04-13-18 01:09 AM
86 123 ...
tools
  1. conite's Avatar
    Here is the AAV119 Autoloader (Feb 5 patch level) for the KEYᵒⁿᵉ.

    It should work on most devices apart from AT&T, Sprint, and China.

    Remove passwords, reboot to fastboot mode, and run batch file of your choice (wipe or no-wipe).

    Sometimes, the phone can get stuck when booting for the first time. If this happens to you, make sure you've waited long enough, and then just hold the power button down to force a reboot. Should be fine after that.

    Thanks again @jcrutchvt2010 for providing the template.

    https://mega.nz/#!FJZxgLwA!Um72UEuwl...q7lIcQ-1Se8MMU


    MD5: 8417360674F4E320DF031561DBCD0207
    SHA1: 3F1677FC593A0C1930940B479FAA0485D68767B4
    Last edited by conite; 03-20-18 at 10:00 AM.
    02-25-18 11:01 AM
  2. deezy87's Avatar
    Thanks for this, Conite!

    Darn, look at getting some better bandwidth from a better ISP!!!!!



    [I'm just busting your chops, don't take this seriously]
    Last edited by deezy87; 02-25-18 at 12:04 PM.
    02-25-18 11:07 AM
  3. jcrutchvt2010's Avatar
    Alternative file link if needed. If you want to no wipe, use the flashallnowipe.bat and follow conite's OP instructions. Thanks @conite for posting!

    https://www.androidfilehost.com/?fid=890129502657585435
    UrbanGlowCam likes this.
    02-25-18 12:31 PM
  4. deezy87's Avatar
    Looks like this update 'broke' my keyone.

    It loaded everything fine, and once it finished it just has the initial screen and then nothing.
    02-25-18 12:32 PM
  5. conite's Avatar
    Looks like this update 'broke' my keyone.

    It loaded everything fine, and once it finished it just has the initial screen and then nothing.
    ¯\_(ツ)_/¯

    What device variant do you have? I have BBB100-1, PRD-63116-001.
    02-25-18 12:37 PM
  6. IvanTheTolerable's Avatar
    Has the ota been pushed to unlocked -1 devices?
    02-25-18 12:37 PM
  7. deezy87's Avatar
    ¯\_(ツ)_/¯

    What device variant do you have? I have BBB100-1, PRD-63116-001.
    https://uploads.tapatalk-cdn.com/201...ca94ff3ae1.jpg
    The screen vibrates when it looks like it's about to boot up, I get the BlackBerry Powered By Android screen. Then it goes black and nothing happens.

    I have BBB100-1, PRD-63116-005
    02-25-18 12:39 PM
  8. conite's Avatar
    Has the ota been pushed to unlocked -1 devices?
    Only some BBB100-2 devices so far.
    02-25-18 12:39 PM
  9. conite's Avatar
    The screen vibrates when it looks like it's about to boot up, I get the BlackBerry Powered By Android screen. Then it goes black and nothing happens.

    I have BBB100-1, PRD-63116-005
    Download it again. I can assure you that it runs perfectly on the BBB100-1.
    deezy87 likes this.
    02-25-18 12:42 PM
  10. deezy87's Avatar
    Download it again. I can assure you that it runs perfectly on the BBB100-1.
    I shall download again and give it another shot!

    Thanks for the insight and help!!!
    02-25-18 12:45 PM
  11. deezy87's Avatar
    Download it again. I can assure you that it runs perfectly on the BBB100-1.
    It is now saying 'Loader is not valid for this device'

    AAV119 Autoloader for KEYone-aav119problems.png
    02-25-18 01:05 PM
  12. conite's Avatar
    It is now saying 'Loader is not valid for this device'
    I will look into this further. In the meantime, use the Rogers-specific AAT498 autoloader to get you up and running again.
    02-25-18 01:08 PM
  13. deezy87's Avatar
    Okay... Don't know wtf happened. I ran the loader again and it seemed to have finally worked.
    FF22 likes this.
    02-25-18 01:11 PM
  14. deezy87's Avatar
    I will look into this further. In the meantime, use the Rogers-specific AAT498 autoloader to get you up and running again.
    Hey dude! It fixed itself somehow, some way. Don't know what happened there.

    Thanks for the help though!! Very much appreciated!!!!
    02-25-18 01:12 PM
  15. deezy87's Avatar
    I will look into this further. In the meantime, use the Rogers-specific AAT498 autoloader to get you up and running again.
    Just for fun I tried it again. The flashall file will run the first time, and then I am faced with the phone not booting up. Just doesn't get passed the the initail boot screen where it says 'BlackBerry Powered By Android'.

    Now I downloaded the file from post #3 @jcrutchvt2010. The flashall said it wasn't for the device, and the no wipe file did the trick.

