[madh263362]

Today I switched off my Z30 and connect to my PC for charging, strange it started booting/ switch on, how to get out of this issue?

Z30STA100-2, 10.3.2.2252

[kdhingra307]

its not issue
have never tried it switched off to pc but the same happens with android too

so currently not an issue

[robsteve]

The OS10 phones and PlayBooks use the operating system to run the charge controller. This means for it to charge, the OS has to be running.

[danp2000]

The OS10 phones and PlayBooks use the operating system to run the charge controller. This means for it to charge, the OS has to be running.

That didn't make sense.

It has been my experience that any BB10 phone will boot, if switched off, when you connect it to a charger.

T-Mobile  вιaсĸвεггч� Passport � Autoloaded 10.3.1.2582 Sachesi up to 10.3.1.2744 to 2.680 to 2.798 to 2.2204

[QWKSNKE]

Pretty much any smartphone performs a boot when plugged in to a computer.

Hell my iphone (work) boots when you plug it into the wall

STL-4. 10.3.1.2726

[madh263362]

If it boots how can I perform sic multiwipe on my device

Z30STA100-2, 10.3.2.2252

[Sator]

If it boots how can I perform sic multiwipe on my device

Z30STA100-2, 10.3.2.2252

First, connect your phone to your PC, turn off your phone, run/click SIC multiwipe and then turn your phone back on, SIC will continue the wiping process....

Sent from my Passport using Tapatalk

[madh263362]

First, connect your phone to your PC, turn off your phone, run/click SIC multiwipe and then turn your phone back on, SIC will continue the wiping process....

Sent from my Passport using Tapatalk

Thank u,

Z30STA100-2, 10.3.2.2252

[mrjmc99]

If it boots how can I perform sic multiwipe on my device

Z30STA100-2, 10.3.2.2252

Why do you need a sic wipe? regular autoloader wipes work just fine. I've used both, no difference.

Z30STA100-3/10.3.2.2252

[shorski]

No matter what you do, I believe you will still experience the issue.
This is my finding on this issue.
When your device is below 20% and you power it off to charge, it will switch on by itself but if it is above 20%, you won't have this issue.
So if you can confirm that the battery is below 20% when you experience this issue, then let it charge to above 20% before powering off.
If this is not so, then you can go ahead and do what others have said.

Z30STA100-2/10.3.BLACKBERRY

[madh263362]

Thank u all, my battery was above 20%, now I performed a sic wipe as suggested by u all, thanks for every one. Actually I bought new z30, it came with preloaded 10.2.1, I upgraded to directly to 10.3.2, and feel bit laggy and performed sic wipe and reload the os and find it snappy now, thank u all.

Posted via CB10