Thanks Conite. It worked like a charm!!!
Printable View
Thanks Conite. It worked like a charm!!!
I will put the instructions a bit more detailed for the people who don't have any experience with autoloaders (like me).
1) Download the link : https://androidfilehost.com/?fid=1395089523397941053 (3 GB).
2) Unzip the file
3) Go to screenlock in settings --> chose : none
4) Switch off your phone
5) Boot into bootloader menu (press power key and volume down and keep holding till you reached the bootloader menu)
6) Now connect your device with your pc (USB cable)
7) Click Flashall or Flashall_nowipe on your pc
8) Then the following message appears "Note: if device is not in fastboot mode
Please switch to fastboot mode by holding the power and volume down key for 30s
This script will wipe off all user data. Do you want to continue? [y/n]"
Click Y!
9) let the file run till its done (takes about 5 minutes). The phone will automatically restart with ABT974.
10) All is done!
Note : when you chose flashall_nowipe, it will still mention "This script will WIPE OFF all user data. Do you want to continue? [y/n]" Just chose Y, it will not wipe your data.
By the way is there any chance for future patches for India (after the april 2019 patch)?
Unlikely.
hello, have you managed to update without deleting the information?
If you kept reading, the answer was yes.
Thanks so much for this. I have a BBF100-6 (India version) and this worked like a charm.
One (small) issue; GooglePay now says "Your phone can't make contactless payments" in particular says "Your phone doesn't meet software standards. You can't pay contactless with this device. It may be rooted, or running uncertified software." Google Pay for paying on-line still works fine.
I have never found contactless payment through my phone to be anything more than a curiosity, so I am not bothered by this, but did I want to note it for others.
It says that because that particular software build wasn't certified for your area, which is not surprising.
Hello, conite. I have 3 questions for you.
1. If I update my Indian key2 using this autoloader, could I revert back then to the official and latest ABN088? If yes, how?
2. What is the latest autoloader suitable with Indian device `APBI-PRD63828031`? I appreciate the link.
3. Is there really no way to leave Google Pay working after autoloader update?
1. Sure. Autoloader is available.
2. This is the latest.
3. No.
I haven't been on this forum for a few months. Is there any new recent patch? :)
For which device PRD?
BBF100-6
It's the PRD I need. Type *#837837# into the phone dialer.
Anyway to create ACQ160 all variants like this, sir?
My key2 is chinese version and I wanna autoload an international rom like this...my key2 updated ota to acq160 @@
You can't do that. Chinese variant gets Chinese software. ACQ160 for China:
https://mega.nz/file/ABwTTb7a#LPOdZg...qlDVHdjkdCLF3A
The autoloader in this thread just has them all installable from the same file.
Good evening, gents!
Tried to clarify myself reading a lot of posts here but unsucesfully I am not clarified whether or not do I have to use the autoloader AB 974.7 z in order to make my phone to switch on as it is remains stuck on opening screen, i.e. Blackberry Powered by Android".
The only thing I can do now is to open the BootLoader Menu and to find out the BSN and IMEI numbers...
I have a dual sim Blackberry Key 2 // BBF 100-6 // My PRD is 63828-031
Can you please advise/help me? Thank you kindly in advance for your help/assistance!
This is the correct autoloader for your device - unless you use Google PAY, in which case you should stick to your stock OS.
Many thanks for your quick answer, tried but unsucesufully, I am now downloading the APN 088, as per the below https://forums.crackberry.com/showth...1#post13344155
ABT works fine and has been loaded by your variant hundreds of times.
Define "tried but unsuccessfully".
Thank you for your msg above.
Pls kindly note that all are "Okay" during the process of installation, at the end is also mention "rebooting", but only after abt 2-3 minutes is rebooting and "the square, circle, triangle" are still moving at least for 10 min on the screen with no finish. And when finish, the device returns to Boot Loader Mode or to "Blackberry... Powered by Andoid".
Did you use the flashall.bat? In other words, did you use the wipe option?
Yes, flashall.bat. I just Did id again, same situation but faster returned after instalation completed to "Bootloader Menu", in abt 4-5 minutes.
Finished. Total time: 287.740s, Sending 'oem' (63868 KB) OKAY [1.469s], Writing 'oem' OKAY [0.016s], Finished. Total time: 5.734s, Rebooting OKAY [0.125s]
Finished. Total time: 0.125s, Press any key to close this window
The whole flashing procedure should take at least 2 minutes. If not, you have a connection problem.
Trying a different (newer/better) USB cable is an excellent idea - some very strange issues (particularly with Android Auto for instance) have been caused with a poor cable.