i just got it workingt YES FREE tethering is back the grayed out part of VZW over tethering MHS is not gray anymore thanks to caltrmptguy86
http://forums.crackberry.com/blackbe...creens-793184/
Printable View
i just got it workingt YES FREE tethering is back the grayed out part of VZW over tethering MHS is not gray anymore thanks to caltrmptguy86
http://forums.crackberry.com/blackbe...creens-793184/
Not working at my side STL 100-1/ DiGi Malaysia.
Loaded 811 radio on Verizon STL-100-4 and now hotspot connects. Would not connect on 1048 radio. Hopefully everything will continue to work with 811 radio and full 1047 OS.
Dumb question. How do I know is loaded the 811 radio correctly? I tried to but it still doesn't work for me.
Posted via CB10
That's because the 811 radio doesn't fix the issue.
The problem is not with the radio but with the settings app.
If the radio in the "about" is 811, you have 811 radio.
Posted via CB10
I'm using the 1047 radio and yet using the workaround I found, I managed to open the Hotspot once
Posted via CB10
You can open it once every time you restart after using the tether once.
Posted via CB10
Interesting. I re-loaded 1048 radio and it does connect once after restarting to hotspot, but once hotspot is turned off it will not re-connect unless phone is restarted. At least in a pinch I can connect. Hopefully this will be fixed in next 10.2 release.
It looks like the Z version still has the settings app a work in progress. This is causing the wifi to crash. Remember that the OS is not a release version but a beta leak.
Posted via CB10
Do you have the autoloader? Can you post it.
Posted via CB10
To complete my report here, the performance I found with various options:
-Rogers LTE Vancouver, BC
-test using speedtest.net on a windows 7 notebook
1. Mobile hotspot - 13Mbps download/15Mbps upload, best performance
2. USB tethering - 13Mbps download/13Mbps upload, similar performance to hotspot, I think will save some battery, but need a wire
3. Bluetooth tethering - 1Mbps download/1.3 Mbps upload, disappointing performance, no wires, best battery
Stl100-2 base network belgium: hotspot not working anymore, tethering working but losing connection a lot
Posted via CB10
Verizon USA Q10 SQ100 tethering stopped working after .1047 then installed sideloaded old escreen and the option to turn off verizon tethering came back. now all is fine i can turn on and off with no problem and no fee paid to verizon
Well, I finally fixed my ATT STL100-3 using the e-screen method. All I did was turn on the modem and it worked. Granted I only get one per phone restart but it works. I can live with that until we get an OS that fixes permanently.
Cheers!
Richard
It is not working for me... it will simply crashed after keying the APN.
Are you trying using escreen? If so no need to change apn or manipulate. Just turned on modem.
Posted via CB10
Worked for me on my Q10.
Posted via CB10
not working in here STL100-1 ,
hope for the fix and new leak soon :)
First run didn't work but just tried again and worked fine...
Posted via CB10
Works great with SQN-3 on Telia in Sweden.
VPN not tested yet.
/Per
Posted via CB10 @ SQN-3 10.2.0.1047
so are you saying I can just run this autoloader and its not designed to wipe all the data on the phone?
Z10 STL100-3 Works for me after a restart of the phone , one time, then cannot establish another hotspot session. Mobile Hotspot page stays blank after moving the selector to on. Times out after about 15 minutes of connection while on battery and need to restart the phone to establish another Hotspot session. Interestingly enough, while plugged in to the charger, the hotspot does not time out, but still only allows one connection before needing to restart.
Did you do anything special to make it work?
Posted via CB10
Working on Q10
10.2.0.1047
SQN100-2
Verizon, USA
Works great for me too
Posted via CB10