[thurask]

If you have the latest Sachesi (which you should; if you don't have it, go get it, this thread'll still be here), you can pick the newest bolded thing down there and change the Download For drop-down to your device (if it isn't what's listed). Sachesi is smart enough to make the necessary changes to replace the device you searched with the device you want. That makes most of this graph redundant, but whatever.

If you have a STL100-1, pick the bolded STL100-1 set (or Z10 OMAP if Sachesi is new enough).
If you have a STL100-2/3/4 (aka Z10 QCOM) or any P9982, pick whichever one of those is bolded.
If you have any Q10, Q5 or P9983, pick whichever one of those is bolded.
If you have any Z30, Classic or Leap, pick whichever one of those is bolded.
If you have a Z3, pick the bolded Z3 set.
If you have a Passport, pick the bolded Passport set.

If you see two or more bolded values in one set, it's one carrier being irritating and using a different branch, producing a higher version number but older code. Or, BlackBerry getting the right idea and pushing the latest OS to (almost) everyone.

The underlined OS is the newest OS that's out there.

If you want to mix and match (ex. 10.2.1.2947 OS and 10.2.1.2229 radio), then make sure to delete the incorrect radio file according to Radio Type and replace it with the right one for your device. STL100-1 OSs go with the STL100-1, other Z10/Z30/Q10/Q5/P9982/P9983/Classic/Leap OSs go with each other, Z3 OSs go with the Z3 (as of 10.3.1) and Passport OSs go with the Passport.

Device	Type	Country	Carrier	Software	OS	Radio	Radio Type
Z10	STL100-1	404	001	10.3.2.2836	10.3.2.2876	10.3.2.2877	m5730
Z10	STL100-2	222	088	10.3.2.2836	10.3.2.2876	10.3.2.2877	qc8960
Z10	STL100-3	302	220	10.3.2.2474	10.3.2.2639	10.3.2.2640	qc8960
Z10	STL100-4	311	480	10.3.2.556	10.3.2.858	10.3.2.859	qc8960.omadm
P'9982	STK100-1	510	010	10.3.2.2836	10.3.2.2876	10.3.2.2877	qc8960
P'9982	STK100-2	N/A	N/A	N/A	N/A	N/A	qc8960
Q10	SQN100-1	302	220	10.3.2.2474	10.3.2.2639	10.3.2.2640	qc8960.wtr
Q10	SQN100-2	311	480	10.3.2.556	10.3.2.858	10.3.2.859	qc8960.wtr
Q10	SQN100-3	222	010	10.3.3.1463	10.3.3.2205	10.3.3.2206	qc8960.wtr
Q10	SQN100-4	310	120	10.3.2.2530	10.3.2.2813	10.3.2.2814	qc8960.wtr
Q10	SQN100-5	302	490	10.3.2.2474	10.3.2.2639	10.3.2.2640	qc8960.wtr
Q5	SQR100-1	302	220	10.3.2.2474	10.3.2.2639	10.3.2.2640	qc8960.wtr
Q5	SQR100-2	222	088	10.3.2.2836	10.3.2.2876	10.3.2.2877	qc8960.wtr
Q5	SQR100-3	510	010	10.3.2.2836	10.3.2.2876	10.3.2.2877	qc8960.wtr
P'9983	SQK100-1	510	010	10.3.2.2836	10.3.2.2876	10.3.2.2877	qc8960.wtr
P'9983	SQK100-2	N/A	N/A	N/A	N/A	N/A	qc8960.wtr
Z30	STA100-1	310	150	N/A	N/A	N/A	qc8960.wtr5
Z30	STA100-2	234	015	10.3.2.2836	10.3.2.2876	10.3.2.2877	qc8960.wtr5
Z30	STA100-3	311	480	10.3.2.556	10.3.2.858	10.3.2.859	qc8960.wtr5
Z30	STA100-4	310	120	N/A	N/A	N/A	qc8960.wtr5
Z30	STA100-5	302	220	10.3.2.2474	10.3.2.2639	10.3.2.2640	qc8960.wtr5
Z30	STA100-6	655	001	10.3.2.2836	10.3.2.2876	10.3.2.2877	qc8960.wtr5
Classic	SQC100-1	222	088	10.3.2.2836	10.3.2.2876	10.3.2.2877	qc8960.wtr5
Classic	SQC100-2	310	150	10.3.2.556	10.3.2.858	10.3.2.859	qc8960.wtr5
Classic	SQC100-3	311	480	10.3.2.556	10.3.2.858	10.3.2.859	qc8960.wtr5
Classic	SQC100-4	310	160	10.3.3.1463	10.3.3.2205	10.3.3.2206	qc8960.wtr5
Classic	SQC100-5	311	480	10.3.2.556	10.3.2.858	10.3.2.859	qc8960.wtr5
Leap	STR100-1	222	088	10.3.2.2836	10.3.2.2876	10.3.2.2877	qc8960.wtr5
Leap	STR100-2	302	220	10.3.2.2474	10.3.2.2639	10.3.2.2640	qc8960.wtr5
Z3	STJ100-1	404	001	10.3.2.2474	10.3.2.2639	10.3.2.2640	qc8930.wtr5
Z3	STJ100-2	730	001	10.3.1.1779	10.3.1.2576	10.3.1.2577	qc8930.wtr5
Passport	SQW100-1	302	610	10.3.3.1463	10.3.3.2205	10.3.3.2206	qc8974.wtr2
Passport	SQW100-2	311	480	N/A	N/A	N/A	qc8974.wtr2
Passport	SQW100-3	310	150	10.3.2.556	10.3.2.858	10.3.2.859	qc8974.wtr2
Passport	SQW100-4	N/A	N/A	N/A	N/A	N/A	qc8974.wtr2

If you see a newer OS for a device than what you see here, feel free to let me know so I can update the chart.

