02-03-20 10:05 AM
257 ... 23456 ...
tools
  1. Torbey's Avatar
    Original Genuine Leather Case & Silicone TPU Soft Back Cover for Blackberry Key2

    http://forums.crackberry.com/e?link=...token=3koFXuPh
    08-01-18 09:51 AM
  2. Torbey's Avatar
    08-01-18 10:09 AM
  3. Torbey's Avatar
    when buying stay away from ( USB-C 2.0 & 3.1 ), only use ( USB-C 3.0 )
    08-01-18 10:12 AM
  4. IvanTheTolerable's Avatar
    when buying stay away from ( USB-C 2.0 & 3.1 ), only use ( USB-C 3.0 )
    Doesn't the specs for the key2 say it uses USB C 2.0?
    08-01-18 02:25 PM
  5. herbersh's Avatar
    I purchased a BlackBerry PRIV leather holster and it fits very well. Looks great also.
    08-01-18 04:16 PM
  6. anon(10268214)'s Avatar
    Picked up a Tetded leather flip case (latch type) for my Key2 this week. Very well made, and it has a sleep magnet that works. Nice touch!
    the brother likes this.
    08-01-18 08:10 PM
  7. Torbey's Avatar
    No, the key2 comes with " QC 3.0 fast charging " , I have been using ( Anker ) for last couple of years, same performnce as original but with even better matrial for bending and so on .

    Note : Make sure that the adaptor or the car charger you are using is also QC3.0
    Last edited by Torbey; 08-02-18 at 08:13 AM.
    IvanTheTolerable likes this.
    08-02-18 05:48 AM
  8. KitJackson67's Avatar
    Note : Make sure that the adaptor or the car charger you are using is also QC3.0
    For those of us who are slightly less tech savvy, does that mean I cannot plug the new cable into the old adaptor (that gets plugged into the wall) I used to charge my Classic? What about portable chargers (the kind you carry with you and use on the go)? Like this one. https://mimoco.com/collections/mimop...-mimopowertube

    (I really wanted R2D2 or BB8 but they were sold out)
    08-02-18 10:11 AM
  9. Torbey's Avatar
    For those of us who are slightly less tech savvy, does that mean I cannot plug the new cable into the old adaptor (that gets plugged into the wall) I used to charge my Classic? What about portable chargers (the kind you carry with you and use on the go)? Like this one. https://mimoco.com/collections/mimop...-mimopowertube

    (I really wanted R2D2 or BB8 but they were sold out)
    To get quickcharge 3.0 on your key2 :

    Make sure of two things :

    1- The adaptor/ car charger / portable charger should be QC3.0 ( below exmaples for each )

    QC3.0 Adaptor : Anker Wall Charger
    https://www.amazon.com/dp/B077HFFLMS...UvbUpU13249396

    QC3.0 Car charger : Anker 39W Dual USB Car Charger
    https://www.amazon.com/dp/B01K9MQ8WW...UvbUpU13249396

    QC3.0 Power bank : Anker PowerCore


    https://www.amazon.com/dp/B01JIYWUBA...UvbUpU13249396

    2- Cable used is also QC 3.0 ( below exmaple )
    https://www.amazon.com/dp/B0791W4G1Y...UvbUpU13249396


    Please note : the key2 comes with QC3.0 adpator and cables in the box ( not like the iphone x ) .

    Hope i helped
    HershL likes this.
    08-03-18 02:53 AM
  10. SV_Trinity's Avatar
    Will keep my fingers crossed, but feel confident. Wouldn't have posted review if I wasn't satisfied, especially since I was not pleased with what I first ordered.
    Got a hold of a SUPERSHIELDZ tempered glass protector ... Fits nicely as you indicated, and looks great !!! Like how they handle the capacitive buttons. Thanks for the recommendation, @burbunny !!!
    burbunny likes this.
    08-03-18 07:05 AM
  11. idees's Avatar
    Soft Shell case is out of stock again
    I wanted to order it with thw device together.
    Why again?...
    08-03-18 09:11 AM
  12. the brother's Avatar
    Picked up a Tetded leather flip case (latch type) for my Key2 this week. Very well made, and it has a sleep magnet that works. Nice touch!
    I love their cases. Have one on my KEYᴼᴺᴱ right now! Can you share a pic?
    08-03-18 09:25 AM
  13. burbunny's Avatar
    Got a hold of a SUPERSHIELDZ tempered glass protector ... Fits nicely as you indicated, and looks great !!! Like how they handle the capacitive buttons. Thanks for the recommendation, @burbunny !!!
    My pleasure @SV_Trinity! I couldn't be more pleased with mine, and glad you found the recommendation helpful. To me, the SuperShieldz disappears on the BB and makes it look like it just came that way.
    08-03-18 10:17 AM
  14. anon(10268214)'s Avatar
    I love their cases. Have one on my KEYᴼᴺᴱ right now! Can you share a pic?
    Sure...here you go.
    08-03-18 05:31 PM
  15. rjedge54's Avatar
    We need the OEM. Blackberry cases here in the states! Can't find them anywhere only over seas.
    They are available from http://www.blueshop.ca/blackberry-oe...4A54A28508.htm in Quebec Canada. Mine arrived today after ordering a couple of days ago. I'm sending mine back for a refund (especially since it is $45 CAD) only because it doesn't work with the Spigen Pop ring I also have. The 3M adhesive used does not stick to the surface of the OEM case. It is a good quality case, certainly stiffer than the cheaper TopAce TPU case I had been using. They also added ridges to the power button like the original and it has all the appropriate openings for full access as I would expect. The OEM soft shell however makes the silver Key² look too much like the black version except for the Key board frets and chin. The BlackBerry logo on the back is also black but embossed so it can be felt but not easily seen except in certain light. The OEM soft shell also feels a little more slippery than the TPU case but that may be a subjective opinion

