What's wrong? It just keep restarting the device
Attachment 314982
Posted via CB10
Printable View
What's wrong? It just keep restarting the device
Attachment 314982
Posted via CB10
Can't guarantee it will work for you but my Z10 was doing the same thing. When the computer showed "resetting device" I had to shut my Z10 off with the power button and then the OS would load. Don't know why, but it worked. Next thing I knew the screen would show the OS loading and I would get the green light on the phone. All would work as expected from there. May be worth a try. Hope it helps.
Z10 100-4 Verizon / 10.3.1.1016
I'm sorry, meant to say when it showed "connecting to bootrom ".
Z10 100-4 Verizon / 10.3.1.1016
Tried but the phone looks like try to start the progress but fail, when I connect it to the pc turned off, it turns the red light on then the screen get off for like 10 seconds and then the phone turns on.
Someone made a bad autoloader
Posted via CB10
But thanks anyway for your help
Posted via CB10
You can easily make your own autoloader with either DBBT or Sachesi and the OS components. I'm not familiar with Sachesi; with DBBT you just click the autoloader tab, drag and drop all three into the window, name it and hit the create button. Spits out an autoloader in about 2 minutes.
Posted via CB10
Uffff
Last thurask autoloader that I download -_-
Posted via CB10
I usually use his, unless Bitcasa is playing up.
Posted via CB10
STL100-1 is a different version than STL100-2,3,4...make sure you download and install the correct one for YOUR phone.
Crackberry Genius on Verizon Z10/10.3.1.1151
The only autoloaders I'll use are the ones that Thurask puts up. Never had a problem. May have something to do with the 100-1. I have a Verizon 100-4 and his autoloaders have always worked perfectly. As a matter of fact, I wait until his are posted before loading a leak..... I think the 100-1 is a little quirky. Hope you get it worked out.
Z10 100-4 Verizon / 10.3.1.1016
Well finally after some several tries of different ways I got it working
Posted via CB10
Would be nice if you could tell us how you managed to get it to work.
May well help someone else in the future, after all, there are folks who have tried to help you out so maybe give a little back ?
Hmm
-Open Autoloader
-Restart your phone ( not connected to pc yet )
-when the screen turns black, or when it shows your carrier logo, connect the phone to pc ( not when it's already off )
- wait until the phone restart...
It would get it working. :) that's all I did.
If you read me thurask, I'm sorry.
Thanks :)
Glad to see you got it working. Also, takes a big man to say you're sorry. Good for you!!
Z10 100-4 Verizon / 10.3.1.1016
Put the phone In USB mode happens to me all the time
Posted via CB10
It's the way u have the phone connected to pc and the settings in the phone I've used auto loaders a million times mass storage needs to be turned off
Posted via CB10