[Lawrie Sherratt]

Thank you OP for the work and want to say it works perfectly. Z30 and Z10 running like smooth. Thank you again .

[Sime0n_S]

works fine on q10 ... bbm works too

[anon(4216826)]

Installed this blitz over the. 1016 version. 105 files were installed successfully. BBM and everything seems fine. Good luck and thanks for the effort of creating the archive

Posted via CB10

[niceup]

Try installing earlier version of bbm

Posted via my AzzazzinBerry (STL100-3/10.3.1.1151)

Thanks older version 10.4.5.73 and another one, still not working

[mohawk apple]

Need little help guys, I running sachesi then plugged in my bb and it's not connecting to it just saying detected 1 blackberry USB device(s) in Autodetect mode and that little round thing doesn't want to stop spinning lol. Seems like it's not connecting to my Z10! Thanks for any help

[iz_26]

Need little help guys, I running sachesi then plugged in my bb and it's not connecting to it just saying detected 1 blackberry USB device(s) in Autodetect mode and that little round thing doesn't want to stop spinning lol. Seems like it's not connecting to my Z10! Thanks for any help

I run into this issue also. My phone is currently on OS 10.3.1.1016

Posted via CB10

[mohawk apple]

I run into this issue also. My phone is currently on OS 10.3.1.1016

Posted via CB10

Yea Im on 1016 too. I restarted my phone and my pc (macbook pro) and still get that spinning thing! when i loaded up 1016 didn't have a problem.

[iz_26]

Yea Im on 1016 too.

Hopefully someone has a solution. The problem is you have to set your USB connection mode to Mac or Windows for Sachesi to recognize it, depending on what you have obviously, but 1016 doesn't have that option like previous builds. Smh

Posted via CB10

[anon(3987448)]

Thank you

[Superfly_FR]

Need little help guys, I running sachesi then plugged in my bb and it's not connecting to it just saying detected 1 blackberry USB device(s) in Autodetect mode and that little round thing doesn't want to stop spinning lol. Seems like it's not connecting to my Z10! Thanks for any help

I run into this issue also. My phone is currently on OS 10.3.1.1016

Posted via CB10

Be sure both Blend and Link are closed. Had some communication troubles, caused by Blend apparently.
May help.

[Mataras]

Thanks op! Downloading now! Let's hope I don't have any problems...

Posted via CB10

[delroyj]

I believe link has to be on your computer though closed for sachesi to work properly. Something to do with drivers


Posted via CB10

[Young Z]

Hopefully someone has a solution. The problem is you have to set your USB connection mode to Mac or Windows for Sachesi to recognize it, depending on what you have obviously, but 1016 doesn't have that option like previous builds. Smh

Posted via CB10

Since I upgraded from 10.2.* to 10.3.1.* I have noticed the USB connection mode options have been taken away. I used to set that option to "windows" for Sachesi to recognize the USB connection.

So for now when I want to use Sachesi this is what I do for it to recognize the USB connection:
-Install Link
-make sure Link is closed
-run Sachesi
-Install the new OS using Sachesi
-uninstall Link

The reason why I don't have Link installed all the time is because for some reason, it conflicts with my computer, video plays are slowed down and stutters, internet connections is sporadic. This happens as soon as I install Link and goes away as soon as I uninstall Link.

[GodGibson]

Since I upgraded from 10.2.* to 10.3.1.* I have noticed the USB connection mode options have been taken away. I used to set that option to "windows" for Sachesi to recognize the USB connection.

So for now when I want to use Sachesi this is what I do for it to recognize the USB connection:
-Install Link
-make sure Link is closed
-run Sachesi
-Install the new OS using Sachesi
-uninstall Link

The reason why I don't have Link installed all the time is because for some reason, it conflicts with my computer, video plays are slowed down and stutters, internet connections is sporadic. This happens as soon as I install Link and goes away as soon as I uninstall Link.

Go and download blackberry blend it's got an updated version of blackberry link with it and most of the bugs you describe are fixed try it out

[brookie229]

Thanks Robbenezer for your work here today. I've updated my z10 and Passport with no problems and will now use Blitz file as my main installation method. It works perfectly. I did have the small problem with Sachesi not finding my Passport for a bit but eventually (after closing out BB Link, I believe) it found the Passport and everything was then smooth. Thanks again!

[homer1475]

First time I've used one of these "Blitz" upgrade method.

I've got to say, very easy installation, nice and smooth.

Thanks go out to the OP for this.

[mohawk apple]

Go and download blackberry blend it's got an updated version of blackberry link with it and most of the bugs you describe are fixed try it out

This worked the first time rite after I downloaded blend! Thanks :-)

[Griffyj]

Installed over 1016 and everything seems to be working fine, it installed 98 files. Took about a hour and ahalf to do the download and install. Thanks for the update.

[azn_math]

Need little help guys, I running sachesi then plugged in my bb and it's not connecting to it just saying detected 1 blackberry USB device(s) in Autodetect mode and that little round thing doesn't want to stop spinning lol. Seems like it's not connecting to my Z10! Thanks for any help

I was plagued by this problem all day, and finally while checking to make sure USB mass storage mode wasn't on I noticed a setting for USB Mode

Settings > Storage and Access. In the USB Mode section, I had to change it from 'Automatic' to 'Connect with Windows'.

Sachesi finally stopped spinning and detected my Z10 almost immediately.

[FF22]

How "patient while the installation zip is extracted" is PATIENT? It's probably been going for 15 minutes or so...

Oh, that prompt disappeared and then Windows shows "Sachesi UNresponsive".....

Ah, things are happening. (fingers crossed - I'll throw the time in here so I can kind of recall how long it takes: 3:39pm)....

[anon(8445214)]

How "patient while the installation zip is extracted" is PATIENT? It's probably been going for 15 minutes or so...

Blame your hdd not Sachesi!

___

[delroyj]

I'm trying to load blitz on z10 st l 100-1 however I'm receiving an error "your device is reporting no radio. The blitz install is unable to detect the correct radio for your system and cannot continue" I've already upgraded a z30 via the same process with no issues. Thoughts anyone?

Posted via CB10

[Jimberry Storm]

Thanks, but do you have to be running a 10.3 or 1.3.1 already, or will this work on any already installed OS? thanks again.

[delroyj]

To clarify, attempting to upgrade from 10.2.1.

Posted via CB10

[Robbenezer]

I'm trying to load blitz on z10 st l 100-1 however I'm receiving an error "your device is reporting no radio. The blitz install is unable to detect the correct radio for your system and cannot continue" I've already upgraded a z30 via the same process with no issues. Thoughts anyone?

Posted via CB10

Radio should be in there I checked to ensure before zipping it. No one else has reported the issue that I've seen so far. Did you extract zip folder or drag the zip directly over to sachesi?

I'll check again, but either way maybe download just the stl-1 radio and toss it in the folder.

EDIT: yup it's in there lol m5730-10.3.1.1152.... file

Posted via my AzzazzinBerry (STL100-3/10.3.1.1151)