[ralphbu]

Just wanna be sure about the stuffs I need to load.
I am using a Z3 this time.
Is the Core OS for Qualcom devices applicable? (I know this sounds stupid, but just want to get it right).
I'm referring to the link provided by TheOneCid
Will load it via Sachesi 1.2.1. Just the Core OS and Radio.
Can anyone affirm if this will be safe?

[jose_trevizo]

I'm going to use Sachesi for the very first time. Are there any additional tips other than what is shown on this guide http://forums.crackberry.com/bb10-le...achesi-904841/

[anon(8217400)]

how do i upgrade? Do i just run it? what is the radio thing for?

[juliankueh]

how do i upgrade? Do i just run it? what is the radio thing for?

If you're using an autoloader then just run it. It will install the OS and Radio.

Posted via CB10

[tryfe]

So is there actually a standalone bar file for IMS?

Posted via CB10

There is not.

[saxxman]

So I've read the entire thread, went ahead and did a Sachesi update and, low and behold, this version ends up having a visual voicemail version that doesn't play with Verizon.

CRAP! Have the same problem with 10.3 versions! Boy do I hate waiting!

Posted with my incredible Z30!

[valleyag]

So I've read the entire thread, went ahead and did a Sachesi update and, low and behold, this version ends up having a visual voicemail version that doesn't play with Verizon.

CRAP! Have the same problem with 10.3 versions! Boy do I hate waiting!

Posted with my incredible Z30!

Would that mean that it doesn't play with Verizon as a carrier or there phone. I've got a Verizon Z30 on AT&T. I was just downloading it on my computer.

Rockin Z30 on 10.2.1.3253 on AT&T

[torcheredsole56]

So for a Verizon z30, I load that qc8960 os link, and then load the z30 radio link for sachesi install, correct? Don't want to autoload this time. Also not worried about visual voicemail don't use it. Thanks sirjes and everyone.

Posted via CB10

[Mecca EL]

So is there actually a standalone bar file for IMS?

Posted via CB10

IMS is built into the radio file

[tryfe]

So for a Verizon z30, I load that qc8960 os link, and then load the z30 radio link for sachesi install, correct? Don't want to autoload this time. Also not worried about visual voicemail don't use it. Thanks sirjes and everyone.

Posted via CB10

Step 1: Radio
Step 2: Core OS
Step 3: Updated bars

That's how I do it.

[saxxman]

Seems that only the VVM is broken, for me, on this version.

As for non destructive install. I use the Sachesi codes and install the folder it creates.

Posted with my incredible Z30!

[torcheredsole56]

Step 1: Radio
Step 2: Core OS
Step 3: Updated bars

That's how I do it.

Thanks. I should know this but I always forget when I get excited to load something. so the "core os" link doesnt include the updated apps? I though debrick was OS only, and core os was os and bars?

EDIT: just re-read one of the steps for the earlier loads. still need the updated bars. so I need to sachesi download using codes and grab all of it and then load back via sachesi in the radio+OS+Bars sequence.

[tryfe]

Thanks. I should know this but I always forget when I get excited to load something. so the "core os" link doesnt include the updated apps? I though debrick was OS only, and core os was os and bars?

Core OS is just that; the core. Debrick has everything but when you load it in sachesi, it skips all the apps so you'd need to load the updated app bars to get the full OS loaded.

Posted via CB10

[deezy87]

Core OS is just that; the core. Debrick has everything but when you load it in sachesi, it skips all the apps so you'd need to load the updated app bars to get the full OS loaded.

Posted via CB10

Alternatively users can use their variant [if it happens to apply] and do the 'Download All' where it makes the folder you just drag and drop into Sachesi and it loads it up, I took this route.

[torcheredsole56]

Alternatively users can use their variant [if it happens to apply] and do the 'Download All' where it makes the folder you just drag and drop into Sachesi and it loads it up, I took this route.

Thanks to both. I'm using the download all method. and I feel shame for not remembering what I already knew. appreciate the help without going "dude, really!? youve done this before" :-)

[Mortimer Echavarria]

Not sure if it is placebo effect but I think animations are smoother and better than 10.2.1...

Posted via CB10

[deezy87]

Not sure if it is placebo effect but I think animations are smoother and better than 10.2.1...

Posted via CB10

Does the glass feel better, too? [It's a joke don't take it seriously in any degree]

[mrjmc99]

I've noticed that the VOLTE options aren't grayed out in the IMS settings on this build. Not sure if that's a good thing or not. I'm on Verizon and I don't think that they have rolled it out yet. I noticed that my battery drain is high at my house, where I don't get very good LTE signal. It's never an issue since I use Wifi and have a network extender that provides voice on 2g. But I think the phone kept trying to get LTE to get HD voice. I turned off VOLTE and my idle drain dropped significantly, similar to 10.2.1.3xxx. I haven't noticed any real change in coverage with the new radio yet. I am in an XLTE area, but I didn't notice any change when that went live a few months ago,i was hoping to get higher speeds, or better coverage inside buildings.

Z30STA100-3/10.2.2.1531

[tryfe]

Not sure if it is placebo effect but I think animations are smoother and better than 10.2.1...

Posted via CB10

I'm sure most of us have noticed the smoother (slower) transitioning effects.

Posted via CB10

[tdyhedge]

So I've read the entire thread, went ahead and did a Sachesi update and, low and behold, this version ends up having a visual voicemail version that doesn't play with Verizon.

CRAP! Have the same problem with 10.3 versions! Boy do I hate waiting!

Posted with my incredible Z30!

Yep! That's the only issue I have, VVM on Verizon. That's why I mentioned several post back I was surprised I was needing to set it up again. Of course that failed but just for giggles I got a hold of Verizon tech support and had them try re-provisioning my phone also. That didn't work either but it was worth a try. So maybe I'll mess around with the bars someday. All my voice mails are still there in the phone app and I can still call into my voice mail, so there really isn't any issue...it's more just a pita. All in all a good update. C'mon 10.3....

Via my simply amazing ? Q10 10.2.2.1531

[mrjmc99]

Yep! That's the only issue I have, VVM on Verizon. That's why I mentioned several post back I was surprised I was needing to set it up again. Of course that failed but just for giggles I got a hold of Verizon tech support and had them try re-provisioning my phone also. That didn't work either but it was worth a try. So maybe I'll mess around with the bars someday. All my voice mails are still there in the phone app and I can still call into my voice mail, so there really isn't any issue...it's more just a pita. All in all a good update. C'mon 10.3....

Via my simply amazing ? Q10 10.2.2.1531

You have to pay for VVM on Verizon correct?

Z30STA100-3/10.2.2.1531

[ralphbu]

Has anyone loaded up this OS on a Z3 and got positive results?

[banbeit]

Step 1: Radio
Step 2: Core OS
Step 3: Updated bars
That's how I do it.

I updated new OS by sachesi
My steps:
1.Core OS
2. Radio
3. All bar files.

[yhamaie]

when i am searching via Sachesi new 10.2.2 is there. Every thing is ok..but i am afraid about Carrier (Indosat)

Country 262 and Carrier 01 would point you to Deutsche Telekom, I suppose.

[tdyhedge]

You have to pay for VVM on Verizon correct?

Z30STA100-3/10.2.2.1531

Yeh. $2 or $3 for basic I think. They've some "premium" version too for more $$. What it does special, who knows. But I've stuck with them due to their cell coverage. Yeh, the fees bother me...I thought of that.

Via my simply amazing ? Q10 10.2.2.1531