[deezy87]

Found an autoloader made by our very own @jcrutchvt2010.

ABM374 December patch

Don't use if you are in China. Tested and working on my T-Mobile Key2. Don't recommend the no-wipe script but you can try if you desire. As always, use at your own risk and let me know if you have any questions. Thanks! This is tested and working on PRD-63825-002 so should work on all non-china devices.

https://androidfilehost.com/?fid=11410963190603875146

As always, wipe and no/wipe included.

Instructions for first-time flashers:

Remove any screen lock from your device first.
Download the zip file in the OP. Extract it. Turn off your phone. Press and hold power and volume down until you see the blackberry bootloader screen. Plug in your phone to your computer. Open a command prompt in the folder you extracted the downloaded file (In the folder, hold ctl, shift, then right click and you should see "open command prompt (or powershell) window from here). Then type flashall.bat and press enter.

This is all presuming you are using Windows. This will do a wipe (if you selected wipe script) and install the new version. Let me know if you have any questions. If you are on a mac/linux run the .sh scripts in terminal (make sure you are running as admin and again that your screen lock passwords are completely removed).

[RK_BB]

@deezy87 do you experience any of that?

If not, can you please share your device manufacturing build date?

In order to find manufactured date, people can go to phone dialpad and type in *#2886#, press "MANU" , go to the very top option and press "Traceability", press "Pass" and will show the date at bottom. To leave that mode, press "Pass" again, scroll all the way down and press "Exit"

[deezy87]

@deezy87 do you experience any of that?

If not, can you please share your device manufacturing build date?

In order to find manufactured date, people can go to phone dialpad and type in *#2886#, press "MANU" , go to the very top option and press "Traceability", press "Pass" and will show the date at bottom. To leave that mode, press "Pass" again, scroll all the way down and press "Exit"

NEVER had that issue.

20180628