1. timbales1's Avatar
    Does anyone know if I can use the screws from a 8320 will fit in 8900. One is a T5 and the other T6. The 8900 screw is stripped. Any suggestions on how to get it out?
    11-01-09 09:39 PM
  2. Bajanbastard's Avatar
    IRCC the 8320 used both T5 and T6 screws. The 8900 uses T6 only. Good luck gettin that stripped screw out though i would love a solution myself.
    11-01-09 09:44 PM
  3. Shine4JC's Avatar
    You could try removing the screw with a small flat blade/regular screwdriver (eyeglass size). There should be enough teeth on the stripped Torx screw to allow it to bite into it.

    Posted from my CrackBerry at wapforums.crackberry.com
    11-01-09 10:11 PM
  4. NorrisCell's Avatar
    You could try removing the screw with a small flat blade/regular screwdriver (eyeglass size). There should be enough teeth on the stripped Torx screw to allow it to bite into it.

    Posted from my CrackBerry at wapforums.crackberry.com
    This is good advice. I doubt they make an easy-out set small enough for it otherwise. I've used an eyeglass repair kit to do it before, with decent success rates
    11-02-09 12:45 AM
LINK TO POST COPIED TO CLIPBOARD