1. conite's Avatar
    Here is the December patch for the KEY².

    As usual, this is NOT for Chinese, Russian, or Indian devices.

    (If you have an EU variant that has a PRD ending in -5xx, see below.)

    Remove device PIN/password, boot to bootloader screen, and run either flashall or flashallnowipe as per your preference.

    https://mega.nz/#!ZFQmhaqY!hxF8FPa9o...y5TTuCZJHGOWrg

    *********

    If you have an EU variant that has a PRD ending with -5xx, use this instead:

    https://mega.nz/#!RUBXXaRI!2kKRIzBrX...Bsz0Y1I2MnwLrQ
    Last edited by conite; 01-07-20 at 07:23 PM.
    01-07-20 06:31 PM
  2. Mauri5io's Avatar
    @conite can you please add description how to update for a clean/factory installation... I forgot how to do it
    01-08-20 02:03 PM
  3. conite's Avatar
    @conite can you please add description how to update for a clean/factory installation... I forgot how to do it
    Just use the flashall.bat file instead of the flashallnowipe.bat file.

    Just put the device into boatloader mode, plug it in, and run it.
    Mauri5io likes this.
    01-08-20 02:04 PM
  4. tuananhnew's Avatar
    Hi @conite
    can It using for BBF100-2 - PRD-63825-802?
    01-08-20 02:36 PM
  5. conite's Avatar
    Hi @conite
    can It using for BBF100-2 - PRD-63825-802?
    That's a pre-production demo model. Hard to say.
    01-08-20 04:40 PM
  6. WArcher's Avatar
    Thank you, again, @conite for sourcing and sharing. Very appreciated.
    01-08-20 09:40 PM
  7. tuananhnew's Avatar
    That's a pre-production demo model. Hard to say.
    for version ACF885 i can run in my driver. I thing i can try ACI448 But if it fail can i run ACF885 ?
    01-08-20 10:42 PM
  8. conite's Avatar
    for version ACF885 i can run in my driver. I thing i can try ACI448 But if it fail can i run ACF885 ?
    If ACF885 worked, this should too.
    01-08-20 10:43 PM
  9. tuananhnew's Avatar
    If ACF885 worked, this should too.
    I try! It ok in my driver! Thank you so much!
    01-08-20 11:12 PM
  10. ilyasbaig's Avatar
    hi Conite.. have a ME version with prd ending -001 any autoladers for this
    01-11-20 10:19 AM
  11. conite's Avatar
    hi Conite.. have a ME version with prd ending -001 any autoladers for this
    Yes. The first one.
    01-11-20 11:31 AM
  12. ilyasbaig's Avatar
    BY INSTALLING THE SOFTWARE, YOU ARE AGREEING TO BE BOUND BY THE BlackBerry
    Solution License Agreement which can be reviewed at www.blackberry.com/leg-
    al/bbsla. IF YOU HAVE ANY QUESTIONS OR CONCERNS ABOUT THE TERMS OF THIS AG-
    REEMENT, PLEASE CONTACT blackberry AT LEGALinfo@BLACKBERRY.COM. PLEASE READ
    THIS DOCUMENT CAREFULLY BEFORE INSTALLING OR USING THE SOFTWARE.
    ************************************************** *************************

    Note:If device is not in fastboot mode
    Please switch to fastboot mode by holding the power and volume down key for 30s
    This script will NOT wipe off all user data. Do you want to continue? [y/n]:y
    "Not Wiping"
    target reported max download size of 536870912 bytes
    sending 'tz_b' (1924 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.006s
    target reported max download size of 536870912 bytes
    sending 'devcfg_b' (48 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.006s
    target reported max download size of 536870912 bytes
    sending 'rpm_b' (219 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.007s
    target reported max download size of 536870912 bytes
    sending 'xbl_b' (2865 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.006s
    target reported max download size of 536870912 bytes
    sending 'hyp_b' (272 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.007s
    target reported max download size of 536870912 bytes
    sending 'pmic_b' (39 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.008s
    target reported max download size of 536870912 bytes
    sending 'abl_b' (268 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.010s
    target reported max download size of 536870912 bytes
    sending 'cmnlib_b' (217 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.007s
    target reported max download size of 536870912 bytes
    sending 'cmnlib64_b' (267 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.008s
    target reported max download size of 536870912 bytes
    sending 'keymaster_b' (308 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.007s
    target reported max download size of 536870912 bytes
    sending 'mdtpsecapp_b' (1053 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.008s
    ...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.007s
    rebooting into bootloader...
    OKAY [ 0.004s]
    finished. total time: 0.004s

