[yessuz]

Thanks, so if i want this i have to loose my androids apps data :'( I will wait to see if this update worth it.

if you update via Sachesi or OTA - all data and apps (including android ones) stays in tact and untouched

[Pdinos3]

Any way to update my STL100-2 without destroying my data?

Hard to believe a Leafs fan agreeing with habsfan but I agree with him. But if you're scuuured you can look up how to update non destructively using sachesi. I'm sure Thurask has posted what to do. Take a look

Via CB Rockin Rogers Z30STA100-5/10.2.1.2141 /2142 Radio

[yessuz]

guys, two questions:

a) what's new in it comparing to 10.2.1.2102?

b) if i'm with stl100-2 - can I update this TMO update.... and is it worth if I'm on 10.2.1.2102?!

[bobshine]

What's the radio version in the TMo update?

Posted via CB10

[thurask]

guys, two questions:

a) what's new in it comparing to 10.2.1.2102?

b) if i'm with stl100-2 - can I update this TMO update.... and is it worth if I'm on 10.2.1.2102?!

a) Check second post in thread.

b) You can use the STL100-3 files (Country 310, Carrier 260, Device STL100-3) to upgrade your STL100-2. Is it worth it? If you have the time, why not?

What's the radio version in the TMo update?

Posted via CB10

10.2.1.2229

[Cross]

Was that a yes for my question then?

Posted via CB10

[trigger1074]

Looks like I did a quick reply instead of a reply with quote to your question. Yes, Wi-Fi Calling works post official T-Mobile USA Update.

great news. I looked in BBW and a couple people said in comments that it worked. I cant wait to get home and update.

[IgotsThis]

Attachment 254884

Mmm you might have a hemorrhage after that face palm. You might wanna have that checked out....

Posted via CB10

[thurask]

Was that a yes for my question then?

Posted via CB10

Yes, you can install this with either the Q10 autoloader or Sachesi.

Posted via CB10

[thurask]

Posted via CB10

[hennesseystealth]

hmmm, Wi-Fi Calling says OTA failed. Everything else seems to be correct. Any suggestions.

EDIT: did an uninstall and reinstalled from BBW...still get OTA failed message. Is there a newer version of Wi-Fi calling than 10.1.1.127 on BBW?

[JamieWilson01]

Attachment 254905
Working well on a VZW device...so far.

Posted via CB10

Autoloader or sachesi.


Via CB10 from Scotland while pretty stoned using Z10STL100-2/10.2.1.2141.

[mu57afa]

ooooo goodie! thanks thurask! was going to reload 2142 due to poor battery but hopefully this will do the trick, time for a full wipe and clean install

[horyel]

a) Check second post in thread.

b) You can use the STL100-3 files (Country 310, Carrier 260, Device STL100-3) to upgrade your STL100-2. Is it worth it? If you have the time, why not?



10.2.1.2229

Sorry for my ignorance Thurask but, there is no issue if i use the STL100-3 files to update my STL100-2? Do i need to make any change on the files?

Thanks for all the help!

[Omnitech]

Unlike 1926, you can actually download the STL100-4 radio bar and load that instead of the STL100-2/3 bar. Download bars, delete other radio, use this one instead:

[link shortened]/qc8960.omadm-10.2.1.2229-nto+armle-v7+signed.bar

Thanks for the link. I'm always too lazy to look those URLs up.

I don't know if it was the radio file or what, but my STL100-4 didn't like the OS file. Loaded the radio fine, about 30% through loading the OS file it restarted and reverted to previous.

Will try this radio file and see what happens.

[i_hiker]

Autoloader or sachesi.
.

Via CB10 from Scotland while pretty stoned using Z10STL100-2/10.2.1.2141.

Sachesi....for now

Posted via CB10

[Omnitech]

just wondering, is it worth to update 10.2.1.2102 to this?? or I will get nothing new??!

is emoji support here yet???

a) what's new in it comparing to 10.2.1.2102?

b) if i'm with stl100-2 - can I update this TMO update.... and is it worth if I'm on 10.2.1.2102?!

I'm compiling a changelog on the thread linked below. Those of you who have it running and who have noticed some strong evidence of changes, I encourage you to contribute:

http://forums.crackberry.com/bb10-leaked-beta-os-f395/os-10-2-1-2228-changelog-fixes-discoveries-914616/

[thurask]

Sorry for my ignorance Thurask but, there is no issue if i use the STL100-3 files to update my STL100-2? Do i need to make any change on the files?

Thanks for all the help!

The files are the same, although I don't think you need to load the T-Mobile WiFi Calling bar file.

Posted via CB10

[dakid72]

I already did the download, backing up now before I restart to let it finish the install to be on the safe side.
This funny to see T-Mobile have something out there that everybody wants when they were one of the last to "officially" update to 10.2.1

Thank You T-Mobile for sending this update out and I hope wifi-calling works once I get it done with the back-up

Will update this post when I get done backing up and a restart

*fingers-crossed*

[i_hiker]

I'm compiling a changelog on the thread linked below. Those of you who have it running and who have noticed some strong evidence of changes, I encourage you to contribute:

http://forums.crackberry.com/bb10-le...veries-914616/

First fix...get change log title corrected from 2288 to 2228.
Thanks for putting the change log together...it's a big job.
On VZW the LTE signal strength seems a little weak. Got to make a dash for the airport....

[DLewis13]

The files are the same, although I don't think you need to load the T-Mobile WiFi Calling bar file.

Posted via CB10

Deleted the My T-Mobile application also. Didn't think about removing files before installing. Thanks again, up and running on Verizon Z10, with Porsche clock sideloaded. All well and good.

[karaya1]

First version of 10.2.1 to pop up for my q10 on Vodafone.cz.

[tinno]

Go right ahead.



They're the same thing. Software version vs OS version.



There is no dedicated STL100-1 download URL yet, so do the following:

Download either of the Q10/STL100-3 file sets, then once it's all downloaded, delete qc8960.factory_sfi-10.2.1.2141-nto+armle-v7+signed.bar (both models) and qc8960.wtr-10.2.1.2229-nto+armle-v7+signed.bar (Q10) or qc8960-10.2.1.2229-nto+armle-v7+signed.bar (STL100-3).

Download these files, put them with the rest of the OS and load as usual:

http://cdn.fs.sl.blackberry.com/fs/qnx/production/0b7f38a72a6c47d62e2735027762d50fd3ae3abe/com.qnx.coreos.qcfm.os.factory/10.2.1.2228/winchester.factory_sfi-10.2.1.2228-nto+armle-v7+signed.bar

http://cdn.fs.sl.blackberry.com/fs/qnx/production/0b7f38a72a6c47d62e2735027762d50fd3ae3abe/com.qnx.qcfm.radio.m5730/10.2.1.2229/m5730-10.2.1.2229-nto+armle-v7+signed.bar

Thanks a lot thurask, works like a charm on STL-1

[tomsobon]

or

Device: Q10
Variant: SQN 100-5


a quick question, I have a SQN 100-3, can i load the SQN 100-5 version?

thanks a lot

[Doggerz]

My phone is updating by going to check for updates. OTA.


Posted via CB10