, and yes I could likely borrow a PC, just super busy right now....
    07-08-19 09:10 PM
  19. conite's Avatar
    So, there is no way to use the autoloader if I own a Mac, right?
    Damn, and yes I could likely borrow a PC, just super busy right now....
    I don't have a Mac (can't test), so I would say stick to the Windows .bat files.
    07-08-19 10:23 PM
  20. aravind20m's Avatar
    Well isn't this a pleasant surprise! Thank you Telus.

    Unlike AT&T, it's a June OS build too.

    As per usual, no Indonesia, China, or CDMA.

    Remove password, boot to fastboot, plug in device, and run.

    https://mega.nz/#!sQg01CpL!ZnumQ__-G...9Xz-bBS_FavpP8
    I am with Indian version - Thank you @conite .. It works for me .
    07-09-19 10:33 AM
  21. yamahammer's Avatar
    Thanks Conite, working well on my pre production KEYᵒⁿᵉ.
    the_boon likes this.
    07-10-19 07:55 PM
  22. Polaris2222's Avatar
    Hi Conite. Just getting around to using your autoloader. Fast question - before turning off the password and changing the phone over fastboot mode, I plugged the phone into my pc just in case it didn't see phone for whatever reason. The PC sees the phone but when you click on the phone in the directory it shows "this folder is empty".

    Is that normal and I should go ahead and use the autoloader.

    Thanks again.
    07-14-19 02:10 PM
  23. conite's Avatar
    Hi Conite. Just getting around to using your autoloader. Fast question - before turning off the password and changing the phone over fastboot mode, I plugged the phone into my pc just in case it didn't see phone for whatever reason. The PC sees the phone but when you click on the phone in the directory it shows "this folder is empty".

    Is that normal and I should go ahead and use the autoloader.

    Thanks again.
    Totally normal. Just proceed.

    BTW, you have to select file transfer on the device by swiping down if you wish to see your files via Windows Explorer.
    07-14-19 02:13 PM
  24. Polaris2222's Avatar
    Thanks Conite. Will go ahead in a moment. When you say swipe down - do you mean on the home screen where flashlight, portrai, settings show up?
    07-14-19 02:29 PM
  25. conite's Avatar
    Thanks Conite. Will go ahead in a moment. When you say swipe down - do you mean on the home screen where flashlight, portrai, settings show up?
    When you're plugged in, there is a notification regarding USB status. Select that and you'll see choices.
    07-14-19 02:50 PM
64 123

Similar Threads

  1. Individual ringtones for favorite users?
    By muecke63 in forum BlackBerry KEY2
    Replies: 4
    Last Post: 07-03-19, 02:23 PM
  2. Please help with double notifications on KEYone!
    By 28Darren28 in forum BlackBerry KEYone
    Replies: 2
    Last Post: 07-03-19, 01:06 PM
LINK TO POST COPIED TO CLIPBOARD