1. conite's Avatar
    Here is the August patch for the KEY².

    As usual, this is NOT for Chinese, Russian, or Indian devices. Also, this will not work on any of the new EU variants that have a PRD ending in -5xx. Sorry, but only the common signatures are available.

    Remove device PIN/password, boot to bootloader screen, and run either flashall or flashallnowipe as per your preference.

    https://mega.nz/#!tUhARALB!yryD80jQB...TFcF-m3AQ5K1iU

    Full credit to the others too: jcrutchvt2010, mbirth, and thurask.
    Last edited by conite; 08-08-19 at 04:13 PM.
    08-08-19 03:24 PM
  2. RK_BB's Avatar
    Loaded, thank you.
    08-08-19 04:45 PM
  3. quybao's Avatar
    Sadly, my BBF100-6/PRD-63828-024 did not received any updates in July or August
    08-08-19 05:24 PM
  4. conite's Avatar
    Sadly, my BBF100-6/PRD-63828-024 did not received any updates in July or August
    You're in luck. That's what this thread is for.
    quybao likes this.
    08-08-19 08:25 PM
  5. quybao's Avatar
    You're in luck. That's what this thread is for.
    I am not fluent in autoload, will there an update via ota for bbf100-6/PRD-63828-024?
    08-08-19 08:40 PM
  6. RK_BB's Avatar
    Sadly, my BBF100-6/PRD-63828-024 did not received any updates in July or August
    Your latest official patch is ABX648 from June so you are good.
    quybao likes this.
    08-08-19 08:47 PM
  7. quybao's Avatar
    Your latest official patch is ABX648 from June so you are good.
    The ABX648 version has a big problem with battery drain. In addition, it has a lot of errors when typing Vietnamese, so i just hope to receive the patch.
    08-08-19 09:12 PM
  8. Mauri5io's Avatar
    Mine is EU but BBF100-1 PRD ending in 013
    I assume it works for mine or should I wait for OTA?
    Also, how do I install android autoloader? Only know how to do with BB10 thanks!
    08-09-19 06:20 PM
  9. conite's Avatar
    Mine is EU but BBF100-1 PRD ending in 013
    I assume it works for mine or should I wait for OTA?
    Also, how do I install android autoloader? Only know how to do with BB10 thanks!
    Yes it will work.

    You download to PC, unzip it, plug in your device (which is in fastboot mode), and run the batch file of your choice.

    To get into fastboot, turn off the phone. Then turn it back on by holding the power button and the down volume button. You will see a text menu. Stay there.

    Don't forget to remove your device password first.
    Mauri5io likes this.
    08-09-19 06:58 PM
  10. khoa_dg's Avatar
    The ABX648 version has a big problem with battery drain. In addition, it has a lot of errors when typing Vietnamese, so i just hope to receive the patch.
    The error of typing come from BlackBerry Keyboard, not from the patch.
    quybao likes this.
    08-10-19 12:20 AM
  11. takaharu_m's Avatar
    When autoloader is executed on Mac, the blue lamp blinks and does not start.
    The workaround is to fix Sh.
    After that, it will start by modifying it.
    (Both flashall.sh and flashallnowipe.sh)



    $ BIN / $ FASTBOOT oem switch-bootchain: $ {slot}
    $ BIN / $ FASTBOOT reboot bootloader
    sleep 10
    $ BIN / $ FASTBOOT flash bootsig $ IMG / boot.img.sig
    $ BIN / $ FASTBOOT flash recoverysig $ IMG / recovery.img.sig



    $ BIN / $ FASTBOOT flash system $ IMG / system.img
    $ BIN / $ FASTBOOT flash oem $ IMG / oem _ $ {read_dev} .img
    $ BIN / $ FASTBOOT reboot
    jcrutchvt2010 likes this.
    08-11-19 05:20 PM
  12. conite's Avatar
    When autoloader is executed on Mac, the blue lamp blinks and does not start.
    The workaround is to fix Sh.
    After that, it will start by modifying it.
    (Both flashall.sh and flashallnowipe.sh)



    $ BIN / $ FASTBOOT oem switch-bootchain: $ {slot}
    $ BIN / $ FASTBOOT reboot bootloader
    sleep 10
    $ BIN / $ FASTBOOT flash bootsig $ IMG / boot.img.sig
    $ BIN / $ FASTBOOT flash recoverysig $ IMG / recovery.img.sig



    $ BIN / $ FASTBOOT flash system $ IMG / system.img
    $ BIN / $ FASTBOOT flash oem $ IMG / oem _ $ {read_dev} .img
    $ BIN / $ FASTBOOT reboot
    Thank you. I will make those changes going forward. I often consider removing the Mac scripts because I don't have one to test them on.
    08-13-19 06:23 PM
  13. quybao's Avatar
    Hello guys
    Sorry if my English is not good to express.
    I wonder if my K2 BBF100-6 (PRD63828-024) runs this ACB168 autoloader, can I still get updates via OTA in the future or will I always have to run autoloaders?
    Thank you
    08-19-19 03:51 AM
  14. conite's Avatar
    Hello guys
    Sorry if my English is not good to express.
    I wonder if my K2 BBF100-6 (PRD63828-024) runs this ACB168 autoloader, can I still get updates via OTA in the future or will I always have to run autoloaders?
    Thank you
    If your variant otherwise gets this OS on its own, then you will still remain in sync.
    quybao likes this.
    08-19-19 07:00 AM
  15. quybao's Avatar
    If your variant otherwise gets this OS on its own, then you will still remain in sync.
    Conite, thank you very much.
    08-19-19 10:22 AM
  16. AladarMezga's Avatar
    Hi Guys

    Sorry to ask dumb question. First time I'm trying to use autoloader and I can't to seem to find any step by step guide.

