[rasputintin]

HI there,

I have tried searchching but can't seem to find an answer to my problem - I have used an autoloader to load teh latest 10.3.1.652 on my Q10...so far love the features, battery life is millions of times better than official latest 10.2...but i have some n00b questions. In the Hub, i can't seem to get Notifications to open (ie the messages with a bell/alarm symbol...it just says 'Error Date label error' in the title and below 'This message can't be opened'. This causes problems with Hub++ for example as I can't associate accounts with Hub++. Any workarounds?

Also, i am having trouble restoring my settings and apps from BB Link...is this because some of these apps are android apps? should i deselect the android apps? I have tried just the settings restore but LInk says that the 'operation was rejected, please ensure your blackberrry is connected and try again' or something to that effect.

by all means tell me to rtfm, if you say these probs are dicumented then i'm happy to read around the forums.

Thanks,

Mark

[ymb]

Try resetting your hub by swiping down from the top right corner towards the bottom left like 5 times

Z30STA100-3/10.2.1.3289

[rasputintin]

Hey, thanks (really neat trick, never knew that!) but still playing up. Tbh I could just backup and reload later when I get home but wanted to make sure it wasn't going to happen again

Posted via CB10

[rasputintin]

Bump

Posted via CB10

[mainely_linux]

I cant open my android notifications. If I get one for say "development mode is on" or some other Blackberry function I can open it. Not sure if this is related to your problem, but I take the good with the bad when it comes to leaks. Im on 10.3.1.1016. Opening the actual android app makes the notice go away.

Try a clean install with no restore to see if anything changes. That will rule in/out your backup file and related backup choices.

[rasputintin]

Ah thanks for your reply mainely, that was the attitude I was approaching with this too tbh...done many android rom changes in the past but never felt the need to leak up my bb...but I saw that the batter life was good on this and I couldn't wait the everlasting time for the official update so thought I would take the plunge! It's a very nice update aside from the aforementioned niggles, some great new features.

Interesting you have a similar issue with the notifications, I might try and reload the whole thing again and let you know what happens . It is a fresh install btw, I can't actually get Link to restore anything. Is that normal?

Posted via CB10

[mainely_linux]

I can't actually get Link to restore anything. Is that normal?

Posted via CB10

Make sure you have the latest link installed, and have installed the new usb driver set. http://l.bitcasa.com/EHaKbb7f

[rasputintin]

Ah nice one, I'll try this when I get back tonight

Posted via CB10

[n8tiveg]

I've had intermittent problems with that on various leaks most of the times it's after I let the battery die down all the way and it turns offor after turning it on after I had it off. I think it's just the way it loads it show the notifications but it isn't loaded all the way. AS I usually can open them after everything is on for a bit

Posted via CB10

[Ibegbulem Onyebuchi]

I've had problems with Android Notifications..
This is how I fixed mine

* Install Android Bar(s) from OS 10.3.1.632
*Reboot Device and Open Any Android App
*Install Android Bar(s) from IS 10.3.1.938
*Reboot device and Tadaah..

It's working..

And this is how it now opens..




Posted via CB10

[Horison Expedisi]

I've had problems with Android Notifications..
This is how I fixed mine

* Install Android Bar(s) from OS 10.3.1.632
*Reboot Device and Open Any Android App
*Install Android Bar(s) from IS 10.3.1.938
*Reboot device and Tadaah..

It's working..

And this is how it now opens..




Posted via CB10

Can you kindly link/upload the files needed?
Thanks.

[Ibegbulem Onyebuchi]

Edited

Extract the Android Bars From http://goo.gl/BT9SFN
Use Sachesi to Install
Reboot Your Device, Open Any Android App

Use DBBT tools to Extract Android Bars From OS 10.3.1.1016
Get the Autoloader here http://forums.crackberry.com/bb10-le...evices-972508/

Use Sachesi to Install the Android Bars Extracted
Reboot Device and then Open any Android App

NB: I used Sachesi Alpha Version 2.0 to install so tick the 'Allow Downgrade' Button to Enable you install..

You can search for Sachesi 2.0 and DBBT tools in the forum

Good luck...

Posted via CB10

[Crabamer]

Ibegbulem , we don't have the autoloaders, can you please upload the files ? thanks.

