[Zeeshan Ali7]

It's your call. You may update or just ignore.
The 811mb is just for updated apps, core os and radio.

Thanks for the information

Red passport

[Old_Mil]

10.3.3.1435 just downloaded...811 meg update...I am guessing that is what you are seeing.

[HaberNik]

I have not downloaded yet, as I will let others see the impact first (positive or negative) . After the first 10.3.3, I have not found issues, so don't want to fix what isn't broken

Posted via CB10

[Old_Mil]

The only issue I have had is that an android app I use for work can no longer connect to the server. That broke with 10.3.3 and has not been fixed by 10.3.3.1435.

Otherwise everything works fine.

[HaberNik]

Thanks, I use some Android apps for fun and necessity (read Starbucks, and then count how many times I forget my wallet but can simply use the app to pay!)

If it breaks, I finally go blackdroid!

Priorities right?

Posted via CB10

[RicFr]

The only issue I have had is that an android app I use for work can no longer connect to the server. That broke with 10.3.3 and has not been fixed by 10.3.3.1435.

Otherwise everything works fine.

Same here.

Posted via CB10

[hvacdon]

Anyone else having issues with in-app purchases?

I am using the Fongo voip app and had an issue with the in-app "remove ads" purchase procedure. I had originally purchased "remove ads" in a prior BB10 version. After updating to 10.3.3, wiping device and reinstall of Fongo app, restore of "remove ads" would not work.

I contacted the Fongo support site, and while helpful, did not have a solution and had not received any other complaints.

I was able to correct the issue by side loading a .bar for "sys.paymentsystem" 10.3.2 using Sachesi to replace the 10.3.3 version. After installation of the 10.3.2 version, the remove ads suppression worked immediately.

I am not sure if this is a Fongo/BlackBerry issue or if there are larger issues with revised version of the payment system.

[moyah8]

OK.. so I've updated this on my Passport and the first thing that I notice is the keyboard light comes on then fades out.

I also cannot receive calls. I've installed via a autoloader that I created using the debrick and radio (via Darcy tools).

Am I alone with my problems?

Posted via CB10 on PassportSQW100-4/10.3.3.2163

[anikelaiya]

Thanks for the information

Red passport

I just got It too over OTA...

Posted via CB10 from BlackBerry Passport on 10.3.3.2163 thru Airtel India SQW 100-1

[thurask]

I also cannot receive calls.

You have the 10.3.3.2050 radio installed?

Might as well try a 2163 autoloader, now.

[AhmetGuvencer]

is anyone having issues with the radio signal strength ? my connectivity is very low to my opeator compared to 10.3.2 and not available from time to time.. ?

[HaberNik]

I downloaded the new update ota (the 820mb one), and I swear my browser and everything is is moving much faster!

Right after install, I pulled up to Starbucks and opened the app, and it was very fast. Normally after a restart, the first time opening an Android app, I have to wait for the ART to load (green stays bar on a black screen) for a long time, but not this time.

I did however respond to a missed call with a text, put my phone down and then heard the sound of it ringing through on the end. I was accidently calling that number.

I kept pressing end call, and it would not end. Very frustrating. I ended up having to let the call go through and leave a message.

Not sure if this is connected to the update, but should never happen. If I hit end call, it should just end.



Posted via CB10

[Old_Mil]

OK.. so I've updated this on my Passport and the first thing that I notice is the keyboard light comes on then fades out.

Posted via CB10 on PassportSQW100-4/10.3.3.2163

Mine did this immediately after updating to 10.3.3...but after a few days had passed and a restart, it stopped.

[Old_Mil]

Anyone else having issues with in-app purchases?

I am using the Fongo voip app and had an issue with the in-app "remove ads" purchase procedure. I had originally purchased "remove ads" in a prior BB10 version. After updating to 10.3.3, wiping device and reinstall of Fongo app, restore of "remove ads" would not work.

I contacted the Fongo support site, and while helpful, did not have a solution and had not received any other complaints.

I was able to correct the issue by side loading a .bar for "sys.paymentsystem" 10.3.2 using Sachesi to replace the 10.3.3 version. After installation of the 10.3.2 version, the remove ads suppression worked immediately.

I am not sure if this is a Fongo/BlackBerry issue or if there are larger issues with revised version of the payment system.

I've had this problem with Fongo, and don't know of a solution.

[Old_Mil]

is anyone having issues with the radio signal strength ? my connectivity is very low to my opeator compared to 10.3.2 and not available from time to time.. ?