    My understanding of the steps are:
    1. Download and unzip - autoloader (2GB)
    2. Connect Key2 to a computer
    3. Initiate Bootloader Menu
    4. Select option 3 - Reboot into fastboot (comes back to the original menu)
    5. Run with admin privileges - batch file - flashall.bat

    I've run that and my screen show the pic below....I can terminate the batch and also I tried to reboot to the fastboot nothing happened. Am I missing something?

    KEY2 ACB168 Autoloader (Aug patch)-2019-09-07_103526.png
    09-06-19 07:43 PM
  17. AladarMezga's Avatar
    I've tried couple options and nothing is happening.

    By inspection of the flashall.bat it has 3 loops to check device properties and after that complete it should prompt with Y/N question to continue.

    I'm still getting stuck on screen 'Please switch to fastboot mode by holding...'

    Any ideas?
    09-06-19 08:12 PM
  18. AladarMezga's Avatar
    I've tried couple options and nothing is happening.

    By inspection of the flashall.bat it has 3 loops to check device properties and after that complete it should prompt with Y/N question to continue.

    I'm still getting stuck on screen 'Please switch to fastboot mode by holding...'

    Any ideas?
    Ignore my messages above. I've resolved this issue.

    I tried to use work laptop and something must be blocking the script.
    Worked straight away with my home pc.

    Cheers
    A.
    09-06-19 08:51 PM
  19. conite's Avatar
    I've tried couple options and nothing is happening.

    By inspection of the flashall.bat it has 3 loops to check device properties and after that complete it should prompt with Y/N question to continue.

    I'm still getting stuck on screen 'Please switch to fastboot mode by holding...'

    Any ideas?
    You ARE in fastboot mode.
    09-07-19 08:58 AM
  20. conite's Avatar
    Ignore my messages above. I've resolved this issue.

    I tried to use work laptop and something must be blocking the script.
    Worked straight away with my home pc.

    Cheers
    A.
    Good news.
    givechanceachance likes this.
    09-07-19 08:58 AM
  21. gsm_amdadul's Avatar
    Blackberry key2 BBF100-4 Auto recovery mode
    Senior brothers asking for help

    ABP924,ABT974, ABE181Uni.7z, KEY2_ACQ160_univ,autoloaders!
    Flashing with these four versions doesn't work

    BlackBerry key2 is in automatic girl recovery mode. Flushing with four versions. No work. Same problem auto recovery mode
    08-05-20 07:36 AM
  22. conite's Avatar
    Blackberry key2 BBF100-4 Auto recovery mode
    Senior brothers asking for help

    ABP924,ABT974, ABE181Uni.7z, KEY2_ACQ160_univ,autoloaders!
    Flashing with these four versions doesn't work

    BlackBerry key2 is in automatic girl recovery mode. Flushing with four versions. No work. Same problem auto recovery mode
    No need to start a new thread. Answer is in the thread you created yesterday.
    08-05-20 08:30 AM
  23. Dunt Dunt Dunt's Avatar
    No need to start a new thread. Answer is in the thread you created yesterday.
    Clearly his Flushing Girl isn't Flashing....
    08-05-20 10:40 AM
  24. Grungni's Avatar
    The download link in the first post isn't working for me, says the file is no longer available?
    08-07-20 02:25 PM
  25. conite's Avatar
    The download link in the first post isn't working for me, says the file is no longer available?
    Well no, this OS is a year old now.
    Grungni likes this.
    08-07-20 08:06 PM
28 12

Similar Threads

  1. Key2 - transfer data/contacts/texts/photos from BB9350
    By Petroffd1 in forum General BlackBerry News, Discussion & Rumors
    Replies: 2
    Last Post: 08-19-19, 05:53 PM
  2. blackberry key2
    By X-Sym in forum Ask a Question
    Replies: 1
    Last Post: 08-19-19, 09:04 AM
  3. What Smart watch with LTE (Verizon) will work with Key2 LE
    By kadakn01 in forum BlackBerry KEY2 LE
    Replies: 5
    Last Post: 08-19-19, 07:57 AM
  4. Is BB10 getting a KNOB patch?
    By johnb_xp in forum BlackBerry 10 OS
    Replies: 3
    Last Post: 08-18-19, 02:08 PM
  5. KEY2 LE available from Vodafone in Spain
    By mrsimon in forum BlackBerry KEY2 LE
    Replies: 0
    Last Post: 08-18-19, 10:50 AM
LINK TO POST COPIED TO CLIPBOARD