    Two advantages to the cheaper TopAce soft shell is that the Spigen Pop ring which I am really getting to like adheres very well. The other advantage is that the TopAce clear soft shell also shows of the silver version better and even the diamond pattern of the rear cover is clearly visible.

    Neither of the two soft shell cases allow the Key² to fit in the Dtek 60 holster BTW. I don't know about others.

    Richard

    Sent from my BlackBerry Key² (BBF100-2) | Android 8.1.0
    Last edited by rjedge54; 08-04-18 at 11:18 AM.
    the brother and stephenabm like this.
    08-03-18 07:47 PM
  16. mhw100's Avatar
    Just installed and customized my BLACKBERRY OEM Leather FlipCase (from Blueshop.ca) ... It FEELS very rich and luxurious .... But this could be a bad thing .... I keep accidentally touching the camera lens as I'm feeling the leather's texture.
    .
    Attachment 438546
    .
    The side buttons are NOT "sealed" covered, they are cutouts with "tab flaps" that cover the buttons. (Power button is ridged to distinguish from other buttons).
    Attachment 438547
    .
    Earphone rubber plug NOT included.
    Attachment 438548
    .
    Spearker/Mic "grills" and WSKEN magnetic USB-C plug NOT included.
    Attachment 438549
    .
    Attachment 438550
    .
    Attachment 438551
    The back BB logo is embossed into the leather, while front BB logo is a plastic?metal? disc that is adhered to the surface. The front BB logo has mystical powers, as others have reported as well.

    Awaiting arrival of tempered glass screen protector. I've already been shorted $6 by Amazon.com ... NO product received, and refund shorted. Currently just using a custom Monoprice screen protector made with Cricut.
    What is the trick to getting the phone out of the case? It's so stiff it's difficult to remove and I'm afraid I will bend or scratch the phone.
    08-03-18 11:22 PM
  17. gallopiton's Avatar
    08-03-18 11:25 PM
  18. anon(10268214)'s Avatar
    hey there... how's the typing experience with this kind of cases on? how much weight and bulkiness is added? thanks in advance!
    The amount of bulk added is very minimal...its as thin or thinner than most shells out there. And Tetded always uses real leather.

    Typing is very comfortable. When you flip the cover back to type it doesn't slide around at all. The microfiber lining is grippy.

    Personally I prefer this type of flip case because it is very thin (no additional card slots, exposes buttons and frame enough to protect but still appreciate the design) and most importantly the clasp keeps the lid closed in your pocket...no fear of key scratches etc. on the screen.

    From a purely functional standpoint I still prefer the phone naked in a holster...but there are times one needs something a little more inconspicuous, such as when wearing a suit, a night out, etc.
    the brother likes this.
    08-04-18 08:29 AM
  19. jgcotton's Avatar
    Great combination holster and gel cover for Key2...
    Amazon just delivered a Texture 6" Vertical Swivel Belt Clip Holster Case and my Black Key2 on AT&T in a TopACE TPU Rubber Gel Shock-Absorption Bumper Anti-Scratch Transparent Silicone Cover fits inside perfectly...excellent protection for the best BB yet...the Key2!

    https://www.amazon.com/Texture-Genui...UvbUpU13250208

    https://www.amazon.com/BlackBerry-To...UvbUpU13250208
    08-04-18 03:50 PM
  20. KitJackson67's Avatar
    I think I've figured out what I'm getting, but someone else suggested a poll, and I liked the idea. I thought it was a good idea because it might make it easier to see at a glance what most people on CrackBerry recommend.

