1. billydavis224's Avatar
    i have recently repaired my blackberry after it having a broken lcd display, i dismantled the phone an i replaced the lcd display, i put the phone back together but now the screen will not show although the keypad does light up when powered om, could anyone help me?
    many thanks , i have not tried any form of safemode, is this a problem with the way i fitted it? also the red light on top of the blackberry actually shows up red,before powering on
    02-22-13 09:00 AM
  2. Berry_Pink's Avatar
    do the numbers match on the back of both lcd screens?
    02-22-13 09:31 AM
  3. billydavis224's Avatar
    im not sure ive only changed the lcd digitilzer the screen lights up now, but no picture, and the red light stays on and does not turn off
    thankyou for your reply
    02-22-13 09:50 AM
  4. billydavis224's Avatar
    are the numbers on the ribbon?
    02-22-13 09:54 AM
  5. eddy_berry's Avatar
    Happened to me a while back on an old 8900. Dissassemble and check connections again. That's what I did and it worked. The screen connector was not seated properly but looked perfectly fine. Push lightly and wiggle it slightly once it is seated. I hope the connector didn't get damaged or anything. Careful and good luck.
    02-22-13 09:58 AM
  6. billydavis224's Avatar
    ive lost a screw will this make a differnce?
    02-22-13 10:16 AM
  7. PALeafs67's Avatar
    If a screw is missing.. press down lightly on the screen when your device is powered up,i know when i was doing repairs on other BBs just to check them that was a issue the screen has to be secured to the main board to work properly.
    02-22-13 11:57 AM
  8. billydavis224's Avatar
    it seems secure, i now haveno light coming from the lcd display shall i just buy a whole new lcd display or isit somehthing to do with my motherboard now
    02-22-13 02:33 PM
  9. alannd's Avatar
    did you manage to get your display working in the end?

    I'm going to have another go at assembly and see if this works after pushing everything in a little tighter.

    I was just wondering if that worked for you?
    03-07-13 07:04 AM
  10. Krack-Berri's Avatar
    i just changed mine a few days back. every time i would put some pressure into screwing in the screws the screen would blank out, it was working fine and when i changed the back chasis plate, something happened after that, the screen would go blank if i pressed the back with a bit of pressure,, so yeah it does need to touch somewhere properly, not sure where though lol..
    03-07-13 04:45 PM
  11. Krack-Berri's Avatar
    becareful not to over do the screws, as the chasis screw thingys (holes or whatever you call them) wear in and you could end up with the screw turning and turning forever
    03-07-13 04:46 PM
  12. ifraser's Avatar
    From your description I would out my bets on the wrong screen number. The 9900 has 2 different ones. Bit like the 9700 also used to.

    Take the old screen and look at the back. It will have 001 or 002 at the end of the number.

    If you don't have the old one then you may just have to get the other model than u have.

    Posted via CB10
    03-07-13 07:32 PM

Similar Threads

  1. Home Screen Changed on 9900
    By arevirnor in forum BlackBerry Bold Series
    Replies: 1
    Last Post: 09-15-11, 12:13 PM
  2. How to change MENU list display to ICON list display on the screen?
    By ICJ in forum General BlackBerry News, Discussion & Rumors
    Replies: 0
    Last Post: 06-20-11, 11:16 PM
  3. Changing Icons / Apps that display on main screen
    By Just2Easy in forum General BlackBerry News, Discussion & Rumors
    Replies: 5
    Last Post: 05-24-09, 09:44 PM
  4. Changing Icons / Apps that display on main screen
    By Just2Easy in forum BlackBerry OS Apps
    Replies: 5
    Last Post: 05-24-09, 09:44 PM
  5. Replies: 9
    Last Post: 10-31-07, 03:29 AM