    Waiting for 0 seconds, press a key to continue ...
    target reported max download size of 536870912 bytes
    sending 'bootsig' (0 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.008s
    target reported max download size of 536870912 bytes
    sending 'recoverysig' (0 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.008s
    target reported max download size of 536870912 bytes
    sending 'boot' (21884 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.009s
    target reported max download size of 536870912 bytes
    sending 'recovery' (21884 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.007s
    target reported max download size of 536870912 bytes
    erasing 'cache'...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.007s
    target reported max download size of 536870912 bytes
    sending 'modem' (111276 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.007s
    target reported max download size of 536870912 bytes
    sending 'dsp' (16384 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.011s
    target reported max download size of 536870912 bytes
    sending 'bluetooth' (556 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.007s
    target reported max download size of 536870912 bytes
    sending sparse 'vendor' 1/2 (518679 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.283s
    target reported max download size of 536870912 bytes
    erasing 'system'...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.009s
    target reported max download size of 536870912 bytes
    sending 'oem' (512557 KB)...
    FAILED (remote: Host unresponsive. bbpcproxy running?)
    finished. total time: 0.009s
    rebooting...

    finished. total time: 0.003s
    Press any key to close this window
    01-11-20 12:36 PM
  13. ilyasbaig's Avatar
    conite doesnt seem to work for me.. have a look at the cmd screen data... each and every step has failed
    01-11-20 12:38 PM
  14. conite's Avatar
    conite doesnt seem to work for me.. have a look at the cmd screen data... each and every step has failed
    Did you remove your device password first?
    Last edited by conite; 01-11-20 at 01:08 PM.
    01-11-20 12:40 PM
  15. ilyasbaig's Avatar
    awww... how imbecile of me....excitement to get over it fast blinded me from removing password.. thanks from prompting
    antony99 likes this.
    01-11-20 12:43 PM
  16. rfin16's Avatar
    Just got this now of a Key 2 LE. For those of us less knowledgeable, does this affect performance or is it just for security? Have had intermittent problems with APPS stopping working, though without any adjustments on my part most of these seem to have resolved themselves. Thanks for your feedback.
    01-13-20 07:56 PM
  17. conite's Avatar
    Just got this now of a Key 2 LE. For those of us less knowledgeable, does this affect performance or is it just for security? Have had intermittent problems with APPS stopping working, though without any adjustments on my part most of these seem to have resolved themselves. Thanks for your feedback.
    Patches at this late stage are essentially just security patches.
    01-13-20 08:43 PM
  18. Jeroenbelg's Avatar
    Did it work now ilyasbaig?
    01-18-20 04:20 AM
  19. Hphv's Avatar
    no word of january update?
    02-08-20 05:14 AM
  20. conite's Avatar
    no word of january update?
    No sign. But as far as I can tell, TCL is in complete virus lockdown, and has been for a few weeks.
    02-08-20 10:39 AM

Similar Threads

  1. I sometimes look at a Key2 black dual SIM
    By mrsimon in forum BlackBerry KEY2
    Replies: 82
    Last Post: 02-19-20, 10:13 AM
  2. Well I took the plunge (Red Key2)
    By Apple Aya in forum BlackBerry KEY2
    Replies: 23
    Last Post: 01-23-20, 02:43 AM
  3. Does anyone have the 10.3.2.2888 autoloader for STL100-1?
    By NiloC10101 in forum BlackBerry Z10
    Replies: 5
    Last Post: 01-21-20, 11:19 PM
  4. Bought a used Key2 LE \ multiple keys have issues
    By ChrisBB2011 in forum BlackBerry KEY2 LE
    Replies: 1
    Last Post: 01-06-20, 10:37 AM
  5. bricked a Q5 while running autoloader
    By bbdoc54 in forum BlackBerry Q5
    Replies: 3
    Last Post: 01-04-20, 02:00 PM
LINK TO POST COPIED TO CLIPBOARD