Thoughts anyone?
I have tried all and latest ones are poor. I have rolled back to earlier build for this OS and connection is poor
It was always stronger when I was on 10.2
Q10 - 10.3.1.1151
Printable View
Thoughts anyone?
I have tried all and latest ones are poor. I have rolled back to earlier build for this OS and connection is poor
It was always stronger when I was on 10.2
Q10 - 10.3.1.1151
The 10.3.1.996 radio from the 10.3.1.997 DEV OS was the best for me
Posted via CB10
939 for me on Verizon in central Florida, I also use a network extender at my house, which seems to complicate things, I have not tried 996 yet, I've heard good things about it, maybe I'll get to that today.
Z30STA100-3/10.3.1.1154
Cheers, have installed the 10.3.1.996 radio will try it out.
Q10 - 10.3.1.1151
Works better than any other 10.3.1 radio for me on my Q5
Posted via CB10
Hi. Where do I find this radio file? If you could let me know that would be most appreciated. If have done a search but have not found it.
would I simply install as I would an autoloader?
Thanks
http://forums.crackberry.com/showthread.php?t=943672
Yes it's a non destructive auto loader, should be 50-60mb or less depending on your device
Z30STA100-3/10.3.1.1154
Thanks. I have a z10 stl-2
Posted via CB10
Anyone have the radio in a .bar file? My wife is away with her PC and can't install the autoloader cause I have a Mac. Looking for Z10 STL100-3
Posted via CB10
Radio 996 as found 1152 wanting.
Went to 1154/1155, but unsatisfied.
Reverted to 996 over 1154 (1151 apps plus extra bars from 1133).
Posted via CB10
Z10-STL2-3-4 10.3.1.939
https://mega.co.nz/#!c1wjjRDT!Gvt7LD...JUoY7YyU_Hmnnk
Z30STA100-3/10.3.1.1154
Btw, faced one problem through both on Z10 and Q10.
When I autoloader installed the radios, the device started showing 2 red flashing leds.
First time on Q10, I Re flashed full autoloader to revive d device.
Second time on Z10, I got 2 flashing red leds again with only radio autoloader. I didn't wanna lose the data or go through reinstall of all apps as it is the daily driver.
So I made an autoloader with Darcys latest tools from only the bars nd signed radio (1154 + 996) and flashed it.
Device revived non destructively.
Anyone else faces this problem of getting 2 flashing red leds by autoloading only Radio exe files.
Posted via CB10
Mine went smoothly in my Z10. No problem here. Thanks for all the help.
Posted via CB10
Installed with ease on my Q10 using the autoloader
Q10 - 10.3.1.1151
There is an order of events that causes this, I can't remember exactly what it was, but resolving it with the core os autoloader is the only fix, glad you figured it out
Z30STA100-3/10.3.1.1154
the best I have found for me is 10.3.0.1053
?
Z30sta100-3/10.3.1.1154
i had that problem to. But when you have the signed bar file of the core OS you can make an autoloader of that file. Run the autoloader you created and everything whent fine.
1016 was best for me so far in Canada
1151 was just a battery drain
Because some seem to have very good results here with Radio 996 I decided to load it over the radio 1155. Although radio 1155 gave better results for me than 1017 radio (radio1152 gave the same results as 1155), the mobile signal was sometimes gone when i was driving with the car. Especially when I was driving in rural areas.
I'm going to see what results I have tomorrow with Radio 996 and let you know here when an appreciable difference is observed.
Edit : So the first day with the 996 radio and i can confirm, i have had not one mobile signal drop. in my opinion a much better radio than in 1155. iI must say that i never had signal drops on wifi.
Can anyone post radio bar file 996 for Z30? I tried to create autoloader only for radio from Dbb tools but my z30 got bricked.
https://drive.bitcasa.com/send/6tMMp...3dTocYhTwQn6io
these are all autoloaders posted but if you ahve sachesi and try to autoload it does cause a brick... (i JUST went thru it, but repaired by autoloading the same Coreos+ radio) and then reinstalled the radio and it worked
What core os do you need? I probably have it.
Z30STA100-3/10.3.1.1154
Was expecting to soft brick loading the 996 radio after a sachesi non destructive update to 1154, but did not need to reload the core. It booted up fine. Will see how my battery life is tomorrow. 1155 did not meet my expectations. Z30 STA 5
Posted via CB10
For who ask the link, please read #7 in this topic. He posted the link already.