    https://forums.crackberry.com/blackb.../#post13250165

    Thanks to all of the wonderful CrackBerry users in the forms who make it easier to have a BlackBerry. I don't what I'd do without you.
    08-06-18 12:35 AM
  21. johnnydoesai's Avatar
    Is it slamboy certified?
    THIS. lol
    08-06-18 01:49 AM
  22. supermanofsteel's Avatar
    A lot of people here seem to really like clear cases. Can anyone show me why? (I.E. SEND ME YOUR PICS!)
    the brother likes this.
    08-06-18 08:33 PM
  23. supermanofsteel's Avatar
    I ordered TUDIA Merge and it's on it's way, but here's the bad news I got from the seller:

    Also, did anyone order Pushinmei TPU case? Is it any good?https://uploads.tapatalk-cdn.com/201...b4807dc2e6.jpg


    Can you keep us updated on this? I actually really love the design of the Tudia case and I'd like to purchase it once it's been fixed.
    Last edited by supermanofsteel; 08-06-18 at 10:34 PM.
    08-06-18 09:00 PM
  24. Nathalie S's Avatar
    Hi everyone,


    I ordered my BlackBerry Key2 a couple of days ago (was waiting for the 128Gb version to be released in Europe), and of course I started looking at cases right away. I love pouches, as they allow me to use the device without any extra bulk while showing off the phone as it's meant to be shown off. So I thought I'd mention in this thread this lovely online store I stumbled upon: https://happerstudio.com/. (Nothing on Amazon was good enough and I cannot wait to see if BlackBerry decides to release (or not) a pouch for the Key2, as I need to protect my phone now!) Happer Studio is also on Etsy (in fact, it's their payment platform) and there are hundreds of positive reviews. I have literally just ordered one, and I am having it customized with my name on it. I read someone had theirs customized with some sort of Apple branding, so I guess the same could be done with BlackBerry... I asked if they could add a hole like on previous original BB pouches to show the red light, but it's not possible for technical reasons. The pouches are not cheap but look great and like they would pass the test of time.

    I also found this other option: https://www.etsy.com/fr/shop/phocket...hopheader-name, although I prefer the leather look.

    Hopefully, this will be of use to some of you.
    08-07-18 05:08 AM
  25. RK_BB's Avatar
    Hi everyone,


    I ordered my BlackBerry Key2 a couple of days ago (was waiting for the 128Gb version to be released in Europe), and of course I started looking at cases right away. I love pouches, as they allow me to use the device without any extra bulk while showing off the phone as it's meant to be shown off. So I thought I'd mention in this thread this lovely online store I stumbled upon: https://happerstudio.com/. (Nothing on Amazon was good enough and I cannot wait to see if BlackBerry decides to release (or not) a pouch for the Key2, as I need to protect my phone now!) Happer Studio is also on Etsy (in fact, it's their payment platform) and there are hundreds of positive reviews. I have literally just ordered one, and I am having it customized with my name on it. I read someone had theirs customized with some sort of Apple branding, so I guess the same could be done with BlackBerry... I asked if they could add a hole like on previous original BB pouches to show the red light, but it's not possible for technical reasons. The pouches are not cheap but look great and like they would pass the test of time.

    I also found this other option: https://www.etsy.com/fr/shop/phocket...hopheader-name, although I prefer the leather look.

    Hopefully, this will be of use to some of you.
    Which one did you order for the KEY²? Doesn't seem like they make one specifically.
    08-07-18 09:42 AM
257 ... 23456 ...

Similar Threads

  1. No Incipio Case
    By tickerguy in forum BlackBerry KEY2
    Replies: 16
    Last Post: 07-18-18, 09:03 PM
  2. Any APK for Blackberry 10 Classic Music app for Android
    By azum4u in forum BlackBerry KEYone
    Replies: 23
    Last Post: 07-18-18, 01:04 AM
  3. Key2 secure boot?
    By Dimwit Flathead in forum Ask Bla1ze
    Replies: 2
    Last Post: 07-13-18, 04:28 PM
  4. How to migrate from BB10 to non-BlackBerry Android?
    By DC_Portugal in forum Ask a Question
    Replies: 1
    Last Post: 07-13-18, 02:00 PM
  5. Memory Stick for key2 advice? Any brands recommended?
    By Radmd74 in forum BlackBerry KEY2
    Replies: 3
    Last Post: 07-13-18, 12:43 PM
LINK TO POST COPIED TO CLIPBOARD