[Elite1]

Thanks Thurask, amazing work and very appreciated!

This is now a Sticky Thread in the BB10 Leaked/Beta OS Forum.

[BigBadWulf]

And one I know will be heavily utilized!

[jhanks64]

What the F do I have to do so that I can print this to PDF??!! I've tried FireFox, Internet Explorer and Chrome

[redchilli88]

Done with Firefox.

[jhanks64]

Done with Firefox.

What are you doing to only get the message and not the ad overlapping? All three browsers did similar things or didn't show the table at all.

[soyMisael]

Thank you soo much! Useful.

Posted via TheBATBerry Q10

[redchilli88]

jhanks64 Firefox add-on Nuke Anything Enhanced 1.0.2:-

https://addons.mozilla.org/en-US/fir...anced/?src=api

[jhanks64]

Looks great, but not updated for Firefox 28.

Thanks

[redchilli88]

I have 1.02 installed and it works on both FF 28 and 31.0a1.

You need to point your mouse at the border of an ad, right click, Remove this object and repeat the process like you're peeling off an onion.

Proof is in the attachment posted previously.

[thurask]

Turns out the build date for 10.2.1.2234 is two weeks after 10.2.1.2758, due to Sprint wanting the Z3 branch for some reason.

Chart updated for this contingency.

[akhenatongup]

Been looking all over for the combination for Q10 and .2947, could you help Thurask?

[zocster]

Been looking all over for the combination for Q10 and .2947, could you help Thurask?

Q10SQN100-3/10.2.1.3175 is out, why bother with old?

Sent from pin:2AD743B7 via Tapatalk

[akhenatongup]

hi, would prefer to install .2947, as well using the non-destructive option.

[mhhH4RI]

hi, would prefer to install .2947, as well using the non-destructive option.

You may download with Sachesi Tools with configuration :
Country : 510 (Indonesia)
Carrier : 001 (Indosat)
Device : Z3
Variant : STJ-100

Just click "Download All" and don't forget to remove the radio bar. You may try other 10.2.1 radio for Q10.

[mhhH4RI]

Thurask, just noticed that for Device Z3 (on bottom row) the carrier should be 001 (Indosat) instead of 010 (Telkomsel) which is not available yet.

[thurask]

Thurask, just noticed that for Device Z3 (on bottom row) the carrier should be 001 (Indosat) instead of 010 (Telkomsel) which is not available yet.

Noted.

[slagman5]

I have a question, I have a Q10 SQN100-1. Using that table, I find basically the exact version I just got from AT&T. Problem is, my phone has been very unstable after loading that. When I was using the 10.2.1.1924 leak, my phone was great. I was wondering if there is another version that would work on my phone that isn't the same one I have? I want to do a non-destructive install instead of a clean install like a regular leak this time just for time constraints...

Edit: Or if there is a way to install/reinstall just the bar files that controls the ambient light sensor and proximity sensor, that would be nice, those things are not working at all now that I updated. And I've noticed some more lagging than normal every once in a while since updating from the 1924 leak to the official AT&T 10.2.1...

[AlwaysActions]

Thanks Thurask

[sbmd]

I have a question, I have a Q10 SQN100-1. Using that table, I find basically the exact version I just got from AT&T. Problem is, my phone has been very unstable after loading that. When I was using the 10.2.1.1924 leak, my phone was great. I was wondering if there is another version that would work on my phone that isn't the same one I have? I want to do a non-destructive install instead of a clean install like a regular leak this time just for time constraints...

Edit: Or if there is a way to install/reinstall just the bar files that controls the ambient light sensor and proximity sensor, that would be nice, those things are not working at all now that I updated. And I've noticed some more lagging than normal every once in a while since updating from the 1924 leak to the official AT&T 10.2.1...

I would recommend backing up your device and using an autoloader to reinstall the latest OS. Then if you 'need' to you can restore your backup, but I recommend starting fresh and setting up your accounts again from scratch you will have a much better experience.

[slagman5]

I would recommend backing up your device and using an autoloader to reinstall the latest OS. Then if you 'need' to you can restore your backup, but I recommend starting fresh and setting up your accounts again from scratch you will have a much better experience.

Yah, problem with that is I lose all of the saved info from android games and apps, lol. If I copy and paste the android directory in the memory, would that keep all of that?

Posted without the aid of AutoCorrect with my physical keyboard via CB10

[slagman5]

So just needed to let you guys know, I'm an *****. Do you know why it wasn't detecting the sensors? Because the sensors were not there, lol. At around the same time AT&T updated to 10.2.1, I also happened to replace my screen at that time. Well, apparently I didn't notice that the sensor array was a separate piece that I had to transfer to the new screen. I just took it apart again today and looked at it and noticed that the module was missing. So I looked at the old screen and it had it, so I pulled it off that and put it on the new screen, put it back together, and voila, everything works... :-)

[jhanks64]

Glad you figured out your issues. I thought the Sprint Q10 update was the latest. I'm using OS 2758 on my VZW Q10.

[Superfly_FR]

For our US fellows Seems to rollout for Europe right now (Z30 as example).

[KporalBoyQ10]

For our US fellows Seems to rollout for Europe right now (Z30 as example).

Thanks for this share bro

Posted Via my Q10