Mine was better with the initial 10.3.3 updated and now, like you, is worse with 10.3.3.1435.

For a small update that was only going to add a few security certifications there certainly seem to be a lot of moving parts.

[bh7171]

I downloaded the new update ota (the 820mb one), and I swear my browser and everything is is moving much faster!

Right after install, I pulled up to Starbucks and opened the app, and it was very fast. Normally after a restart, the first time opening an Android app, I have to wait for the ART to load (green stays bar on a black screen) for a long time, but not this time.

I did however respond to a missed call with a text, put my phone down and then heard the sound of it ringing through on the end. I was accidently calling that number.

I kept pressing end call, and it would not end. Very frustrating. I ended up having to let the call go through and leave a message.

Not sure if this is connected to the update, but should never happen. If I hit end call, it should just end.



Posted via CB10

Yes indeed much snappier. Excellent build in my usage. I simply prefer BlackBerry 10. I own the DTEK50 (and there is A LOT good about the phone) but I just can't seem to move my main line SIM from the Classic. This mobile device and OS fits my needs like a glove. I appreciate the updates BlackBerry-

Via the Cobalt Classic

[bh7171]

Mine was better with the initial 10.3.3 updated and now, like you, is worse with 10.3.3.1435.

For a small update that was only going to add a few security certifications there certainly seem to be a lot of moving parts.

Do a hard re-set or two. Once it settles I believe you will find it better.

Via the Cobalt Classic

[moyah8]

You have the 10.3.3.2050 radio installed?

Might as well try a 2163 autoloader, now.

Yes I think that's what was the problem..

I've since reverted back to PassportSQW100-4/10.3.3.2049 which in my experience offers more stability.. all is working now.


Posted via CB10 on PassportSQW100-4/10.3.3.2049

[moyah8]

Mine did this immediately after updating to 10.3.3...but after a few days had passed and a restart, it stopped.

Sorry, but after several security wipes and reboots the problem was still there. Grant it I didn't (and couldn't wait the days you suggested) . I guess that radio was a bit off!

Admittedly I made the first mistake of using a Z30 autoloader first! Oh, I now think I know why the keyboard fades on and off.. it happens when a "hint" comes up from BlackBerry.

(I've just noticed that "bb" then space nolonger auto completes to "BlackBerry")


Posted via CB10 on PassportSQW100-4/10.3.3.2049

[shorski]

So I discovered my pc was the reason BlackBerry Link was not opening. The pc got messed up somehow and I had to do a reset on it.
Now Link is opening fine. However, I tried backing up but it failed(Guess that's normal for 10.3.3)
Btw, I'm on Windows 10 insider build

[Mr Moes]

when i connect my BB passport to my pc with BB link to updagte my phone i get the following errorcode: A:0x000000A2]. What to do?

[kbalaz]

is anyone having issues with the radio signal strength ? my connectivity is very low to my opeator compared to 10.3.2 and not available from time to time.. ?

my radio strength has improved drastically. I was having issues with dropping the signal completely and in my basement of my house never got reception. Now I get LTE down there. Battery currently at 73% from yesterday morning at 7am. Medium usage. 2 year old Passport on the Bell Network in Canada

[bh7171]

when i connect my BB passport to my pc with BB link to updagte my phone i get the following errorcode: A:0x000000A2]. What to do?

Is your BlackBerry device unlocked or carrier branded? If it is truly unlocked update your device OTA (over the air) via WiFi.

Via the Cobalt Classic

[bh7171]

my radio strength has improved drastically. I was having issues with dropping the signal completely and in my basement of my house never got reception. Now I get LTE down there. Battery currently at 73% from yesterday morning at 7am. Medium usage. 2 year old Passport on the Bell Network in Canada

My Classic and Passport have been improved in these latest BlackBerry 10.3 builds. I was happy with 10.3.2 but these improvements are welcomed. The transitions between operations seem to be uber snappy and smooth. (Even moreso) Radio reception has always been exceptional with my Classic. And BlackBerry 10 devices (Z10, Z30 and Passport) in general. Hope the radio on my DTEK50 improves with updates on Android builds. It's not as strong as my BlackBerry 10 devices side to side on my second line. Battery life has improved under these latest 10.3.3 builds.

Via the Cobalt Classic

[hvacdon]

I've had this problem with Fongo, and don't know of a solution.

I was able to correct the issue by side loading a .bar for "sys.paymentsystem" 10.3.2 using Sachesi to replace the 10.3.3 version. After installation of the 10.3.2 version, the remove ads suppression worked immediately.

I think you didn't read my entire post?