    What could have been the issue(s)??
    Last edited by deezy87; 02-25-18 at 03:16 PM.
    02-25-18 02:10 PM
  16. conite's Avatar
    Just for fun I tried it again. The flashall file will run the first time, and then I am faced with the phone not booting up. Just doesn't get passed the the initail boot screen where it says 'BlackBerry Powered By Android'.

    Now I downloaded the file from post #3 @jcrutchv2010. The flashall said it wasn't for the device, and the no wipe file did the trick.

    What could have been the issue(s)??
    How did you make it work the first time?
    02-25-18 02:15 PM
  17. deezy87's Avatar
    How did you make it work the first time?
    The very first time it would open the command window and I'd select 'Y' for yes and let it do the thing. After it was done, 'push any key to close window' or whatever I did just that.

    Now it would just display the "BlackBerry Powered By Android" and wouldn't boot up past that.

    I decided to run the nowipe batch file [after putting it into fastboot] and that did the trick.

    Is this what you were asking for?
    02-25-18 02:20 PM
  18. conite's Avatar
    The very first time it would open the command window and I'd select 'Y' for yes and let it do the thing. After it was done, 'push any key to close window' or whatever I did just that.

    Now it would just display the "BlackBerry Powered By Android" and wouldn't boot up past that.

    I decided to run the nowipe batch file [after putting it into fastboot] and that did the trick.

    Is this what you were asking for?
    So both times, you did a wipe install followed by a nowipe install?
    deezy87 likes this.
    02-25-18 02:26 PM
  19. deezy87's Avatar
    So both times, you did a wipe install followed by a nowipe install?
    Yes, because it just wouldn't boot up after the initial screen where it says "BlackBerry Powered By Android"

    I thought to try the nowipe batch file, and after that was done its song and dance it actually booted up fully to the welcome screen.

    It did a wipe, but it just didn't fully boot up, it only booted up after I ran the nowipe batch file.***



    ***I'd have to unplug the keyone and then get it into fastboot, plug it back in and let it run the nowipe batch fall.
    02-25-18 02:30 PM
  20. devilincarnate's Avatar
    just had this update in the UK
    02-25-18 02:51 PM
  21. Arabianhorse's Avatar
    I have as well
    02-25-18 02:58 PM
  22. UrbanGlowCam's Avatar
    Yes, because it just wouldn't boot up after the initial screen where it says "BlackBerry Powered By Android"

    I thought to try the nowipe batch file, and after that was done its song and dance it actually booted up fully to the welcome screen.

    It did a wipe, but it just didn't fully boot up, it only booted up after I ran the nowipe batch file.***



    ***I'd have to unplug the keyone and then get it into fastboot, plug it back in and let it run the nowipe batch fall.
    Been struggling with the exact same thing. I've tried several times with the flashall and flashall-nowipe. I haven't had this issue on the last several autoloaders.

    I'm on a BBB100-1 Black Edition. This was using the MEGA link. Now I'm waiting for the Android File Host version to download. I'd imagine they're the same file though, no?
    02-25-18 03:11 PM
  23. deezy87's Avatar
    Been struggling with the exact same thing. I've tried several times with the flashall and flashall-nowipe. I haven't had this issue on the last several autoloaders.

    I'm on a BBB100-1 Black Edition. This was using the MEGA link. Now I'm waiting for the Android File Host version to download. I'd imagine they're the same file though, no?
    Yes, they are the same.

    BUT as odd as it is, the file from @jcrutchvt2010 on post #3 seemed to have gotten me out of the area where I was stuck. I ran the no wipe batch file after putting the device back into fastboot.

    Hope this helps your case as well!
    02-25-18 03:13 PM
  24. UrbanGlowCam's Avatar
    Yes, they are the same.

    BUT as odd as it is, the file from @jcrutchvt2010 on post #3 seemed to have gotten me out of the area where I was stuck. I ran the no wipe batch file after putting the device back into fastboot.

    Hope this helps your case as well!
    Yeah, that's why I'm trying it based on your feedback earlier. Thanks!
    02-25-18 03:29 PM
  25. deezy87's Avatar
    Yeah, that's why I'm trying it based on your feedback earlier. Thanks!
    No need to thank me lol
    02-25-18 03:30 PM
86 123 ...

Similar Threads

  1. Please tell me the Keyone (black, silver, bronze) supports 4g+
    By Gavril Gheorghiasa in forum BlackBerry KEYone
    Replies: 21
    Last Post: 02-28-18, 01:39 PM
  2. Dark Mode vs Normal Mode in HUB - KeyOne
    By nimra in forum BlackBerry KEYone
    Replies: 9
    Last Post: 02-25-18, 10:38 PM
  3. Anyone knows Contact for Blackberry Android Device Support?
    By victorHTexas in forum BlackBerry Mobile Support
    Replies: 1
    Last Post: 02-25-18, 08:32 AM
LINK TO POST COPIED TO CLIPBOARD