[anon(4297019)]

Ibegbulem , we don't have the autoloaders, can you please upload the files ? thanks.

http://forums.crackberry.com/showthread.php?t=972508

Z10 STL 100-3 OS 10.3.1.1016

[Horison Expedisi]

Edited

Extract the Android Bars From
Use Sachesi to Install
Reboot Your Device, Open Any Android App

Use DBBT tools to Extract Android Bars From OS 10.3.1.1016
Get the Autoloader here

Use Sachesi to Install the Android Bars Extracted
Reboot Device and then Open any Android App

NB: I used Sachesi Alpha Version 2.0 to install so tick the 'Allow Downgrade' Button to Enable you install..

You can search for Sachesi 2.0 and DBBT tools in the forum

Good luck...

Posted via CB10

Thanks a lot.

[kingofdirt]

Edited

Extract the Android Bars From http://goo.gl/BT9SFN
Use Sachesi to Install
Reboot Your Device, Open Any Android App

Use DBBT tools to Extract Android Bars From OS 10.3.1.1016
Get the Autoloader here 10.3.1.1016 autoloaders for all devices - BlackBerry Forums at CrackBerry.com

Use Sachesi to Install the Android Bars Extracted
Reboot Device and then Open any Android App

NB: I used Sachesi Alpha Version 2.0 to install so tick the 'Allow Downgrade' Button to Enable you install..

You can search for Sachesi 2.0 and DBBT tools in the forum

Good luck...

Posted via CB10

Thank you for the files.

But didn't work for me. :/

[lyricidal]

Also didn't work for me either, was worth a shot

Thanks for your efforts

Posted via CB10

[codeslinga]

Edited

Extract the Android Bars From http://goo.gl/BT9SFN
Use Sachesi to Install
Reboot Your Device, Open Any Android App

Use DBBT tools to Extract Android Bars From OS 10.3.1.1016
Get the Autoloader here 10.3.1.1016 autoloaders for all devices - BlackBerry Forums at CrackBerry.com

Use Sachesi to Install the Android Bars Extracted
Reboot Device and then Open any Android App

NB: I used Sachesi Alpha Version 2.0 to install so tick the 'Allow Downgrade' Button to Enable you install..

You can search for Sachesi 2.0 and DBBT tools in the forum

Good luck...

Posted via CB10

Thanks, but I'm not sure if the Android runtime files I downloaded from your link are for 10.3.1.938? Can you confirm
these are the correct ones?

[Ibegbulem Onyebuchi]

Thanks, but I'm not sure if the Android runtime files I downloaded from your link are for 10.3.1.938? Can you confirm
these are the correct ones?

The First one is for OS 10.3.1.938

Posted via CB10

[Horison Expedisi]

The First one is for OS 10.3.1.938

Posted via CB10

It's not working. Thanks anyway.

[Ibegbulem Onyebuchi]

You guys have to load the Two Android Bars

Load the first bar, reboot open any Android app (v 10.3.1.110)

Load the 2nd bar, reboot the open Android apps.. (v10.3.1.128)

Sorry for those saying it ain't working.. but that's how I got to revive mine.. worked for me..

Maybe you guys don't get the whole process..

Posted via CB10

[Gearheadaddy]

Known issue on that os...update to 10.3.1.1016 to fix.

Crackberry Genius on Verizon 10.3.1.1016

[kingofdirt]

I AM on 1016, the problem just appeared after installing 1016.

@OP
Which single .bar do you mean? The runtime install files are 2 .bars (one small one, one big one).

[Ibegbulem Onyebuchi]

I AM on 1016, the problem just appeared after installing 1016.

@OP
Which single .bar do you mean? The runtime install files are 2 .bars (one small one, one big one).

Install the two Android Bar(s) in the file I uploaded (v 10.3.1.110!
Open Any Android App

Then Install the Android Bar(s) from OS 10.3.1.1016

Posted via CB10

[kingofdirt]

Install the two Android Bar(s) in the file I uploaded (v 10.3.1.110!
Open Any Android App

Then Install the Android Bar(s) from OS 10.3.1.1016

Posted via CB10

Just to understand the whole procedure, installing the second runtime bars while running an open android app?